Hovatek Forum MOBILE Android leagoo t5c hardbrick
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


leagoo t5c hardbrick

leagoo t5c hardbrick

slichy
slichy
slichy
Enthusiastic Member
10
28-03-2019, 04:37 PM
#1



my phone was normal before
and then i want to factory reset my phone via standart setting in my phone
but my phone suddenly stuck in android logo (hardbrick ?)
i cant flash my phone cz my pc didnt recognize my phone
maybe my pc cant read my phone's driver or etc
can u help me
thx before
X3non
X3non
X3non
Recognized Contributor
22,062
28-03-2019, 06:15 PM
#2
(28-03-2019, 04:37 PM)slichy my phone was normal before
and then i want to factory reset my phone via standart setting in my phone
but my phone suddenly stuck in android logo (hardbrick ?)
i cant flash my phone cz my pc didnt recognize my phone
maybe my pc cant read my phone's driver or etc
can u help me
thx before

if its stuck on logo then its not hardbricked
do you by any chance remember the build number of your phone?
if you can boot into recovery mode, check if the build number is indicated in recovery mode

BTW you need SPD drivers if you intend to flash this model, see https://www.hovatek.com/forum/thread-827.html
slichy
slichy
slichy
Enthusiastic Member
10
28-03-2019, 09:43 PM
#3
(28-03-2019, 06:15 PM)X3non
(28-03-2019, 04:37 PM)slichy my phone was normal before
and then i want to factory reset my phone via standart setting in my phone
but my phone suddenly stuck in android logo (hardbrick ?)
i cant flash my phone cz my pc didnt recognize my phone
maybe my pc cant read my phone's driver or etc
can u help me
thx before

if its stuck on logo then its not hardbricked
do you by any chance remember the build number of your phone?
if you can boot into recovery mode, check if the build number is indicated in recovery mode

BTW you need SPD drivers if you intend to flash this model, see https://www.hovatek.com/forum/thread-827.html

im not really sure if i remember the build number
i cant boot into recovery
whenever i tried by press voll down or up + power, it will be blank screen and then back to android logo
i think i finished my driver problem, as u can se here.
but when i connect my phone into pc, it still wont be deteced
so i cant flash my phone
what do u think ?
This post was last modified: 28-03-2019, 09:45 PM by slichy.
Attached Files
.png
aaa.png
Size: 71.7 KB / Downloads: 3
shankar1790
shankar1790
shankar1790
Senior Member
474
29-03-2019, 02:39 AM
#4
(28-03-2019, 09:43 PM)slichy
(28-03-2019, 06:15 PM)X3non
(28-03-2019, 04:37 PM)slichy my phone was normal before
and then i want to factory reset my phone via standart setting in my phone
but my phone suddenly stuck in android logo (hardbrick ?)
i cant flash my phone cz my pc didnt recognize my phone
maybe my pc cant read my phone's driver or etc
can u help me
thx before

if its stuck on logo then its not hardbricked
do you by any chance remember the build number of your phone?
if you can boot into recovery mode, check if the build number is indicated in recovery mode

BTW you need SPD drivers if you intend to flash this model, see https://www.hovatek.com/forum/thread-827.html

im not really sure if i remember the build number
i cant boot into recovery
whenever i tried by press voll down or up + power, it will be blank screen and then back to android logo
i think i finished my driver problem, as u can se here.
but when i connect my phone into pc, it still wont be deteced
so i cant flash my phone
what do u think ?

Boot win 10 in test mode then retry(i think you already ). Power of your phone and then press and hold volume up key(down key if not work) and connect in pc. The driver sometime not loaded due to signature problem. Check your usb cable is working or not.
slichy
slichy
slichy
Enthusiastic Member
10
29-03-2019, 05:50 AM
#5



(29-03-2019, 02:39 AM)shankar1790
(28-03-2019, 09:43 PM)slichy
(28-03-2019, 06:15 PM)X3non
(28-03-2019, 04:37 PM)slichy my phone was normal before
and then i want to factory reset my phone via standart setting in my phone
but my phone suddenly stuck in android logo (hardbrick ?)
i cant flash my phone cz my pc didnt recognize my phone
maybe my pc cant read my phone's driver or etc
can u help me
thx before

if its stuck on logo then its not hardbricked
do you by any chance remember the build number of your phone?
if you can boot into recovery mode, check if the build number is indicated in recovery mode

BTW you need SPD drivers if you intend to flash this model, see https://www.hovatek.com/forum/thread-827.html

im not really sure if i remember the build number
i cant boot into recovery
whenever i tried by press voll down or up + power, it will be blank screen and then back to android logo
i think i finished my driver problem, as u can se here.
but when i connect my phone into pc, it still wont be deteced
so i cant flash my phone
what do u think ?

Boot win 10 in test mode then retry(i think you already ). Power of your phone and then press and hold volume up key(down key if not work) and connect in pc. The driver sometime not loaded due to signature problem. Check your usb cable is working or not.

i try in test mode n give a litlle hope.
now when i flash, always stuck in Failed: User cancel
ive tried with different pc, port, n usb cable
shankar1790
shankar1790
shankar1790
Senior Member
474
29-03-2019, 06:15 AM
#6
(29-03-2019, 05:50 AM)slichy
(29-03-2019, 02:39 AM)shankar1790
(28-03-2019, 09:43 PM)slichy
(28-03-2019, 06:15 PM)X3non
(28-03-2019, 04:37 PM)slichy my phone was normal before
and then i want to factory reset my phone via standart setting in my phone
but my phone suddenly stuck in android logo (hardbrick ?)
i cant flash my phone cz my pc didnt recognize my phone
maybe my pc cant read my phone's driver or etc
can u help me
thx before

if its stuck on logo then its not hardbricked
do you by any chance remember the build number of your phone?
if you can boot into recovery mode, check if the build number is indicated in recovery mode

BTW you need SPD drivers if you intend to flash this model, see https://www.hovatek.com/forum/thread-827.html

im not really sure if i remember the build number
i cant boot into recovery
whenever i tried by press voll down or up + power, it will be blank screen and then back to android logo
i think i finished my driver problem, as u can se here.
but when i connect my phone into pc, it still wont be deteced
so i cant flash my phone
what do u think ?

Boot win 10 in test mode then retry(i think you already ). Power of your phone and then press and hold volume up key(down key if not work) and connect in pc. The driver sometime not loaded due to signature problem. Check your usb cable is working or not.

i try in test mode n give a litlle hope.
now when i flash, always stuck in Failed: User cancel
ive tried with different pc, port, n usb cable

User cancel error means the usb cable disconnected from pc.
Please check this thread for RDT error and fix
https://www.hovatek.com/forum/thread-4870.html
shankar1790
shankar1790
shankar1790
Senior Member
474
29-03-2019, 06:17 AM
#7
Failed: User cancel

Message: Failed: User cancel

Meaning: The flashing process was interrupted by holding or releasing the volume down button at the wrong time

Solution:
Ensure to hold the volume down button when connecting to PC for flashing and don't release till flashing is complete
slichy
slichy
slichy
Enthusiastic Member
10
30-03-2019, 06:19 AM
#8
after my trial n error, the conclusion is i should hold vol down button n connect battery in the right time when flashing my phone.
its really hard to identify it. but after that my pfone successed to be flashed
after 1 day using this phone, last night i charged my phone when switch off.
but in the morning my phone really dead.
when i connect to charger or pc, it show nothing.
even my pc cant detect that.
any idea about this condition ?
X3non
X3non
X3non
Recognized Contributor
22,062
30-03-2019, 10:31 AM
#9
(30-03-2019, 06:19 AM)slichy after my trial n error, the conclusion is i should hold vol down button n connect battery in the right time when flashing my phone.
its really hard to identify it. but after that my pfone successed to be flashed
after 1 day using this phone, last night i charged my phone when switch off.
but in the morning my phone really dead.
when i connect to charger or pc, it show nothing.
even my pc cant detect that.
any idea about this condition ?

either a totally drained battery or faulty hardware
try a new or different battery
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram