Hovatek Forum MOBILE Android Where can I download Enes A3 MT6572 stock ROM? It is a Samsung clone
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Where can I download Enes A3 MT6572 stock ROM? It is a Samsung clone

Where can I download Enes A3 MT6572 stock ROM? It is a Samsung clone

Pages (2): 1 2 Next
Brian Odeoh
Brian Odeoh
Brian Odeoh
Newbie
3
15-03-2019, 02:08 PM
#1



My phone is bricked and I needed to unbrick it by its stock ROM. Kindly assist, I really need the Enes A3 samsung clone ROM. Thanks in advance
This post was last modified: 15-03-2019, 02:11 PM by Brian Odeoh.
X3non
X3non
X3non
Recognized Contributor
22,062
15-03-2019, 04:07 PM
#2
(15-03-2019, 02:08 PM)Brian Odeoh My phone is bricked and I needed to unbrick it by its stock ROM. Kindly assist, I really need the Enes A3 samsung clone ROM. Thanks in advance

how did the phone get bricked? whats the present condition of the phone? (totally dead or stuck at boot)
have you tried factory resetting the phone?
have you made a firmware backup yet? (you must do this before flashing any roms)
have you tried the firmware listed @ https://www.4shared.com/rar/63Ita7Yuei/E...CLONE.html? ? (cant say if its passworded or not)
Brian Odeoh
Brian Odeoh
Brian Odeoh
Newbie
3
15-03-2019, 06:13 PM
#3
I have tried, but unfortunately it does not complete the flash. It ends flashing at only 12.22MBs with an error;
"ERROR: S_FT_NAND_READLEN_NOT_PAGE_ALIGNMENT (4017)

[User] The read-back of page allocation is not page-aligned on NAND flash!
[HINT] Please check your read address again."

This leaves the phone in an unusable state. The screen only turns when I connect a charger. It flashes white then off when I boot it.
Brian Odeoh
Brian Odeoh
Brian Odeoh
Newbie
3
15-03-2019, 06:15 PM
#4
(15-03-2019, 06:13 PM)Brian Odeoh I have tried, but unfortunately it does not complete the flash. It ends flashing at only 12.22MBs with an error;
"ERROR: S_FT_NAND_READLEN_NOT_PAGE_ALIGNMENT (4017)

[User] The read-back of page allocation is not page-aligned on NAND flash!
[HINT] Please check your read address again."

This leaves the phone in an unusable state. The screen only turns when I connect a charger. It flashes white then off when I boot it.
This post was last modified: 15-03-2019, 06:16 PM by Brian Odeoh.
X3non
X3non
X3non
Recognized Contributor
22,062
16-03-2019, 09:11 AM
#5



(15-03-2019, 06:13 PM)Brian Odeoh ...
This leaves the phone in an unusable state. The screen only turns when I connect a charger. It flashes white then off when I boot it.

attach a full screenshot of the contents of the firmware you downloaded
also check the list @ https://www.hovatek.com/forum/thread-439.html and apply the fix for the error message
Brayod
Brayod
Brayod
Enthusiastic Member
11
04-04-2019, 01:30 PM
#6
(16-03-2019, 09:11 AM)X3non
(15-03-2019, 06:13 PM)Brian Odeoh ...
This leaves the phone in an unusable state. The screen only turns when I connect a charger. It flashes white then off when I boot it.

attach a full screenshot of the contents of the firmware you downloaded
also check the list @ https://www.hovatek.com/forum/thread-439.html and apply the fix for the error message
 Attached is a screenshot of the error message I get when I flash that firmware.
X3non
X3non
X3non
Recognized Contributor
22,062
04-04-2019, 06:35 PM
#7
(04-04-2019, 01:30 PM)Brayod  Attached is a screenshot of the error message I get when I flash that firmware.

upload your screenshot to imgur.com
Brayod
Brayod
Brayod
Enthusiastic Member
11
06-04-2019, 07:06 AM
#8
Here is the link to the screenshot
http://imgur.com/j57eUJW
X3non
X3non
X3non
Recognized Contributor
22,062
06-04-2019, 11:02 AM
#9
(06-04-2019, 07:06 AM)Brayod Here is the link to the screenshot
http://imgur.com/j57eUJW

in your screenshot, you're flashing only secro and userdata when you should be flashing all necessary partitions since the phone is bricked
and still waiting for the screenshot of the contents of the firmware you downloaded
Brayod
Brayod
Brayod
Enthusiastic Member
11
06-04-2019, 01:03 PM
#10



Hello sir, I still get the error after selecting all the possible partitions of the firmware.

Here are the Contents of the Downloaded Firmware.
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram