B310s-22 dead after flashing usbloader

[Sultanpepper]

Hello,

 I have flashed a B310s-22 with a usbloader file with Balong usb while attempting to unlock the router. As a result the router is stuck in emergency mode ( no leds working and one COM port working ). I've tried to flash several usbloader files and fixes and each gave as symptom as follows :

1. Power Led working, only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.

2. Power Led works for a couple of seconds then turns off , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.

3. No Led works , 2 COM ports working and Huawei modem appears in device manager,cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 detects but fails to write the firmware.

4. Ethernet Led blinks periodically , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.


If i reset power form router it starts in emergency mode again with no leds as stated above.

I would really appreicate if anyone with experience or insight to help out.

Regards

[droidmobitech]

Hello,

 I have flashed a B310s-22 with a usbloader file with Balong usb while attempting to unlock the router. As a result the router is stuck in emergency mode ( no leds working and one COM port working ). I've tried to flash several usbloader files and fixes and each gave as symptom as follows :

1. Power Led working, only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.

2. Power Led works for a couple of seconds then turns off , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.

3. No Led works , 2 COM ports working and Huawei modem appears in device manager,cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 detects but fails to write the firmware.

4. Ethernet Led blinks periodically , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.


If i reset power form router it starts in emergency mode again with no leds as stated above.

I would really appreicate if anyone with experience or insight to help out.

Regards

Read Pm and prepare for Remote Assistance

[droidmobitech]

Hello,

 I have flashed a B310s-22 with a usbloader file with Balong usb while attempting to unlock the router. As a result the router is stuck in emergency mode ( no leds working and one COM port working ). I've tried to flash several usbloader files and fixes and each gave as symptom as follows :

1. Power Led working, only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.

2. Power Led works for a couple of seconds then turns off , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.

3. No Led works , 2 COM ports working and Huawei modem appears in device manager,cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 detects but fails to write the firmware.

4. Ethernet Led blinks periodically , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.


If i reset power form router it starts in emergency mode again with no leds as stated above.

I would really appreicate if anyone with experience or insight to help out.

Regards

Read Pm and prepare for Remote Assistance

Device has been successfully repaired and Unlocked

All Done

Problem Solved

[droidmobitech]

PCB Image

[Sultanpepper]

Modem recovered and unlocked in no time by @droidmobitech , i am quite pleased with the professional work done here and would come back again for any assistance/repairs.

[enac]

Hello,

 I have flashed a B310s-22 with a usbloader file with Balong usb while attempting to unlock the router. As a result the router is stuck in emergency mode ( no leds working and one COM port working ). I've tried to flash several usbloader files and fixes and each gave as symptom as follows :

1. Power Led working, only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.

2. Power Led works for a couple of seconds then turns off , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.

3. No Led works , 2 COM ports working and Huawei modem appears in device manager,cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 detects but fails to write the firmware.

4. Ethernet Led blinks periodically , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.


If i reset power form router it starts in emergency mode again with no leds as stated above.

I would really appreicate if anyone with experience or insight to help out.

Regards

Read Pm and prepare for Remote Assistance

Device has been successfully repaired and Unlocked

All Done

Problem Solved

Please help me, I have the same problem with the same modem.

[droidmobitech]

Hello,

 I have flashed a B310s-22 with a usbloader file with Balong usb while attempting to unlock the router. As a result the router is stuck in emergency mode ( no leds working and one COM port working ). I've tried to flash several usbloader files and fixes and each gave as symptom as follows :

1. Power Led working, only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.

2. Power Led works for a couple of seconds then turns off , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.

3. No Led works , 2 COM ports working and Huawei modem appears in device manager,cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 detects but fails to write the firmware.

4. Ethernet Led blinks periodically , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.


If i reset power form router it starts in emergency mode again with no leds as stated above.

I would really appreicate if anyone with experience or insight to help out.

Regards

Read Pm and prepare for Remote Assistance

Device has been successfully repaired and Unlocked

All Done

Problem Solved

Please help me, I have the same problem with the same modem.

@enac ;

For remote assistance; you will need team viewer and good internet speed

[enac]

My WHATSAPP +237699507280

Envoyé de mon One en utilisant Tapatalk

[enac]

Hello,

 I have flashed a B310s-22 with a usbloader file with Balong usb while attempting to unlock the router. As a result the router is stuck in emergency mode ( no leds working and one COM port working ). I've tried to flash several usbloader files and fixes and each gave as symptom as follows :

1. Power Led working, only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.

2. Power Led works for a couple of seconds then turns off , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.

3. No Led works , 2 COM ports working and Huawei modem appears in device manager,cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 detects but fails to write the firmware.

4. Ethernet Led blinks periodically , only one COM port and cannot flash any firmware , DC unlocker doesnt detect anything and Huawei Flasher 1.6 and V2 as well ... nothing works.


If i reset power form router it starts in emergency mode again with no leds as stated above.

I would really appreicate if anyone with experience or insight to help out.

Regards

Read Pm and prepare for Remote Assistance

Device has been successfully repaired and Unlocked

All Done

Problem Solved

Please help me, I have the same problem with the same modem.

@enac ;

For remote assistance; you will need team viewer and good internet speed

THanks, it worked 

[tchekAmar]

Hello,
Please help me, I have the same problem with the same modem.