Backup Mediatek ROM on a NAND device

[isrgish]

** EDITED **

I'm trying to backup the ROM on a NAND device. I was following the directions on this post [Tutorial] How to use Wwr_MTK + SP Flash tool to backup Mediatek rom. In step #4 it says to select your memory type and continues to go with the EMMC memory type. My device has NAND memory type. and when I select it it adds in another field that's in Russian. I think its asking for the block_size. What do I select here.

Also when I go back to SP Flash Tool and go to do a readback the what option do I select in Read Method.




I went ahead and tried with the default number which was 0x20000 and in SP Flash I left the defalt which was Read Page + Spare. Now when I went back to WwR MTK Toll and tried analyzing the preloader I get no results it says "Information Not Found..."

Some info from SP Flash Tool about my device.
Chip Info:
Chip Name - MT8167
Chip Version - 0x0000cb00
Ext Clock - EXT_26M
Extern RAM Type - DRAM
Extern RAM Size - 0x40000000
NAND Flash:
ID - 0x00000000
Size - 0x400000000
Page Size - 0x00004000
Spare Size - 0x00000080
Pages Per Block - 0x00000200
BMT Exist - false

Please help me with this.

Thank Youi,

[X3non]

** EDITED **

I'm trying to backup the ROM on a NAND device. I was following the directions on this post [url=https://forum.hovatek.com/thread-21970.html][Tutorial] How
...

from the image you sent, use the second option [i.e read page only] and try reading the length of page or the length of size
btw where / how did you get those info about the device you posted?

[isrgish]

from the image you sent, use the second option [i.e read page only] and try reading the length of page or the length of size
btw where / how did you get those info about the device you posted?

I got the info from SP Flash Tool on the left hand side this showed after I tried a readback.

I was able to do the readback but Wwr Tool wasn't able to find the Preloader in it.

I tried a few different sizes in the download as you suggestion but nothing seems to get the preloader. Then i tried 0x400000000 ( which is 16 GB this is shown in SP Flash as the size of the Extern RAM size) When I do this I get an error at readback.

Please help me with this.

Thank You,

[hovatek]

I got the info from SP Flash Tool on the left hand side this showed after I tried a readback.

I was able to do the readback but Wwr Tool wasn't able to find the Preloader in it.

I tried a few different sizes in the download as you suggestion but nothing seems to get the preloader. Then i tried 0x400000000 ( which is 16 GB this is shown in SP Flash as the size of the Extern RAM size) When I do this I get an error at readback.

Please help me with this.

Thank You,

What version of SP flash tool are you using?
Attach the scatter file you're using

[isrgish]

What version of SP flash tool are you using?
Attach the scatter file you're using

SP Flash version - 5.1844

The scatter file is attached below.

[hovatek]

SP Flash version - 5.1844

The scatter file is attached below.

OK. Before we delve deeper, how did you confirm your storage type is NAND and not EMMC?

[isrgish]

OK. Before we delve deeper, how did you confirm your storage type is NAND and not EMMC?

I first tried with EMMC but when I went to readback I got an error saying that the scatter file is for EMMC but the device is NAND.

This is the error message I got.

[X3non]

...

try reading only the first 0x100000 then upload the file then post the download link here (read page only as usual)

[isrgish]

try reading only the first 0x100000 then upload the file then post the download link here (read page only as usual)

Here is the file

[ Login / Register to download free]

[X3non]

Here is the file
...

truly there's no sign of preloader in this file
what error did you get when you tried reading back the length 0x400000000 ? (attach full screenshot)
you can also try 0x200000000