Hovatek Forum MOBILE Android Micromax bharath 5 dead recovery after flashing with wrong firmware
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Micromax bharath 5 dead recovery after flashing with wrong firmware

Micromax bharath 5 dead recovery after flashing with wrong firmware

Mallikarjuna
Mallikarjuna
Mallikarjuna
Enthusiastic Member
6
12-01-2019, 05:32 PM
#1



I have micromax bharath 5.i unfortunately flash with with micromax bharath 5 plus Firmware. After it is in dead condition. It won't recover even after flashing. Sp flash tool throws enable dram fail error. It won't recover even after flash using qgdp tool. Please provide mt6737 scatter file for further recovery device from dead condition. Please provide fastly..
xerxes
xerxes
xerxes
Senior Member
8,355
12-01-2019, 10:18 PM
#2
(12-01-2019, 05:32 PM)Mallikarjuna I have micromax bharath 5.i unfortunately flash with with micromax bharath 5 plus Firmware. After it is in dead condition. It won't recover even after flashing. Sp flash tool throws enable dram fail error. It won't recover even after flash using qgdp tool. Please provide mt6737 scatter file for further recovery device from dead condition. Please provide fastly..

Did you take note of the phone's build no before flashing it?


Sent from my M5 mini using Hovatek Mobile
Mallikarjuna
Mallikarjuna
Mallikarjuna
Enthusiastic Member
6
13-01-2019, 03:04 AM
#3
No sir its h/w ver 2.0 s/w ver 6.0
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
13-01-2019, 07:40 AM
#4
Considering, you did not take note of your original build number, you have to proceed by trial and error.
Have you tried this firmware? http://www.mediafire.com/file/686m31dbgj....0_CPB.zip
Mallikarjuna
Mallikarjuna
Mallikarjuna
Enthusiastic Member
6
13-01-2019, 03:53 PM
#5



I already traid with all of the firmware available flas able with ygdp tool. When flashing with ygdp it throws error cpb download not complete. So only there is one way to recovery, flash with SP flash tool. I am searching for Firmware flasable with SP flash tool. Please provide scatter file and Firmware for Micromax bharath 5
EMMANUS
EMMANUS
EMMANUS
Senior Member
1,677
13-01-2019, 08:16 PM
#6
Use this guideĀ https://www.hovatek.com/forum/thread-26403.html to get scatter file from .cpb , then flash with SP flash tool
This post was last modified: 13-01-2019, 08:18 PM by EMMANUS.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram