Hi, Guest! Login / Register
Giveaway: Free Hovatek T-shirts, Hoodies & Cufflinks.. I WANT ONE! (Nov 25, 2017)
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

Need Help Restoring Soft Bricked Tecno M7

#21

I tried clicking on "ROOT" but get the message
" ATTENTION! Requests for confirmation on the device screen are possible!
ERROR: SU inacessible "


I guess I go back to the SP tools route then


Reply
#22
For backing up the entire ROM, in the SP tools, I'm picking the hex addresses from start address 0x000000.... to the FAT address as the length. However, there is another address after FAT, called " bmtpool " . Is stopping at the FAT address alright or should I included this last item bmtpool ?
Reply
#23
After setting the hex values, I tried doing the read-back, via the sp tools, with the phone in recovery mode. Nothing happened; the progress bar didn't move from 0%

I tried it with the phone switched off, but the pc didn't recognize the device to begin with.

Is there a work-around for getting these mtk drivers ?
Reply
#24
(04-24-2015, 11:22 AM)hovatek Wrote: [quote='Soul' pid='22677' dateline='1429860923']
Sadly no, not in my current location.  Confused

ok. will have to get you the map values. first, download m7 scatter file @ https://forum.hovatek.com/thread-88.html
then boot into recovery mode and do a backup (just in case it comes in handy)
let me know when done
Please I need help on how to repair my bricked infinix x403 I tried recovery mode it's serves futile I need help on the (scatter file, recovery.img and stock Rom) sir
Reply
#25
(This post was last modified: 04-25-2015, 12:03 AM by hovatek. )
(04-24-2015, 07:07 PM)Soul Wrote: After setting the hex values, I tried doing the read-back, via the sp tools, with the phone in recovery mode. Nothing happened; the progress bar didn't move from 0%

I tried it with the phone switched off, but the pc didn't recognize the device to begin with.

Is there a work-around for getting these mtk drivers ?

you first need to install vcom drivers using https://forum.hovatek.com/thread-440.html
the phone is supposed to be switched off with battery inside when connecting to PC. see the video at the guide
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#26
(04-24-2015, 08:09 PM)Freezballs Wrote: Please I need help on how to repair my bricked infinix x403 I tried recovery mode it's serves futile I need help on the (scatter file, recovery.img and stock Rom) sir

create a new thread by clicking https://forum.hovatek.com/newthread.php?fid=4
this is someone else's support thread
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#27
(04-25-2015, 12:02 AM)hovatek Wrote:
(04-24-2015, 07:07 PM)Soul Wrote: After setting the hex values, I tried doing the read-back, via the sp tools, with the phone in recovery mode. Nothing happened; the progress bar didn't move from 0%

I tried it with the phone switched off, but the pc didn't recognize the device to begin with.

Is there a work-around for getting these mtk drivers ?

you first need to install vcom drivers using https://forum.hovatek.com/thread-440.html
the phone is supposed to be switched off with battery inside when connecting to PC. see the video at the guide

I had already installed the vcom drivers. I thought they are different from the mtk drivers obtained via Pdanet ?
Reply
#28
For backing up the entire ROM, in the SP tools, I'm picking the hex addresses from start address 0x000000.... to the FAT address as the length. However, there is another address after the FAT item, called " bmtpool " . Is stopping at the FAT address alright or should I included this last item bmtpool ?
Reply
#29
so.. ROM backup has been completed and the files have been processed in mtk-droid-tools. I made two sets of backups; one of 0x00 to FAT, and another of 0x00 to bmtpool.

Please explain the next step..
Reply
#30
While processing the ROM in mtk-droid-tools, after clicking on "To make CWM recovery automatically", I get an error "ATTENTION! Recovery doesn't suit this phone! "

kindly advise
Reply










Users browsing this thread:
1 Guest(s)