Hovatek Forum MOBILE Android [Please help] Please help me backup TECNO Camon X (CA7) firmware
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Please help me backup TECNO Camon X (CA7) firmware

[Please help] Please help me backup TECNO Camon X (CA7) firmware

Pages (2): Previous 1 2
X3non
X3non
X3non
Recognized Contributor
22,062
12-05-2019, 11:28 PM
#11



(11-05-2019, 04:09 PM)chabbzz07 I tried using miracle box thunder edition. I'd select MTK then under service tab, I select Read. I tried both 8th boot(MT65xx & MT67xx/8127) and Boot(DA_SWSEC)(MT65xx & MT67xx), but once I connect the phone, Miracle Box shows >>Downloading Boot8 ..., the bar underneath shows 100% and my phone boots up just as soon as I connect it. Is the phone supposed to boot up?

if these are the steps you made, it doesn't seem like you selected the DA for your model
see https://www.hovatek.com/forum/thread-23733.html for how to use DA file in miracle box and you're to try both DA files listed for CA7
select the DA and leave miracle box at 4th auto boot before you proceed
This post was last modified: 12-05-2019, 11:29 PM by X3non.
chabbzz07
chabbzz07
chabbzz07
Junior Member
20
13-05-2019, 02:15 AM
#12
(12-05-2019, 11:28 PM)X3non
(11-05-2019, 04:09 PM)chabbzz07 I tried using miracle box thunder edition. I'd select MTK then under service tab, I select Read. I tried both 8th boot(MT65xx & MT67xx/8127) and Boot(DA_SWSEC)(MT65xx & MT67xx), but once I connect the phone, Miracle Box shows  >>Downloading Boot8 ..., the bar underneath shows 100% and my phone boots up just as soon as I connect it. Is the phone supposed to boot up?

if these are the steps you made, it doesn't seem like you selected the DA for your model
see https://www.hovatek.com/forum/thread-23733.html for how to use DA file in miracle box and you're to try both DA files listed for CA7
select the DA and leave miracle box at 4th auto boot before you proceed

Hi. I have done all that. I always make sure to use the correct DA file provided in these forums.
X3non
X3non
X3non
Recognized Contributor
22,062
13-05-2019, 09:29 AM
#13
(13-05-2019, 02:15 AM)chabbzz07 Hi. I have done all that. I always make sure to use the correct DA file provided in these forums.

use the method @ https://www.hovatek.com/forum/thread-21970.html for backup
if you encounter any errors, then attach full screenshot of the error message
chabbzz07
chabbzz07
chabbzz07
Junior Member
20
14-05-2019, 01:56 PM
#14
(13-05-2019, 09:29 AM)X3non
(13-05-2019, 02:15 AM)chabbzz07 Hi. I have done all that. I always make sure to use the correct DA file provided in these forums.

use the method @ https://www.hovatek.com/forum/thread-21970.html for backup
if you encounter any errors, then attach full screenshot of the error message

Here is the error message that I get.
This post was last modified: 14-05-2019, 01:57 PM by chabbzz07.
Attached Files
.jpg
BROM.jpg
Size: 818.52 KB / Downloads: 9
X3non
X3non
X3non
Recognized Contributor
22,062
14-05-2019, 10:55 PM
#15



(14-05-2019, 01:56 PM)chabbzz07 Here is the error message that I get.

the error indicates you're not using the right DA
you're to input the custom DA you downloaded into the download agent in download tab before switching to readback tab
chabbzz07
chabbzz07
chabbzz07
Junior Member
20
15-05-2019, 12:00 AM
#16
(14-05-2019, 10:55 PM)X3non
(14-05-2019, 01:56 PM)chabbzz07 Here is the error message that I get.

the error indicates you're not using the right DA
you're to input the custom DA you downloaded into the download agent in download tab before switching to readback tab

I have done that. I have tried both available DA files for the procedure and I keep getting the same error message.
I have even tried connecting while holding down the volume down button. and tried again while holding the volume up key with both DA files. The same error keeps coming up.
This post was last modified: 15-05-2019, 12:18 AM by chabbzz07.
chabbzz07
chabbzz07
chabbzz07
Junior Member
20
15-05-2019, 01:41 AM
#17
(14-05-2019, 10:55 PM)X3non
(14-05-2019, 01:56 PM)chabbzz07 Here is the error message that I get.

the error indicates you're not using the right DA
you're to input the custom DA you downloaded into the download agent in download tab before switching to readback tab

So I took your advise, but in stead of using the DA files for CA7 kin SP flash tool, I used the DA file in Miracle Box, Thunder edition. Backed up my current firmware successfully and have even patched and flashed boot.img. 

Thanks again for all the information. I have learnt some pretty sweet stuff here.
Pages (2): Previous 1 2
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram