Hovatek Forum MOBILE Android [Please help] How To Unlock Bootloader SC9850KL Oreo 8.1.0 Go Edition
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] How To Unlock Bootloader SC9850KL Oreo 8.1.0 Go Edition

[Please help] How To Unlock Bootloader SC9850KL Oreo 8.1.0 Go Edition

Pages (2): Previous 1 2
X3non
X3non
X3non
Recognized Contributor
22,062
04-04-2019, 06:48 PM
#11



(04-04-2019, 01:22 PM)Rahmatyus14 I got this

Code:

ANDROID!
bad boot image header, give up boot!!!!
kernel image should not be zero!
ramdisk image size should not be zero
os version should not be zero!
config_os_version failed
read dt image table header fail
Cannot validate Device Tree Table
malloc size %d for dt header fail
read dt image table and entries header fail
Getting device tree address failed
dt entry size read error!
dtbo
read dtbo fail
malloc size %d for dtbo fail
%s kernel read error!
load dt error!
%s ramdisk read error!
%s, sprdisk mode failure!
Fatal Error,get_dev mmc failed!
verify get partition %s info failed!
WARNNING: LOCK FLAG IS : UNLOCK, SKIP VERIFY!!!
pass_chip_uid_to_tos()... sizeof(blocks)=%d
blks:0x%08x 0x%08x, result: 0x%x
lcd start init time:%dms
logo
uboot consume time:%dms, lcd init consume:%dms, backlight on time:%dms
pm_sys
cali
autotest
special
apwdgreboot
unknowreboot
   INFO: LOCK FLAG IS : UNLOCK!!!
charger
engtest
alarm
factorytest
fdt_chosen_bootargs_append: %s
fdt_chosen_bootargs_append: cann't find chosen
bootargs len:%d overflow (MAX_BOOTARG_LEN-1)
bootargs len:%d overflow MAX_BOOTARG_LEN
androidboot.verifiedbootstate=green
androidboot.verifiedbootstate=yellow
androidboot.verifiedbootstate=orange
androidboot.verifiedbootstate=red
androidboot.flash.locked=0
androidboot.flash.locked=1
sprd,decoup
cproc-use-decoup
cproc-use-decoup-v1
/reserved-memory
fdt_reserved_mem_multimedia_parse: cann't find mm_reserved
multimediabuffer
tos-mem
audio-mem
overlaybuffer
fdt_chosen_bootargs_replace: %s
fdt_chosen_bootargs_replace: cann't find chosen
fdt_chosen_bootargs_replace: cann't find str %s!
regulator-name
vddarm0
vddarm0 not found
vddarm1
device_type
cannot find bullhill cpu
cpu0-supply
dual-phase-supply
cpu1-supply
pmic2731_wa
sprd,iq-mem
compatible
del iq reserved mem failed
cann't find reserved-memory node
cp-modem
cann't find cp-modem@xxxx node
sprd,cpdbg-size
cannot find reg prop in cp-modem@xxxx node
modem=shutdown
console=ttyS1
console=null
lcd_id=ID
lcd_base=
lcd_size=
%dx%d
 androidboot.serialno=%s
kmemleak=on
 sysdump_magic=%lx
sysdump-uboot
ERROR: cannot set sysdump-uboot node's reg property(addr)!
ERROR: cannot set sysdump-uboot node's reg property(size)!
 adc_cal=%d,%d
 fgu_cal=%d,%d,%d
 mem_cs=%d, mem_cs0_sz=%08x
failed to append ddr training data args bootargs
failed to reserved cs0 ddr training data space
failed to reserved cs1 ddr training data space
ERROR: device tree must have /memory node %s.
ERROR: cannot set /memory node's reg property(addr)!
ERROR: cannot set /memory node's reg property(size)!
bootargs is null
pathcopy string copy failed!
loglevel
read miscdata loglevel data error.
enable
loglevel=7
set logleve = 7 failed!
uart calibrate detecting
usb calibrate configuration timeout
caliberate : what got from host total %d is
0x%x
func: %s line: %d caliberate failed
autotest=1
calibration=%d,%d,130
checked command from pc , and return value = %x
USB SERIAL CONFIGED
func: %s line %d usb trans with error %d
func: %s readly read %d
return ret %d
usb_driver_init error
usb_serial_init error
usb calibrate configuration timeout,%lu,%lu,%lu
usb calibrate port open timeout%lu,%lu,%lu
USB SERIAL PORT OPENED
usb read timeout
caliberate:what got from host total %d is
preparing reply buf
in function prepare_reply_buf, buf = NULL
in function prepare_reply_buf: Buffer malloc failed
%s caliberate_mode: %x
write efuse failed and error code = %d
calibration=%d,%d,146
/adc.bin
read miscdata adc data error.
%s: cannot read prodnv /adb.bin.
heap@4
set fastboot buffer error
%s%s
FAIL
OKAY
Flashing Lock Flag is locked. Please unlock it first!
 ret is %04x
lcs is %d
data too large
DATA%08x
SOCID
socid is:
subcmd is null.
get_identifier_token
Identifier token:
unknown cmd.
 get backup partition name fail
Write nv img fail
write %s size 0x%llx fail
image write with backup error!
image write error!
bad boot image header
kernel image should not be zero
ramdisk size error
unlock
Not implemet.
Not implement.
unlock_critical
get_unlock_ability
get_unlock_bootloader_nonce
Bootloader can not been locked repeatly.
Lock bootloader fail.
   Info:Lock bootloader success!
Lock bootloader successfully!
unlock_bootloader
Bootloader can not been unlocked repeatly.
Please firstly execute <fastboot oem get_identifier_token>
Unlock bootloader fail.
   Warning: Unlock device may erase user data.
   Press volume down button to confirm that.
   Press volume up button to cancel.
   Info:user cancelled!
Info:user cancel unlock bootloader!
Erase userdata fail.
   Info:Unlock bootloader success!
Info:Unlock bootloader success!
   Begin to erase user data...
------------------------------------------------------------------------
   Warning:RMA will change hardware status and unrecoverable, also will make some secure data unaccessible!
   Do you confirm that you are developer and need this operation really?
   Press button 'Volumn-Down' for 'No'.
   Press button 'Volumn-Up' for 'Yes'.
   The operation will be cancelled automatically after 20 seconds.
------------------------------------------------------------------------
user cancelled
time out
   fastboot mode
getvar:
download:
1.0
flash:
erase:
powerdown
continue
reboot-bootloader
flashing
oem
getlcs
setrma
getsocid
unknown reason
unknown command
misc
partition <misc> read error, can not get recovery message
write partition <misc> fail
boot-recovery
update-radio
/alarm_flag
/poweron_timeinmillis
USB SERIAL CONFIGED failed
Waiting For USB SERIAL PORT OPEN ... ...
%s vbat_vol:%d,comp_vbat:%d
Pressed key: %d
...

you didn't tell where you got all this info from
Rahmatyus14
Rahmatyus14
Rahmatyus14
Enthusiastic Member
8
05-04-2019, 12:44 AM
#12
(04-04-2019, 06:47 PM)X3non
(04-04-2019, 01:46 PM)Rahmatyus14 This command:
fastboot flashing unlock
Give me a result : not implement
Because I need to do a spesific command first, right?
The phone seems to unlockable, right?
The only problem is that the manufacturer of this device isn't tell anything or even guide me the proper method to UBL this device. Everytime I contacted them, they keeps asking me "do you wanted to unlock the bootloader of you device?". But when I answered "yes", they never reply again.

did you enabled oem-unlock in settings before trying the command?
also you should note not all OEMs provide support for unlocking their devices, infact most don't

Yes, I already enabled it.
Android is an open source OS. Why wouldnt they allow us to unlock their devices? Such a dumm thing  Dodgy
Rahmatyus14
Rahmatyus14
Rahmatyus14
Enthusiastic Member
8
05-04-2019, 12:48 AM
#13
(04-04-2019, 06:48 PM)X3non
(04-04-2019, 01:22 PM)Rahmatyus14 I got this

Code:

ANDROID!
bad boot image header, give up boot!!!!
kernel image should not be zero!
ramdisk image size should not be zero
os version should not be zero!
config_os_version failed
read dt image table header fail
Cannot validate Device Tree Table
malloc size %d for dt header fail
read dt image table and entries header fail
Getting device tree address failed
dt entry size read error!
dtbo
read dtbo fail
malloc size %d for dtbo fail
%s kernel read error!
load dt error!
%s ramdisk read error!
%s, sprdisk mode failure!
Fatal Error,get_dev mmc failed!
verify get partition %s info failed!
WARNNING: LOCK FLAG IS : UNLOCK, SKIP VERIFY!!!
pass_chip_uid_to_tos()... sizeof(blocks)=%d
blks:0x%08x 0x%08x, result: 0x%x
lcd start init time:%dms
logo
uboot consume time:%dms, lcd init consume:%dms, backlight on time:%dms
pm_sys
cali
autotest
special
apwdgreboot
unknowreboot
   INFO: LOCK FLAG IS : UNLOCK!!!
charger
engtest
alarm
factorytest
fdt_chosen_bootargs_append: %s
fdt_chosen_bootargs_append: cann't find chosen
bootargs len:%d overflow (MAX_BOOTARG_LEN-1)
bootargs len:%d overflow MAX_BOOTARG_LEN
androidboot.verifiedbootstate=green
androidboot.verifiedbootstate=yellow
androidboot.verifiedbootstate=orange
androidboot.verifiedbootstate=red
androidboot.flash.locked=0
androidboot.flash.locked=1
sprd,decoup
cproc-use-decoup
cproc-use-decoup-v1
/reserved-memory
fdt_reserved_mem_multimedia_parse: cann't find mm_reserved
multimediabuffer
tos-mem
audio-mem
overlaybuffer
fdt_chosen_bootargs_replace: %s
fdt_chosen_bootargs_replace: cann't find chosen
fdt_chosen_bootargs_replace: cann't find str %s!
regulator-name
vddarm0
vddarm0 not found
vddarm1
device_type
cannot find bullhill cpu
cpu0-supply
dual-phase-supply
cpu1-supply
pmic2731_wa
sprd,iq-mem
compatible
del iq reserved mem failed
cann't find reserved-memory node
cp-modem
cann't find cp-modem@xxxx node
sprd,cpdbg-size
cannot find reg prop in cp-modem@xxxx node
modem=shutdown
console=ttyS1
console=null
lcd_id=ID
lcd_base=
lcd_size=
%dx%d
 androidboot.serialno=%s
kmemleak=on
 sysdump_magic=%lx
sysdump-uboot
ERROR: cannot set sysdump-uboot node's reg property(addr)!
ERROR: cannot set sysdump-uboot node's reg property(size)!
 adc_cal=%d,%d
 fgu_cal=%d,%d,%d
 mem_cs=%d, mem_cs0_sz=%08x
failed to append ddr training data args bootargs
failed to reserved cs0 ddr training data space
failed to reserved cs1 ddr training data space
ERROR: device tree must have /memory node %s.
ERROR: cannot set /memory node's reg property(addr)!
ERROR: cannot set /memory node's reg property(size)!
bootargs is null
pathcopy string copy failed!
loglevel
read miscdata loglevel data error.
enable
loglevel=7
set logleve = 7 failed!
uart calibrate detecting
usb calibrate configuration timeout
caliberate : what got from host total %d is
0x%x
func: %s line: %d caliberate failed
autotest=1
calibration=%d,%d,130
checked command from pc , and return value = %x
USB SERIAL CONFIGED
func: %s line %d usb trans with error %d
func: %s readly read %d
return ret %d
usb_driver_init error
usb_serial_init error
usb calibrate configuration timeout,%lu,%lu,%lu
usb calibrate port open timeout%lu,%lu,%lu
USB SERIAL PORT OPENED
usb read timeout
caliberate:what got from host total %d is
preparing reply buf
in function prepare_reply_buf, buf = NULL
in function prepare_reply_buf: Buffer malloc failed
%s caliberate_mode: %x
write efuse failed and error code = %d
calibration=%d,%d,146
/adc.bin
read miscdata adc data error.
%s: cannot read prodnv /adb.bin.
heap@4
set fastboot buffer error
%s%s
FAIL
OKAY
Flashing Lock Flag is locked. Please unlock it first!
 ret is %04x
lcs is %d
data too large
DATA%08x
SOCID
socid is:
subcmd is null.
get_identifier_token
Identifier token:
unknown cmd.
 get backup partition name fail
Write nv img fail
write %s size 0x%llx fail
image write with backup error!
image write error!
bad boot image header
kernel image should not be zero
ramdisk size error
unlock
Not implemet.
Not implement.
unlock_critical
get_unlock_ability
get_unlock_bootloader_nonce
Bootloader can not been locked repeatly.
Lock bootloader fail.
   Info:Lock bootloader success!
Lock bootloader successfully!
unlock_bootloader
Bootloader can not been unlocked repeatly.
Please firstly execute <fastboot oem get_identifier_token>
Unlock bootloader fail.
   Warning: Unlock device may erase user data.
   Press volume down button to confirm that.
   Press volume up button to cancel.
   Info:user cancelled!
Info:user cancel unlock bootloader!
Erase userdata fail.
   Info:Unlock bootloader success!
Info:Unlock bootloader success!
   Begin to erase user data...
------------------------------------------------------------------------
   Warning:RMA will change hardware status and unrecoverable, also will make some secure data unaccessible!
   Do you confirm that you are developer and need this operation really?
   Press button 'Volumn-Down' for 'No'.
   Press button 'Volumn-Up' for 'Yes'.
   The operation will be cancelled automatically after 20 seconds.
------------------------------------------------------------------------
user cancelled
time out
   fastboot mode
getvar:
download:
1.0
flash:
erase:
powerdown
continue
reboot-bootloader
flashing
oem
getlcs
setrma
getsocid
unknown reason
unknown command
misc
partition <misc> read error, can not get recovery message
write partition <misc> fail
boot-recovery
update-radio
/alarm_flag
/poweron_timeinmillis
USB SERIAL CONFIGED failed
Waiting For USB SERIAL PORT OPEN ... ...
%s vbat_vol:%d,comp_vbat:%d
Pressed key: %d
...

you didn't tell where you got all this info from

This is from uboot.bin after I changed the extension and find the strings on it
shankar1790
shankar1790
shankar1790
Senior Member
474
05-04-2019, 03:11 AM
#14
(05-04-2019, 12:48 AM)Rahmatyus14
(04-04-2019, 06:48 PM)X3non
(04-04-2019, 01:22 PM)Rahmatyus14 I got this

Code:

ANDROID!
bad boot image header, give up boot!!!!
kernel image should not be zero!
ramdisk image size should not be zero
os version should not be zero!
config_os_version failed
read dt image table header fail
Cannot validate Device Tree Table
malloc size %d for dt header fail
read dt image table and entries header fail
Getting device tree address failed
dt entry size read error!
dtbo
read dtbo fail
malloc size %d for dtbo fail
%s kernel read error!
load dt error!
%s ramdisk read error!
%s, sprdisk mode failure!
Fatal Error,get_dev mmc failed!
verify get partition %s info failed!
WARNNING: LOCK FLAG IS : UNLOCK, SKIP VERIFY!!!
pass_chip_uid_to_tos()... sizeof(blocks)=%d
blks:0x%08x 0x%08x, result: 0x%x
lcd start init time:%dms
logo
uboot consume time:%dms, lcd init consume:%dms, backlight on time:%dms
pm_sys
cali
autotest
special
apwdgreboot
unknowreboot
   INFO: LOCK FLAG IS : UNLOCK!!!
charger
engtest
alarm
factorytest
fdt_chosen_bootargs_append: %s
fdt_chosen_bootargs_append: cann't find chosen
bootargs len:%d overflow (MAX_BOOTARG_LEN-1)
bootargs len:%d overflow MAX_BOOTARG_LEN
androidboot.verifiedbootstate=green
androidboot.verifiedbootstate=yellow
androidboot.verifiedbootstate=orange
androidboot.verifiedbootstate=red
androidboot.flash.locked=0
androidboot.flash.locked=1
sprd,decoup
cproc-use-decoup
cproc-use-decoup-v1
/reserved-memory
fdt_reserved_mem_multimedia_parse: cann't find mm_reserved
multimediabuffer
tos-mem
audio-mem
overlaybuffer
fdt_chosen_bootargs_replace: %s
fdt_chosen_bootargs_replace: cann't find chosen
fdt_chosen_bootargs_replace: cann't find str %s!
regulator-name
vddarm0
vddarm0 not found
vddarm1
device_type
cannot find bullhill cpu
cpu0-supply
dual-phase-supply
cpu1-supply
pmic2731_wa
sprd,iq-mem
compatible
del iq reserved mem failed
cann't find reserved-memory node
cp-modem
cann't find cp-modem@xxxx node
sprd,cpdbg-size
cannot find reg prop in cp-modem@xxxx node
modem=shutdown
console=ttyS1
console=null
lcd_id=ID
lcd_base=
lcd_size=
%dx%d
 androidboot.serialno=%s
kmemleak=on
 sysdump_magic=%lx
sysdump-uboot
ERROR: cannot set sysdump-uboot node's reg property(addr)!
ERROR: cannot set sysdump-uboot node's reg property(size)!
 adc_cal=%d,%d
 fgu_cal=%d,%d,%d
 mem_cs=%d, mem_cs0_sz=%08x
failed to append ddr training data args bootargs
failed to reserved cs0 ddr training data space
failed to reserved cs1 ddr training data space
ERROR: device tree must have /memory node %s.
ERROR: cannot set /memory node's reg property(addr)!
ERROR: cannot set /memory node's reg property(size)!
bootargs is null
pathcopy string copy failed!
loglevel
read miscdata loglevel data error.
enable
loglevel=7
set logleve = 7 failed!
uart calibrate detecting
usb calibrate configuration timeout
caliberate : what got from host total %d is
0x%x
func: %s line: %d caliberate failed
autotest=1
calibration=%d,%d,130
checked command from pc , and return value = %x
USB SERIAL CONFIGED
func: %s line %d usb trans with error %d
func: %s readly read %d
return ret %d
usb_driver_init error
usb_serial_init error
usb calibrate configuration timeout,%lu,%lu,%lu
usb calibrate port open timeout%lu,%lu,%lu
USB SERIAL PORT OPENED
usb read timeout
caliberate:what got from host total %d is
preparing reply buf
in function prepare_reply_buf, buf = NULL
in function prepare_reply_buf: Buffer malloc failed
%s caliberate_mode: %x
write efuse failed and error code = %d
calibration=%d,%d,146
/adc.bin
read miscdata adc data error.
%s: cannot read prodnv /adb.bin.
heap@4
set fastboot buffer error
%s%s
FAIL
OKAY
Flashing Lock Flag is locked. Please unlock it first!
 ret is %04x
lcs is %d
data too large
DATA%08x
SOCID
socid is:
subcmd is null.
get_identifier_token
Identifier token:
unknown cmd.
 get backup partition name fail
Write nv img fail
write %s size 0x%llx fail
image write with backup error!
image write error!
bad boot image header
kernel image should not be zero
ramdisk size error
unlock
Not implemet.
Not implement.
unlock_critical
get_unlock_ability
get_unlock_bootloader_nonce
Bootloader can not been locked repeatly.
Lock bootloader fail.
   Info:Lock bootloader success!
Lock bootloader successfully!
unlock_bootloader
Bootloader can not been unlocked repeatly.
Please firstly execute <fastboot oem get_identifier_token>
Unlock bootloader fail.
   Warning: Unlock device may erase user data.
   Press volume down button to confirm that.
   Press volume up button to cancel.
   Info:user cancelled!
Info:user cancel unlock bootloader!
Erase userdata fail.
   Info:Unlock bootloader success!
Info:Unlock bootloader success!
   Begin to erase user data...
------------------------------------------------------------------------
   Warning:RMA will change hardware status and unrecoverable, also will make some secure data unaccessible!
   Do you confirm that you are developer and need this operation really?
   Press button 'Volumn-Down' for 'No'.
   Press button 'Volumn-Up' for 'Yes'.
   The operation will be cancelled automatically after 20 seconds.
------------------------------------------------------------------------
user cancelled
time out
   fastboot mode
getvar:
download:
1.0
flash:
erase:
powerdown
continue
reboot-bootloader
flashing
oem
getlcs
setrma
getsocid
unknown reason
unknown command
misc
partition <misc> read error, can not get recovery message
write partition <misc> fail
boot-recovery
update-radio
/alarm_flag
/poweron_timeinmillis
USB SERIAL CONFIGED failed
Waiting For USB SERIAL PORT OPEN ... ...
%s vbat_vol:%d,comp_vbat:%d
Pressed key: %d
...

you didn't tell where you got all this info from

This is from uboot.bin after I changed the extension and find the strings on it
In Which string you find all of this info
You can search sting like oem ,lock,flash , getvar etc.
Rahmatyus14
Rahmatyus14
Rahmatyus14
Enthusiastic Member
8
05-04-2019, 04:37 AM
#15



(05-04-2019, 03:11 AM)shankar1790
(05-04-2019, 12:48 AM)Rahmatyus14
(04-04-2019, 06:48 PM)X3non
(04-04-2019, 01:22 PM)Rahmatyus14 I got this

Code:

ANDROID!
bad boot image header, give up boot!!!!
kernel image should not be zero!
ramdisk image size should not be zero
os version should not be zero!
config_os_version failed
read dt image table header fail
Cannot validate Device Tree Table
malloc size %d for dt header fail
read dt image table and entries header fail
Getting device tree address failed
dt entry size read error!
dtbo
read dtbo fail
malloc size %d for dtbo fail
%s kernel read error!
load dt error!
%s ramdisk read error!
%s, sprdisk mode failure!
Fatal Error,get_dev mmc failed!
verify get partition %s info failed!
WARNNING: LOCK FLAG IS : UNLOCK, SKIP VERIFY!!!
pass_chip_uid_to_tos()... sizeof(blocks)=%d
blks:0x%08x 0x%08x, result: 0x%x
lcd start init time:%dms
logo
uboot consume time:%dms, lcd init consume:%dms, backlight on time:%dms
pm_sys
cali
autotest
special
apwdgreboot
unknowreboot
   INFO: LOCK FLAG IS : UNLOCK!!!
charger
engtest
alarm
factorytest
fdt_chosen_bootargs_append: %s
fdt_chosen_bootargs_append: cann't find chosen
bootargs len:%d overflow (MAX_BOOTARG_LEN-1)
bootargs len:%d overflow MAX_BOOTARG_LEN
androidboot.verifiedbootstate=green
androidboot.verifiedbootstate=yellow
androidboot.verifiedbootstate=orange
androidboot.verifiedbootstate=red
androidboot.flash.locked=0
androidboot.flash.locked=1
sprd,decoup
cproc-use-decoup
cproc-use-decoup-v1
/reserved-memory
fdt_reserved_mem_multimedia_parse: cann't find mm_reserved
multimediabuffer
tos-mem
audio-mem
overlaybuffer
fdt_chosen_bootargs_replace: %s
fdt_chosen_bootargs_replace: cann't find chosen
fdt_chosen_bootargs_replace: cann't find str %s!
regulator-name
vddarm0
vddarm0 not found
vddarm1
device_type
cannot find bullhill cpu
cpu0-supply
dual-phase-supply
cpu1-supply
pmic2731_wa
sprd,iq-mem
compatible
del iq reserved mem failed
cann't find reserved-memory node
cp-modem
cann't find cp-modem@xxxx node
sprd,cpdbg-size
cannot find reg prop in cp-modem@xxxx node
modem=shutdown
console=ttyS1
console=null
lcd_id=ID
lcd_base=
lcd_size=
%dx%d
 androidboot.serialno=%s
kmemleak=on
 sysdump_magic=%lx
sysdump-uboot
ERROR: cannot set sysdump-uboot node's reg property(addr)!
ERROR: cannot set sysdump-uboot node's reg property(size)!
 adc_cal=%d,%d
 fgu_cal=%d,%d,%d
 mem_cs=%d, mem_cs0_sz=%08x
failed to append ddr training data args bootargs
failed to reserved cs0 ddr training data space
failed to reserved cs1 ddr training data space
ERROR: device tree must have /memory node %s.
ERROR: cannot set /memory node's reg property(addr)!
ERROR: cannot set /memory node's reg property(size)!
bootargs is null
pathcopy string copy failed!
loglevel
read miscdata loglevel data error.
enable
loglevel=7
set logleve = 7 failed!
uart calibrate detecting
usb calibrate configuration timeout
caliberate : what got from host total %d is
0x%x
func: %s line: %d caliberate failed
autotest=1
calibration=%d,%d,130
checked command from pc , and return value = %x
USB SERIAL CONFIGED
func: %s line %d usb trans with error %d
func: %s readly read %d
return ret %d
usb_driver_init error
usb_serial_init error
usb calibrate configuration timeout,%lu,%lu,%lu
usb calibrate port open timeout%lu,%lu,%lu
USB SERIAL PORT OPENED
usb read timeout
caliberate:what got from host total %d is
preparing reply buf
in function prepare_reply_buf, buf = NULL
in function prepare_reply_buf: Buffer malloc failed
%s caliberate_mode: %x
write efuse failed and error code = %d
calibration=%d,%d,146
/adc.bin
read miscdata adc data error.
%s: cannot read prodnv /adb.bin.
heap@4
set fastboot buffer error
%s%s
FAIL
OKAY
Flashing Lock Flag is locked. Please unlock it first!
 ret is %04x
lcs is %d
data too large
DATA%08x
SOCID
socid is:
subcmd is null.
get_identifier_token
Identifier token:
unknown cmd.
 get backup partition name fail
Write nv img fail
write %s size 0x%llx fail
image write with backup error!
image write error!
bad boot image header
kernel image should not be zero
ramdisk size error
unlock
Not implemet.
Not implement.
unlock_critical
get_unlock_ability
get_unlock_bootloader_nonce
Bootloader can not been locked repeatly.
Lock bootloader fail.
   Info:Lock bootloader success!
Lock bootloader successfully!
unlock_bootloader
Bootloader can not been unlocked repeatly.
Please firstly execute <fastboot oem get_identifier_token>
Unlock bootloader fail.
   Warning: Unlock device may erase user data.
   Press volume down button to confirm that.
   Press volume up button to cancel.
   Info:user cancelled!
Info:user cancel unlock bootloader!
Erase userdata fail.
   Info:Unlock bootloader success!
Info:Unlock bootloader success!
   Begin to erase user data...
------------------------------------------------------------------------
   Warning:RMA will change hardware status and unrecoverable, also will make some secure data unaccessible!
   Do you confirm that you are developer and need this operation really?
   Press button 'Volumn-Down' for 'No'.
   Press button 'Volumn-Up' for 'Yes'.
   The operation will be cancelled automatically after 20 seconds.
------------------------------------------------------------------------
user cancelled
time out
   fastboot mode
getvar:
download:
1.0
flash:
erase:
powerdown
continue
reboot-bootloader
flashing
oem
getlcs
setrma
getsocid
unknown reason
unknown command
misc
partition <misc> read error, can not get recovery message
write partition <misc> fail
boot-recovery
update-radio
/alarm_flag
/poweron_timeinmillis
USB SERIAL CONFIGED failed
Waiting For USB SERIAL PORT OPEN ... ...
%s vbat_vol:%d,comp_vbat:%d
Pressed key: %d
...

you didn't tell where you got all this info from

This is from uboot.bin after I changed the extension and find the strings on it
In Which string you find all of this info
You can search sting like oem ,lock,flash , getvar etc.
I just typed 
Strings uboot.img
And then press enter.

It shows so many codes.
Any idea? What command should I need to try?
X3non
X3non
X3non
Recognized Contributor
22,062
05-04-2019, 10:07 AM
#16
(05-04-2019, 04:37 AM)Rahmatyus14 I just typed 
Strings uboot.img
And then press enter.

It shows so many codes.
Any idea? What command should I need to try?

Code:

strings uboot.img | findstr /i oem

this is an example of the command you should use, you can replace OEM with things such as unlock, flashing

BTW does OEM unlocking in setting remain enabled after restarting the phone?
run the commands below in ADB & fastboot and post the results
Code:

adb version
fastboot flashing get_unlock_ability
fastboot oem help

your phone must be connected in fastboot mode when running the fastboot command
This post was last modified: 05-04-2019, 10:19 AM by X3non.
X3non
X3non
X3non
Recognized Contributor
22,062
05-04-2019, 11:11 AM
#17
(05-04-2019, 12:44 AM)Rahmatyus14 ...Android is an open source OS. Why wouldnt they allow us to unlock their devices? Such a dumm thing  Dodgy

can't say for sure why but from their view, it may be the lesser the number of devices unlocked or tampered with, the lesser the number of bricked devices
Pages (2): Previous 1 2
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram