[Please help] Help regarding unlocking bootloader of itel a13 plus SC7731 Android 7.0
[Please help] Help regarding unlocking bootloader of itel a13 plus SC7731 Android 7.0
(26-02-2019, 05:05 AM)Rodriguez Ryan I have attached 3 pictures.
1st one is the method u told me about.
I checked if my BL is unlocked using 'fastboot getvar unlock'
As you can see the response.It showed nothing.So I guess its still locked?(Because I can't flash anything from fastboot using adb)
2nd and 3rd picture was taken while trying to flash patched_boot.img(I used magisk and patched my boot.img)
using SPD tools and it gave me that error.
I guess SPD Tools can't flash img files right?
Thanks in advance
I appreciate your reply sir ☺
(26-02-2019, 11:19 AM)X3non [quote='Rodriguez Ryan' pid='161878' dateline='1551153913']
you need to try a different version of SPD tool to fix that bin packet
try a different version of research download tool @ https://www.hovatek.com/forum/thread-15611.html
you can try research download latest version or version R2.9.9005
(26-02-2019, 11:19 AM)X3non [quote='Rodriguez Ryan' pid='161878' dateline='1551153913']
you need to try a different version of SPD tool to fix that bin packet
try a different version of research download tool @ https://www.hovatek.com/forum/thread-15611.html
you can try research download latest version or version R2.9.9005
(26-02-2019, 02:45 PM)Rodriguez Ryan So u mean I can flash patched_boot image using latest RDT?read the reply again properly
I already tried it.
Same result,same thing shows like the SS I've shared a while ago.
It seems like only way to flash an img file is through command on fastboot.
Can I try some other method for unlocking bootloader?
(26-02-2019, 04:49 PM)X3non(26-02-2019, 02:45 PM)Rodriguez Ryan So u mean I can flash patched_boot image using latest RDT?read the reply again properly
I already tried it.
Same result,same thing shows like the SS I've shared a while ago.
It seems like only way to flash an img file is through command on fastboot.
Can I try some other method for unlocking bootloader?
i didn't just mention latest version, try the versions until you find one that loads without the bin packet error
(27-02-2019, 05:08 AM)Rodriguez Ryan ...
But when I try anything in pac format it just works fine.
What to do?
(27-02-2019, 10:53 AM)X3nonNow I get it.(27-02-2019, 05:08 AM)Rodriguez Ryan ...
But when I try anything in pac format it just works fine.
What to do?
well, now you're explaining properly, you can only select PAC file and not .img file
launch the tool > select the PAC file > wait for it to load > click the second icon in spd tool (i.e settings) > untick everything except fdl1&2 and recovery > change the file location of recovery to point at recovery.img (twrp) > then flash
you must use research download tool
(27-02-2019, 01:21 PM)Rodriguez Ryan ...
So why aren't flashing starting?
And yes I tried all the tools.Same with everyone.
(27-02-2019, 01:21 PM)Rodriguez Ryan(27-02-2019, 10:53 AM)X3nonNow I get it.(27-02-2019, 05:08 AM)Rodriguez Ryan ...
But when I try anything in pac format it just works fine.
What to do?
well, now you're explaining properly, you can only select PAC file and not .img file
launch the tool > select the PAC file > wait for it to load > click the second icon in spd tool (i.e settings) > untick everything except fdl1&2 and recovery > change the file location of recovery to point at recovery.img (twrp) > then flash
you must use research download tool
It seems like flash method isn't working on my phone.
I have all the drivers installed or adb wouldn't recognize my phone right?
1)Switched off my phone
2)Took the battery out
3)Loaded the pac/whole rom
But there's no option to mark/unmark anything.
I have attached a picture for it.
4)I went on flashing anyway(I'm just checking if flashing method working)
5)I clicked download on RSD
6)I put the battery inside
7)Pressed vol down
8)Plugged the cable
By now RSD should have recognized my phone and start flashing right?
But nothings happening?
Can u guess what is causing that issue?
I have the drivers installed for sure.I even hear the sound that laptop makes while plugging and un-plugging the data cable.
So why aren't flashing starting?
And yes I tried all the tools.Same with everyone.