[vRaj]

I have tried many time to search nougat flash file for iball slide snap 4g2 and I didn't get, but in service center I have got nougat update and I didn't get any nougat firmware on any website please help. Thanks

[X3non]

I have tried many time to search nougat flash file for iball slide snap 4g2 and I didn't get, but in service center I have got nougat update and I didn't get any nougat firmware on any website please help. Thanks

what's the chipset of the phone? use the app at https://forum.hovatek.com/thread-13054.html to verify the chipset
are you trying to officially update your phone OR are you looking for a custom rom?

[vRaj]

Chipset of the Tablet is Mt8735m according to Droid info app, but according to downloaded marshmallows firmware of my Tablet the chipset is MT6735M.
I'm looking for custom and official both rom, but few days ago I had search for firmware and I found only lollipop and marshmallows zip file but when I visit my Tablet website I saw there is showing tablet is with nougat than I visited service center and I got nougat update.
Now I don't wanna go again in service center that's why I have tried to take a nougat rom backup using wwr and sp flash tool but before backup I have format my Tablet but it's annoying to see backup is of 14.4gb and when I tried to flash boot.img for test to confirm it's working or not then I got a pop up message "invalid bbchip type (1003).
Please help me to root my device after taking working rom backup and scatter file, and I also want to custom recovery for my Tablet" iball_slide_snap 4g2.

Thanks in advance

[hovatek]

Chipset of the Tablet is Mt8735m according to Droid info app, but according to downloaded marshmallows firmware of my Tablet the chipset is MT6735M.
I'm looking for custom and official both rom, but few days ago I had search for firmware and I found only lollipop and marshmallows zip file but when I visit my Tablet website I saw there is showing tablet is with nougat than I visited service center and I got nougat update.
Now I don't wanna go again in service center that's why I have tried to take a nougat rom backup using wwr and sp flash tool but before backup I have format my Tablet but it's annoying to see backup is of 14.4gb and when I tried to flash boot.img for test to confirm it's working or not then I got a pop up message "invalid bbchip type (1003).
Please help me to root my device after taking working rom backup and scatter file, and I also want to custom recovery for my Tablet" iball_slide_snap 4g2.

Thanks in advance

Use Miracle box @ https://forum.hovatek.com/thread-13347.html
backup in scatter format
let me know when done

[vRaj]

According to your suggestion I do a Rom backup in scatter format and it worked but another problems are coming.

When I'm going to test Rom backup using sp flash tool. By flashing boot.bin and again try after renaming boot.bin to boot.img and edit the scatter file the again same error found
1st error is "S_INVALID_BBCHIP_TYPE" (this error already come when I used to flash rom backup which is created by wwr and sp flash tool "readback")
2nd error is "S_TIMEOUT
Then I am going to flash complete Rom backup using sp flash tool but it's showing another error. “boundary check failed:rom_end_addr.
ROM(PRELOADER)(0x0000000000001e28b)!
Next ROM:m_begin_addr(0x00000000000000)“

Now I aging I'm going to take a backup in "bin" format using miracle box then again error comes and it didn't backup in "bin" format.
Error :
“1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM (Android) (COM6)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6735 SW:0000 Ver: CB00
Downloading Boot8 ...
EMMC Size: 0x0386000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
File Mode: D:\android firmware\DRIVE\miracle 2.27A\MTK6735_1901080623.bin
Reading(EMMC)...(0x384F80000)
USB ERROR."

And I have tried everything 3 times


Please help me to fix these error. Thanks

[innagee]

According to your suggestion I do a Rom backup in scatter format and it worked but another problems are coming.

When I'm going to test Rom backup using sp flash tool. By flashing boot.bin and again try after renaming boot.bin to boot.img and edit the scatter file the again same error found
1st error is "S_INVALID_BBCHIP_TYPE" (this error already come when I used to flash rom backup which is created by wwr and sp flash tool "readback")
2nd error is "S_TIMEOUT
Then I am going to flash complete Rom backup using sp flash tool but it's showing another error. “boundary check failed:rom_end_addr.
ROM(PRELOADER)(0x0000000000001e28b)!
Next ROM:m_begin_addr(0x00000000000000)“

Now I aging I'm going to take a backup in "bin" format using miracle box then again error comes and it didn't backup in "bin" format.
Error :
“1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set MediaTek PreLoader USB VCOM (Android) (COM6)
Please Hold "ON" to connect with the phone...
Connected to Phone.
CPU: MT6735 SW:0000 Ver: CB00
Downloading Boot8 ...
EMMC Size: 0x0386000000
Flash Type: EMMC
INT/EXT RAM Size: 0x0+0x0
File Mode: D:\android firmware\DRIVE\miracle 2.27A\MTK6735_1901080623.bin
Reading(EMMC)...(0x384F80000)
USB ERROR."

And I have tried everything 3 times


Please help me to fix these error. Thanks

Miracle backup can only be flashed using miracle box, you can flash by renaming boot.img to boot.bin then copy the image into a folder together with preloader.bin you got from the miracle box backup.
See https://forum.hovatek.com/thread-14106.html

Sent from my M5 mini using Hovatek Mobile

[vRaj]

Wow it worked, miracle box is working. Now I have a nougat rom backup of my device and I also root my device using magisk patched boot.img by flashing with miracle box. Thanks you so much

[vRaj]

Now I want to create custom rom and custom recovery please help and guide me in creating custom rom and custom recovery. Thanks you

[innagee]

Now I want to create custom rom and custom recovery please help and guide me in creating custom rom and custom recovery. Thanks you

port TWRP Custom Recovery using the tool @ https://forum.hovatek.com/thread-21839.html or Philz Recovery @ https://forum.hovatek.com/thread-21495.html
For custom ROM you'll need to search online, we don't collect links to custom ROM.

[vRaj]

Touch is not working in Twrp recovery and philz but philz work with buttons thanks for the help