Hovatek Forum MOBILE Android [Please help] R831K NEO 3
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Please help] R831K NEO 3

[Please help] R831K NEO 3

Pages (3): Previous 1 2 3 Next
hovatek
hovatek
hovatek
Administrator
49,570
24-12-2018, 04:20 PM
#11



(21-12-2018, 08:42 PM)sixstails0075 Thank you so much for the brilliant idea, its always comes out of my mind that there is a short on the board, but when i google it it is almost all software issue , i try to clean the board now but i still ask how is the proper way of cleaning and shorting the board..
Thanks More POWER

Does it vibrate continuously (like an alarm clock) or at intervals?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
sixstails0075
sixstails0075
sixstails0075
Respected Member
113
24-12-2018, 05:33 PM
#12
it will continously vibrate about 15 sec. just only one long vibrate and it will followed by short vibrate 10 sec interval, but when i plug in the charger its only vibrate one short vibrate every 10sec.
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
25-12-2018, 08:17 PM
#13
Answer my questions
hovatek
hovatek
hovatek
Administrator
49,570
26-12-2018, 11:24 AM
#14
(24-12-2018, 05:33 PM)sixstails0075 it will continously vibrate about 15 sec. just only one long vibrate and it will followed by short vibrate 10 sec interval, but when i plug in the charger its only vibrate one short vibrate every 10sec.

Sounds like a power related issue

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
sixstails0075
sixstails0075
sixstails0075
Respected Member
113
27-12-2018, 05:22 PM
#15



good day sir, i try to flash the firmware the youve given me, and i use wiselink tool at the of flashing and error chcksum error 1041
sixstails0075
sixstails0075
sixstails0075
Respected Member
113
27-12-2018, 05:25 PM
#16
log of wiselinktool

Code:

2018-12-28 00:05:01 [INFO]    -------strart  USB ComPort Thread ------------------------
2018-12-28 00:05:01 [INFO]    ==================================================
2018-12-28 00:05:01 [INFO]    WiseLinkTool v5.8.0.56
2018-12-28 00:05:01 [INFO]    Build 0056 on Nov 10 2015
2018-12-28 00:05:01 [INFO]    Brom library v7.1529.3.0
2018-12-28 00:05:01 [INFO]    Download agent v3.3001.0.2015
2018-12-28 00:05:01 [INFO]    Eboot library v1.1148.0.0
2018-12-28 00:05:01 [INFO]    Meta library v6.1120.0.0
2018-12-28 00:05:01 [INFO]    Inet library v1.4.3.2
2018-12-28 00:05:01 [INFO]    SLA library v1.0.0.15
2018-12-28 00:05:01 [INFO]    CheckAction library v1.3.0.4
2018-12-28 00:05:01 [INFO]    ==================================================
2018-12-28 00:07:11 [INFO]    Scatter File Info ---------------------
name = MTK_PLATFORM_CFG;
version = V1.1.1 ;
platform = MT6572 ;
project = OPPO72_14079  
storage = EMMC ;
bootChannel = MSDC_0 ;
blockSize = 0x20000
-----------
2018-12-28 00:07:11 [INFO]    EmmcType is Linear Emmc type
2018-12-28 00:07:11 [INFO]    Not Find Checksum.ini !
2018-12-28 00:07:11 [INFO]    CheckSum start-----------------------
2018-12-28 00:07:12 [INFO]    Create CheckSum Rom(PRELOADER) = chksum(da0e)
2018-12-28 00:07:12 [INFO]    Create CheckSum Rom(MBR) = chksum(8aa)
2018-12-28 00:07:12 [INFO]    Create CheckSum Rom(EBR1) = chksum(ae1)
2018-12-28 00:07:12 [INFO]    Create CheckSum Rom(UBOOT) = chksum(bb0f)
2018-12-28 00:07:12 [INFO]    Create CheckSum Rom(BOOTIMG) = chksum(a7d1)
2018-12-28 00:07:12 [INFO]    Create CheckSum Rom(RECOVERY) = chksum(d45a)
2018-12-28 00:07:12 [INFO]    Create CheckSum Rom(SEC_RO) = chksum(146b)
2018-12-28 00:07:12 [INFO]    Create CheckSum Rom(LOGO) = chksum(1e73)
2018-12-28 00:07:12 [INFO]    Create CheckSum Rom(EBR2) = chksum(5c8)
2018-12-28 00:07:12 [INFO]    Create CheckSum Rom(ANDROID) = chksum(1111)
2018-12-28 00:07:12 [INFO]    Create CheckSum Rom(CACHE) = chksum(4465)
2018-12-28 00:07:12 [INFO]    Create CheckSum Rom(USRDATA) = chksum(ebb)
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(0), rom(PRELOADER), chksum(da0e).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(1), rom(MBR), chksum(8aa).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(2), rom(EBR1), chksum(ae1).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(3), rom(PRO_INFO), chksum(0).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(4), rom(NVRAM), chksum(0).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(5), rom(PROTECT_F), chksum(0).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(6), rom(PROTECT_S), chksum(0).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(7), rom(SECCFG), chksum(0).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(8), rom(UBOOT), chksum(bb0f).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(9), rom(BOOTIMG), chksum(a7d1).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(10), rom(RECOVERY), chksum(d45a).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(11), rom(SEC_RO), chksum(146b).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(12), rom(MISC), chksum(0).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(13), rom(LOGO), chksum(1e73).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(14), rom(EBR2), chksum(5c8).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(15), rom(OPPO_CUSTOM), chksum(0).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(16), rom(RESERVE1), chksum(0).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(17), rom(RESERVE2), chksum(0).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(18), rom(EXPDB), chksum(0).
2018-12-28 00:07:12 [INFO]    CheckSum: Android index(19), rom(ANDROID), chksum(1111).
2018-12-28 00:07:13 [INFO]    CheckSum: Android index(20), rom(CACHE), chksum(4465).
2018-12-28 00:07:13 [INFO]    CheckSum: Android index(21), rom(USRDATA), chksum(ebb).
2018-12-28 00:07:40 [INFO]    g_com = 0,serial_number = 5&2519928c&0&4,  pid_vid = vid_0e8d&pid_0003
2018-12-28 00:07:40 [DEBUG]   [COM8]Arrival MTK USB Port (COM8) \\?\usb#vid_0e8d&pid_0003#5&2519928c&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
2018-12-28 00:07:44 [INFO]    [COM8]DL_GetBMTBlockCount() , bmt_block_count = 168 ;WLT.cpp 1000
2018-12-28 00:07:44 [INFO]    Nand Flash pagesize = 0x0
2018-12-28 00:07:44 [INFO]    [COM8] Hardware detecting report:
--------------------------------------------------------------------------------

BBCHIP: "MT6572_S00", EXT_26M
CODE(0x6572), VER(0xCA00), SW(0x0000)
--------------------------------------------------------------------------------

EMMC_DETECTION: "S_DONE"(0)
--------------------------------------------------------------------------------
EMMC_PRODUCT_NAME: "HYNIX 0x483447316404"
EMMC_ID: 0x90014A4834473164040503A2B9A3A1B5
EMMC_BOOT1_SIZE: Size = 0x00400000(4MB)
EMMC_BOOT2_SIZE: Size = 0x00400000(4MB)
EMMC_RPMB_SIZE: Size = 0x00400000(4MB)
EMMC_GP1_SIZE: Size = 0x00000000(0MB)
EMMC_GP2_SIZE: Size = 0x00000000(0MB)
EMMC_GP3_SIZE: Size = 0x00000000(0MB)
EMMC_GP4_SIZE: Size = 0x00000000(0MB)
EMMC_USER_SIZE: Size = 0x00000000E9000000(3GB)

EXT_RAM_DETECTION: "S_DONE"(0)
--------------------------------------------------------------------------------
EXT_RAM_TYPE: "DRAM"
EXT_RAM_CHIP-SEL: "CS_0"
EXT_RAM_SIZE: 8192Mb (0x40000000)

INT_SRAM_DETECTION: "(null)"(1753603724)
--------------------------------------------------------------------------------
INT_SRAM_SIZE: (null) (0x10D0C120)

2018-12-28 00:07:44 [INFO]    Storage = 2
2018-12-28 00:07:44 [DEBUG]   [COM8]EnterCriticalSection LoadRomAll()
2018-12-28 00:07:44 [DEBUG]   [COM8]DL Is Ready, no need to LoadRomAll again.
2018-12-28 00:07:44 [DEBUG]   [COM8]LeaveCriticalSection LoadRomAll()
2018-12-28 00:07:44 [INFO]    [COM8]Format userdata zone now  ...... StoryType[2] BeginAddr[0x47D80000] Length[0x9FD80000]
2018-12-28 00:07:46 [INFO]    [COM8]FlashTool_Format() :USERDATA partition FORMAT successfully !
2018-12-28 00:07:46 [INFO]    [COM8]Switch to High speed com port
2018-12-28 00:07:46 [INFO]    [COM8]Waitting for DA USB VCOM Port
2018-12-28 00:07:46 [INFO]    [COM0]'s
2018-12-28 00:07:46 [DEBUG]   [COM8]Remove MTK USB Port (COM8) \\?\usb#vid_0e8d&pid_0003#5&2519928c&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
2018-12-28 00:07:48 [INFO]    [COM10]Change to DA USB VCOM Port (COM10)
2018-12-28 00:07:48 [ERROR]    FlashTool_ReadPartitionCount retrun  ERROR   ret = 5073
2018-12-28 00:07:48 [INFO]    [COM10]Download now...
2018-12-28 00:09:11 [ERROR]   [COM10]FlashTool_Download() failed code 4008 WLT.cpp 2071
2018-12-28 00:09:11 [DEBUG]   FlashTool_Disconnect begin
2018-12-28 00:09:11 [INFO]    [COM0]'s
2018-12-28 00:09:11 [DEBUG]   [COM10]Remove DA USB VCOM Port (COM10) \\?\usb#vid_0e8d&pid_2001#5&2519928c&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
2018-12-28 00:09:22 [DEBUG]   FlashTool_Disconnect end return:0
2018-12-28 00:09:22 [ERROR]   _ERROR: S_FT_DOWNLOAD_FAIL (Error code = 4008)
2018-12-28 00:09:47 [DEBUG]   [COM0]EnterCriticalSection Get_Remote_All_Files()
2018-12-28 00:09:47 [DEBUG]   [COM0]LeaveCriticalSection Get_Remote_All_Files()
2018-12-28 00:10:17 [INFO]    [COM8]DL_GetBMTBlockCount() , bmt_block_count = 168 ;WLT.cpp 1000
2018-12-28 00:10:17 [INFO]    Nand Flash pagesize = 0x0
2018-12-28 00:10:17 [INFO]    [COM8] Hardware detecting report:
--------------------------------------------------------------------------------

BBCHIP: "MT6572_S00", EXT_26M
CODE(0x6572), VER(0xCA00), SW(0x0000)
--------------------------------------------------------------------------------

EMMC_DETECTION: "S_DONE"(0)
--------------------------------------------------------------------------------
EMMC_PRODUCT_NAME: "HYNIX 0x483447316404"
EMMC_ID: 0x90014A4834473164040503A2B9A3A1B5
EMMC_BOOT1_SIZE: Size = 0x00400000(4MB)
EMMC_BOOT2_SIZE: Size = 0x00400000(4MB)
EMMC_RPMB_SIZE: Size = 0x00400000(4MB)
EMMC_GP1_SIZE: Size = 0x00000000(0MB)
EMMC_GP2_SIZE: Size = 0x00000000(0MB)
EMMC_GP3_SIZE: Size = 0x00000000(0MB)
EMMC_GP4_SIZE: Size = 0x00000000(0MB)
EMMC_USER_SIZE: Size = 0x00000000E9000000(3GB)

EXT_RAM_DETECTION: "S_DONE"(0)
--------------------------------------------------------------------------------
EXT_RAM_TYPE: "DRAM"
EXT_RAM_CHIP-SEL: "CS_0"
EXT_RAM_SIZE: 8192Mb (0x40000000)

INT_SRAM_DETECTION: "(null)"(1753603724)
--------------------------------------------------------------------------------
INT_SRAM_SIZE: (null) (0x0E89BFF8)

2018-12-28 00:10:17 [INFO]    Storage = 2
2018-12-28 00:10:17 [DEBUG]   [COM8]EnterCriticalSection LoadRomAll()
2018-12-28 00:10:17 [DEBUG]   [COM8]DL Is Ready, no need to LoadRomAll again.
2018-12-28 00:10:17 [DEBUG]   [COM8]LeaveCriticalSection LoadRomAll()
2018-12-28 00:10:17 [INFO]    [COM8]Format userdata zone now  ...... StoryType[2] BeginAddr[0x47D80000] Length[0x9FD80000]
2018-12-28 00:10:18 [INFO]    [COM8]FlashTool_Format() :USERDATA partition FORMAT successfully !
2018-12-28 00:10:18 [INFO]    [COM8]Switch to High speed com port
2018-12-28 00:10:19 [INFO]    [COM8]Waitting for DA USB VCOM Port (COM10)
2018-12-28 00:10:19 [INFO]    [COM0]'s
2018-12-28 00:10:19 [DEBUG]   [COM8]Remove MTK USB Port (COM8) \\?\usb#vid_0e8d&pid_0003#5&2519928c&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
2018-12-28 00:10:20 [INFO]    [COM10]Change to DA USB VCOM Port (COM10)
2018-12-28 00:10:20 [ERROR]    FlashTool_ReadPartitionCount retrun  ERROR   ret = 5073
2018-12-28 00:10:20 [INFO]    [COM10]Download now...
2018-12-28 00:12:44 [ERROR]   [COM10]FlashTool_Download() failed code 1041 WLT.cpp 2071
2018-12-28 00:12:44 [DEBUG]   FlashTool_Disconnect begin
2018-12-28 00:12:59 [DEBUG]   FlashTool_Disconnect end return:0
2018-12-28 00:12:59 [ERROR]   _ERROR: S_CHKSUM_ERROR (Error code = 1041)
2018-12-28 00:12:59 [INFO]    [COM0]'s
2018-12-28 00:12:59 [DEBUG]   [COM10]Remove DA USB VCOM Port (COM10) \\?\usb#vid_0e8d&pid_2001#5&2519928c&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
2018-12-28 00:13:29 [INFO]    [COM0]'s
2018-12-28 00:13:29 [DEBUG]   [COM8]Remove MTK USB Port (COM8) \\?\usb#vid_0e8d&pid_0003#5&2519928c&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
2018-12-28 00:14:10 [INFO]    [COM0]'s
2018-12-28 00:14:10 [DEBUG]   [COM8]Remove MTK USB Port (COM8) \\?\usb#vid_0e8d&pid_0003#5&2519928c&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
2018-12-28 00:14:49 [INFO]    [COM0]'s
2018-12-28 00:14:49 [DEBUG]   [COM8]Remove MTK USB Port (COM8) \\?\usb#vid_0e8d&pid_0003#5&2519928c&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
2018-12-28 00:15:05 [INFO]    [COM0]'s
2018-12-28 00:15:05 [DEBUG]   [COM8]Remove MTK USB Port (COM8) \\?\usb#vid_0e8d&pid_0003#5&2519928c&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
2018-12-28 00:15:29 [INFO]    [COM0]'s
2018-12-28 00:15:29 [DEBUG]   [COM8]Remove MTK USB Port (COM8) \\?\usb#vid_0e8d&pid_0003#5&2519928c&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
2018-12-28 00:16:06 [INFO]    [COM0]'s
2018-12-28 00:16:06 [DEBUG]   [COM8]Remove MTK USB Port (COM8) \\?\usb#vid_0e8d&pid_0003#5&2519928c&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
2018-12-28 00:16:07 [INFO]    [COM0]'s
2018-12-28 00:16:07 [DEBUG]   [COM8]Remove MTK USB Port (COM8) \\?\usb#vid_0e8d&pid_0003#5&2519928c&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
2018-12-28 00:16:09 [INFO]    [COM0]'s
2018-12-28 00:16:09 [DEBUG]   [COM8]Remove MTK USB Port (COM8) \\?\usb#vid_0e8d&pid_0003#5&2519928c&0&4#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
This post was last modified: 28-12-2018, 09:51 AM by X3non.
X3non
X3non
X3non
Recognized Contributor
22,062
28-12-2018, 09:52 AM
#17
(27-12-2018, 05:25 PM)sixstails0075 log of wiselinktool
...
try using SP flash tool to flash the rom
BTW is the battery of the phone inbuilt? have you tried replacing the battery or charging it properly
sixstails0075
sixstails0075
sixstails0075
Respected Member
113
29-12-2018, 05:47 PM
#18
im flashing w/o battery, when im using sp flash tool its always a succes but nothing change to the phne, when use wiselink tool at the end of flashing an error occured chcksum error_1041 sir.
sixstails0075
sixstails0075
sixstails0075
Respected Member
113
29-12-2018, 06:19 PM
#19
sir chcksum error when i generate chcksum exe..Global File size: 262544 Buffer size: 262544.
lk.bin is Append to List.

SearchFile...: logo.bin
logo.bin is found;
logo.bin is Calc_Checksum
Global File size: 502031 Buffer size: 502032.
logo.bin is Append to List.

SearchFile...: boot.img
boot.img is found;
boot.img is Calc_Checksum
Global File size: 4847616
fu_checksum_by_package is : 0x0000a7d1
boot.img is Append to List.

SearchFile...: recovery.img


!!!!!!!!!!!!!!!!!!!!! ERROR !!!!!!!!!!!!!!!!!!!!!
!!! There are 2 files with filter: "recovery.img" !!!
!!!!!!!!!!!!!!!!!!!!! ERROR !!!!!!!!!!!!!!!!!!!!!
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
29-12-2018, 06:30 PM
#20



Let's see a screenshot of the contents of that firmware .
Pages (3): Previous 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram