Meizu m6 hang on logo after i did factory reset with cm2mt2
Meizu m6 hang on logo after i did factory reset with cm2mt2
(17-06-2019, 08:44 PM)ricardo ngong please help i reset my phone meizu m6 with cm2mt2 now phone hang on logo please help me with scatta files so that i can unbreak this logs belowWhat was wrong with the phone before factory resetting?
PTFN : MediaTek PreLoader USB VCOM Port (COM5)
MODE : PRELOADER PORT
PORT : 5
Waiting BOOT ack ...
PRELOADER : ACK confirmed!
BROM : Init BROM
BROM init passed!
CHIP : MT6755 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0001
TYPE : MODERN RAPHAEL
BROM : SecLevel : 0x00000007
BROM : SecMode : SBC+SLA+SDA
BROM : PRELOADER PORT
MODE : Meizu : M3s_M5n_U10 | Manual : Disabled
AGENT : Look for suitable BootChain in DA ...
AGENT : DA_PL.bin
AGENT : Found MT6755
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
DA : SYNC
DA : MODE : PRELOADER
DA : EXT_RAM initialized!
DA : BOOT to 2nd DA ...
DA : 2ND stage confirmed!
DA : SYNC with DA passed!
DA : Receiving HW info
SRAM: 0x00040000 [ 256.00 KB ]
DRAM: 0x80000000 [ 2.00 GB ]
EMMC: 150100475836424D42034351C8E6B4F5
EMMC: VEN : SAMSUNG | OEM : 01 | DEV : GX6BMB
EMMC:
BOOT1 : 0x00400000 [ 4.00 MB ]
BOOT2 : 0x00400000 [ 4.00 MB ]
RPMB : 0x00400000 [ 4.00 MB ]
USER : 0x747C00000 [ 29.12 GB ]
CHIP : MT6750 , SBID : 0x8A00 , HWVR : 0xCB00 , SWVR : 0x0008 , EVOL : 0x0000
RNID : FC7608502C6E3AAF62DD7AD57A6A43C1
DA : USB : HIGH-SPEED
Boot done!
Patch Level : NRD90M
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2019-03-01
Build Time : 1554686821
Board Platform : mt6750
Product Brand : Meizu
Product Manfct : Meizu
Display ID : Flyme 7.1.2.0G
Product Model : MEIZU M6
Product Name : meizu_M6
Product Device : meizu_M6
Product Board : M6
Product Info : M6
USERDATA : PLAIN ( NOT encrypted )
(18-06-2019, 01:02 PM)ricardo ngong i forgot password and when i tried to do hard reset it wasn't going so i decided to do it with cm2mt2 before hang on logo then i tried to go into the phone recovery again to no avail.you'll need to flash the stock ROM.
(18-06-2019, 04:00 PM)ricardo ngong sir i never took the build number before phone got to this state all i did was identify with infinity cm2mt2 and i posted it above but at the presnt state phone doesnt enter in a recovery modecan you get access to a working device of the same model?
Patch Level : NRD90M
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2019-03-01
Build Time : 1554686821
Board Platform : mt6750
Product Brand : Meizu
Product Manfct : Meizu
Display ID : Flyme 7.1.2.0G
Product Model : MEIZU M6
Product Name : meizu_M6
Product Device : meizu_M6
Product Board : M6
Product Info : M6
(18-06-2019, 04:00 PM)ricardo ngong sir i never took the build number before phone got to this state all i did was identify with infinity cm2mt2 and i posted it above but at the presnt state phone doesnt enter in a recovery mode
Patch Level : NRD90M
Ver. CodeName : REL
Ver. Release : 7.0
Sec. Patch : 2019-03-01
Build Time : 1554686821
Board Platform : mt6750
Product Brand : Meizu
Product Manfct : Meizu
Display ID : Flyme 7.1.2.0G
Product Model : MEIZU M6
Product Name : meizu_M6
Product Device : meizu_M6
Product Board : M6
Product Info : M6
(20-06-2019, 11:05 AM)ricardo ngong by pressing vol up and power button at the same time. i tried time an again phone wasn't booting to recovery so that i could used the zip file.
so i came across a similar tread in another forum which i saw a stock ROM and i download in the file was only the userdata when i flash using the sp flash tool phone couldn't come on again so now phone is dead and still detect in the PC
so i really need help now to bring this phone to it normal state