Hovatek Forum MOBILE Android [Please help] SP FLASHTOOL BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (2004) / FLASHING TECNO CAMON CM
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] SP FLASHTOOL BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (2004) / FLASHING TECNO CAMON CM

[Please help] SP FLASHTOOL BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (2004) / FLASHING TECNO CAMON CM

Charisma007
Charisma007
Charisma007
Junior Member
15
30-12-2018, 09:50 PM
#1



I downloaded tecno camon cm firmware here earlier today but sp flashtool keeps govin error messag when ever i try to flash the firmware


SP Flash Tool report:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (2004) [H/W] Fail to download DA to baseband chip's internal SRAM [HINT]: 1. There's an cable communication problem between FlashTool and BootROM.
2. Target might be shutdown unexpectedly or target lost power supply. [ACTION]
1. Try again.
2. Proceed H/W checking in download cable and target side com port.
3. Monitor if power-drop occured in target side.
This post was last modified: 30-12-2018, 09:51 PM by Charisma007.
xerxes
xerxes
xerxes
Senior Member
8,355
31-12-2018, 09:00 AM
#2
(30-12-2018, 09:50 PM)Charisma007 I downloaded tecno camon cm firmware here earlier today but sp flashtool keeps govin error messag when ever i try to flash the firmware


SP Flash Tool report:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (2004) [H/W] Fail to download DA to baseband chip's internal SRAM [HINT]: 1. There's an cable communication problem between FlashTool and BootROM.
2. Target might be shutdown unexpectedly or target lost power supply. [ACTION]
1. Try again.
2. Proceed H/W checking in download cable and target side com port.
3. Monitor if power-drop occured in target side.

The phone requires a Download Agent, download @ https://www.hovatek.com/forum/thread-23243.html
Also, it would help to know what's wrong with the phone.

Sent from my M5 mini using Hovatek Mobile
Charisma007
Charisma007
Charisma007
Junior Member
15
31-12-2018, 04:55 PM
#3
(31-12-2018, 09:00 AM)innagee
(30-12-2018, 09:50 PM)Charisma007 I downloaded tecno camon cm firmware here earlier today but sp flashtool keeps govin error messag when ever i try to flash the firmware


SP Flash Tool report:
BROM ERROR : S_BROM_DOWNLOAD_DA_FAIL (2004) [H/W] Fail to download DA to baseband chip's internal SRAM [HINT]: 1. There's an cable communication problem between FlashTool and BootROM.
2. Target might be shutdown unexpectedly or target lost power supply. [ACTION]
1. Try again.
2. Proceed H/W checking in download cable and target side com port.
3. Monitor if power-drop occured in target side.

The phone requires a Download Agent, download @ https://www.hovatek.com/forum/thread-23243.html
Also, it would help to know what's wrong with the phone.

Sent from my M5 mini using Hovatek Mobile

i used download agent and it flashed the phone but the phone wont boot up anymore
hovatek
hovatek
hovatek
Administrator
49,570
31-12-2018, 05:41 PM
#4
(31-12-2018, 04:55 PM)Charisma007 i used download agent and it flashed the phone but the phone wont boot up anymore

Leave the phone to charge a while then try powering on.
What was your phone's build number before flashing and which firmware (build number) did you flash?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Charisma007
Charisma007
Charisma007
Junior Member
15
01-01-2019, 06:05 AM
#5



(31-12-2018, 05:41 PM)hovatek
(31-12-2018, 04:55 PM)Charisma007 i used download agent and it flashed the phone but the phone wont boot up anymore

Leave the phone to charge a while then try powering on.
What was your phone's build number before flashing and which firmware (build number) did you flash?

honestly i don't know the build number , the phone was soft bricked before i flashed it,went into recovery but there was no build number, just the SOC version. so i decided to flash  this build CA6-H3721B-N-180117V34
X3non
X3non
X3non
Recognized Contributor
22,062
01-01-2019, 01:46 PM
#6
(01-01-2019, 06:05 AM)Charisma007 honestly i don't know the build number , the phone was soft bricked before i flashed it,went into recovery but there was no build number, just the SOC version. so i decided to flash  this build CA6-H3721B-N-180117V34

try disconnecting / reconnecting the battery and lets know if the device still remains dead
Charisma007
Charisma007
Charisma007
Junior Member
15
02-01-2019, 02:17 PM
#7
(01-01-2019, 01:46 PM)X3non
(01-01-2019, 06:05 AM)Charisma007 honestly i don't know the build number , the phone was soft bricked before i flashed it,went into recovery but there was no build number, just the SOC version. so i decided to flash  this build CA6-H3721B-N-180117V34

try disconnecting / reconnecting the battery and lets know if the device still remains dead
its an inbuilt battery please
hovatek
hovatek
hovatek
Administrator
49,570
02-01-2019, 05:24 PM
#8
(02-01-2019, 02:17 PM)Charisma007 its an inbuilt battery please

you'll need to have the battery taken out and reconnected else keep charging or try another firmware

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram