Hovatek Forum MOBILE Android Phone not working properly after flashing rom
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Phone not working properly after flashing rom

Phone not working properly after flashing rom

Onabajo
Onabajo
Onabajo
Enthusiastic Member
5
08-04-2019, 02:07 PM
#1



Hello house. i flashed a stock rom from hovatek on my infinix x623. 

(the rom was gotten from https://www.hovatek.com/forum/thread-25856.html), you can see peoples' complaints about the rom too on that thread.

afterwards the phone isn't supporting full android. all i have on the phone is mmi1 test, mmi2 test, runtime test, hqlog, calibration test, fingerprint test. the drop down menu/notification isnt working. the system update closes immediately it is open. i cannot install any other app on the phone, gapps are missing.

even after doing a system reset the situation remains the same. the build number of the rom is x623-ql1819abcdefi-o-181106v38. i flashed using qfil.
please help, I'm begging.
This post was last modified: 08-04-2019, 02:18 PM by Onabajo.
X3non
X3non
X3non
Recognized Contributor
22,062
08-04-2019, 05:32 PM
#2
(08-04-2019, 02:07 PM)Onabajo Hello house. i flashed a stock rom from hovatek on my infinix x623. 

(the rom was gotten from https://www.hovatek.com/forum/thread-25856.html), you can see peoples' complaints about the rom too on that thread.

afterwards the phone isn't supporting full android. all i have on the phone is mmi1 test, mmi2 test, runtime test, hqlog, calibration test, fingerprint test. the drop down menu/notification isnt working. the system update closes immediately it is open. i cannot install any other app on the phone, gapps are missing.

even after doing a system reset the situation remains the same. the build number of the rom is x623-ql1819abcdefi-o-181106v38. i flashed using qfil.
please help, I'm begging.

the same thread with complaints also has someone who posted a solution he used
have you tried flashing using the tool @ https://www.hovatek.com/forum/thread-26553.html ?
Onabajo
Onabajo
Onabajo
Enthusiastic Member
5
08-04-2019, 05:59 PM
#3
yes I have tried using the HQXA_Transsion_CustomerDL_EMMC_V1.19.5 tool. it didnt work. Please, i need the link to the rom the person used. someone said he tried using another rom.
thank you.
Onabajo
Onabajo
Onabajo
Enthusiastic Member
5
09-04-2019, 06:45 AM
#4
yes I have tried using the HQXA_Transsion_CustomerDL_EMMC_V1.19.5 tool. it didnt work. Please, i need the link to the rom the person used. someone said he tried using another rom.
thank you.
X3non
X3non
X3non
Recognized Contributor
22,062
09-04-2019, 09:41 AM
#5



(08-04-2019, 05:59 PM)Onabajo yes I have tried using the HQXA_Transsion_CustomerDL_EMMC_V1.19.5 tool. it didnt work. Please, i need the link to the rom the person used. someone said he tried using another rom.
thank you.

which option did you choose in hqxa; firmware upgrade?
do you have access to a hardware box / dongle?

the firmwares we have are listed @ https://www.hovatek.com/forum/thread-25856.html
you can click on the person's username you're referring to > then check if there's a link labeled "send *** an email"
use the email link to contact the person then hope he shares the firmware link
This post was last modified: 09-04-2019, 09:41 AM by X3non.
allaniayoub
allaniayoub
allaniayoub
Newbie
3
01-12-2019, 03:22 AM
#6
My Solution for no Gapps (apps missing/ only mmi1/2 tests....):
# Use Miracle Box, go to Qualcomm > Read/Format flash > uncheck "Auto programmer"> Choose programmer from the stock room you have ( https://prnt.sc/q4h5mt )
# Put your phone in EDL mode (i have x623 so I turned it off > hold volume "+" and "-" > click on port (you should have Qualcomm drivers installed already..) ( https://prnt.sc/q4h66s )
# Make sure it's "Read Partitions" then hit "Start Button" ( https://prnt.sc/q4h6e0 )
# When done, unselect all > search for "persist" > check "wipe selected" > Press "start button" ( https://prnt.sc/q4h6zk )
If all done well, restart your phone, if you have issues just reconnect the phone and good luck!

Really took me much time, i can't afford to donate to hovatek and since the first day i removed adblock for support <3 you are a good man, I'll go now spread my solution in other threads where people didn't find a solution.
X3non
X3non
X3non
Recognized Contributor
22,062
02-12-2019, 12:58 AM
#7
(01-12-2019, 03:22 AM)allaniayoub ...
Really took me much time, i can't afford to donate to hovatek and since the first day i removed adblock for support <3 you are a good man, I'll go now spread my solution in other threads where people didn't find a solution.

thanks for support, also don't forget to share hovatek with friends
BTW you might want to see an easier fix to no gapps issue @ https://www.hovatek.com/forum/thread-30625.html
jdfm
jdfm
jdfm
Senior Member
299
27-06-2020, 03:29 PM
#8
(01-12-2019, 03:22 AM)allaniayoub My Solution for no Gapps (apps missing/ only mmi1/2 tests....):
# Use Miracle Box, go to Qualcomm > Read/Format flash > uncheck "Auto programmer"> Choose programmer from the stock room you have ( https://prnt.sc/q4h5mt )
# Put your phone in EDL mode (i have x623 so I turned it off > hold volume "+" and "-"  > click on port (you should have Qualcomm drivers installed already..) ( https://prnt.sc/q4h66s )
# Make sure it's "Read Partitions" then hit "Start Button" ( https://prnt.sc/q4h6e0 )
# When done, unselect all > search for "persist" > check "wipe selected" > Press "start button" ( https://prnt.sc/q4h6zk )
If all done well, restart your phone, if you have issues just reconnect the phone and good luck!

Really took me much time, i can't afford to donate to hovatek and since the first day i removed adblock for support <3 you are a good man, I'll go now spread my solution in other threads where people didn't find a solution.
God bless you brother....This brought my device back to life.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram