[Please help] HELP PLZ.. MEIZU M5 NOTE Dead After Format using SP Flash Tool.
[Please help] HELP PLZ.. MEIZU M5 NOTE Dead After Format using SP Flash Tool.
(24-03-2019, 08:29 AM)sicariusM5 ****If I posted in a wrong section, please advise me... Im new here, link me to where this should be.. Thank youu
Please if Anyone can help. I badly badly need your help. . . Highest Appreciations.
So..
It has been 2 long months since I bricked my Meizu M5 Note (M1621), and searched and worked on reviving it. It was running Flyme 7.0 Official, I rooted it. After months of realizing that there's not much to do with a rooted phone and thought about its security, I decided to unroot using SuperSU, but it made it stuck in loading Flyme logo ---- could not boot.
Mistake: I panic and never thought that it has an SD card Slot on sim port 2, so I formatted the Phone using SP flashtool 5.1632. After that, it no longer booted; no power ON, no charging, no recovery...
Steps tried:
****The Phone can still be read by the SP Flash tool. DA Download 100% then fails. So now, I decided to contact Meizu official techs in the Philippines. They're Meizu guardians here, but guess what... they said that the main board is dead. So I pulled the phone back. I think they did it on purpose: After a week, a buddy sent me a message on facebook, asking if I have a bricked Meizu m5 Note. You know what it seemed to be, right?...****
So, I tried now myself: Found four STOCK-ROMS:
- SW_K96092DA1_V007_HW_96092_1_20M21_M1621_USR_signed
- M1621 Flyme 5.2.11.1G (NO Change MB)
- 20161220032104_intl_prd_stable_fvcs_stable_5.2.11.0G
- 20161107170347_prd_stable_fvcs_stable
- Tried Flashing again using the same Version of SP Flash Tool Above, but its getting errors.
Version that were tried so far:
SP Flash tool ver. 5.1632
SP Flash tool ver. 5.1744
SP Flash tool ver. 5.1804
SP Flash tool ver. 5.1824
SP Flash tool ver. 5.1904
And SP Flash tool ver. 5.1452 (never worked)
In all of them, I get the same errors:
ERROR : STATUS_SEC_DL_FORBIDDEN (0xC0020004) - I've read in your respected page that I have to untick the Preloader.bin, but it gets 3 diff errors:
ERROR : STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060003)
ERROR : STATUS_BROM_CMD_SEND_DA_FAIL (0xC0060005)
ERROR : STATUS_SEC_DL_FORBIDDEN (0xC0020004)
- I've also read that the Preloader must be flashed first; tried all those versions above but it gives the forbidden error 20004 still.
- Disassembled the phone, dettached the battery, and flash... Still no good. Same errors.
- Press Volume +, Volume -, or Both before or while plugging the usb to get to META mode, but it got the same error.
Other tools that were tried:
Miracle Box Cracke 2.58 + loader - Downloaded here as well. This tool looked so promising, it read the phone but upon flashing, it crashes. Tried a few times but scared to burn the Main Board...
Miracle thunder 2.82 + loader - It reads the phone, gives the sign that the DA is being downloaded. Stuck in 100%, nothing there after..
If anyone has a questions, and an Idea on how I can flash the firmware to resurrect my Meizu M5 Note again, it would be so appreciated, and praised... The phone is still alive, I know! ,,, but currently in coma.
Thanks in Advanced...
****If I posted in a wrong section, please advise me... Im new here, link me to where this should be.. Thank youu
(24-03-2019, 09:38 AM)innagee Have you tried using the DA & Auth file for your phone model @ https://www.hovatek.com/forum/thread-23874.html to flash the firmware?
(24-03-2019, 09:42 AM)sicariusM5 Yes I have sir. I forgot to mention. Im getting same errors on the said Auth and DA files. Both were downloaded and tested..
Thank you in return.. I hope u still have more idea...
(25-03-2019, 01:03 AM)X3non download firmware for the right variant of your phone from the link @ https://www.hovatek.com/forum/thread-15674.html
try flashing using latest SP flash tool, include the DA & Auth file to spft before flashing
if there's an error message, attach a full screenshot of the error message here
also you can't unlock bootloader of a hardbricked phone and in the current state of the phone when flashing firmware, flash everything ie preloader + other files
(26-03-2019, 09:25 AM)sicariusM5 I downloaded the version Flyme 6.7.8.8G International (G) from the link. For I know that it is my phone variant, global english.
And using the DA and Auth files ---
I still got error upon flashing all with the SPFT with 5.1824: https://ibb.co/J2xpcqf
But in SPFT Latest 5.1904, Im getting LIB DA did not match: https://ibb.co/k6qZ4PZ
I hope you can see the screenshots..
I'm using Windows 10
Im now downloading the Flyme 6.2.0.0A (chinese) Version . . . .
Im gonna update again, but maybe tomorrow.
Sorry. . . cause I just got my new job.. But i will still be active.. hehehe
UPDATE: I was able to download the A version... Tried but same exact errors in both latest versions. BTW.. I also tried the chinese modified spft, but also got forbidden error.
I will be waiting for more suggestions,..
Cheeers!
(26-03-2019, 03:54 PM)X3non
try flashing each partition one after the other, lets know if any is flashable or not
....
(27-03-2019, 10:50 AM)sicariusM5 ...
Next 2 days, I'll bring the device and the ROMs that I got from you guys to someone in my region who has an MRT Dongle..
...