Hovatek Forum MOBILE Android [Please help] I am facing IMEI and Wi-Fi problem Infinix x623 hot 6x
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


[Please help] I am facing IMEI and Wi-Fi problem Infinix x623 hot 6x

[Please help] I am facing IMEI and Wi-Fi problem Infinix x623 hot 6x

Agad123
Agad123
Agad123
Enthusiastic Member
6
13-02-2019, 11:19 AM
#1



After I flashed a x623 I am facing the following error:
IMEI1 showing just "0" IMEI2 showing just "00", Wifi not turning on, but baseband is valid. 

Thanks Guys
xerxes
xerxes
xerxes
Senior Member
8,355
13-02-2019, 01:37 PM
#2
(13-02-2019, 11:19 AM)Agad123 After I flashed a x623 I am facing the following error:
IMEI1 showing just "0" IMEI2 showing just "00", Wifi not turning on, but baseband is valid. 

Thanks Guys

Have you tried factory resetting the phone after flashing?

Sent from my M5 mini using Hovatek Mobile
freshtyt
freshtyt
freshtyt
Senior Member
2,949
13-02-2019, 08:05 PM
#3
(13-02-2019, 11:19 AM)Agad123 After I flashed a x623 I am facing the following error:
IMEI1 showing just "0" IMEI2 showing just "00", Wifi not turning on, but baseband is valid. 

Thanks Guys

if factory reset doesn't fix it, you might need to backup efs from a working X623 phone without the wifi issue then restore onto your phone
but try this tool @ https://mega.nz/#!H9VmVCTJ!YXtmTBq5sW_GF...ZHEMjrPTkI

boot your phone to diag mode using the USSD code in important notice section @ https://www.hovatek.com/forum/thread-22399.html
the phone should be detected as "diag" in device manager
launch the qmsl tool and write IMEI 1 & 2, WIFI addresses
reboot the phone if it writes successfully
Agad123
Agad123
Agad123
Enthusiastic Member
6
14-02-2019, 06:29 AM
#4
Thanks am going to try
peter osoro
peter osoro
peter osoro
Senior Member
260
16-03-2019, 02:26 PM
#5



(13-02-2019, 11:19 AM)Agad123 After I flashed a x623 I am facing the following error:
IMEI1 showing just "0" IMEI2 showing just "00", Wifi not turning on, but baseband is valid. 

Thanks Guys

Which tool and firmware did you use?
hovatek
hovatek
hovatek
Administrator
49,570
30-05-2019, 07:23 PM
#6
(13-02-2019, 11:19 AM)Agad123 After I flashed a x623 I am facing the following error:
IMEI1 showing just "0" IMEI2 showing just "00", Wifi not turning on, but baseband is valid. 

Thanks Guys

Flash the QCN @ https://www.hovatek.com/forum/thread-19499.html

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
samirox
samirox
samirox
Newbie
1
03-08-2019, 06:01 PM
#7
first try to erase phone with nck or umt next flash rom whit HQXA_Transsion_CustomerDL_EMMC_V1.19 after u have all menu icon next repaire imei or restor qcn whit QcFire.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram