E5573Cs-322

Bubrak
Junior Member

22

18-06-2019, 08:54 AM

#1

Hello guys i downgraded my zong device (Huawei) but the process does not go well my device ran into trouble device died in the process i try everything balong usb loader with boot shot but i have no success.only signal red light is gets on when i connect it to the pc no bettry light is showing nor i can get into the boot menu please anyone can help......device information is given below

Found modem : E5573Cs-322
Model : Huawei E5573 (untested)
Firmware : 21.333.64.00.1456
Dashboard version : WEBUI_17.100.20.01.306_MRE5
Web UI version : WEBUI_17.100.20.01.306_MRE5

This post was last modified: 25-06-2019, 07:22 AM by Bubrak.

Attached Files

1.jpeg
Size: 182.57 KB / Downloads: 23

2.jpeg
Size: 161.56 KB / Downloads: 20

3.jpeg
Size: 127.06 KB / Downloads: 19

4.jpeg
Size: 145.56 KB / Downloads: 20

Bubrak
Junior Member

22

18-06-2019, 08:57 AM

#2

Hello guys i downgraded my zong device (Huawei) but the process does not go well my device ran into trouble device died in the process i try everything balong usb loader with boot shot but i have no success.only signal red light is gets on when i connect it to the pc no bettry light is showing nor i can get into the boot menu please anyone can help......device information is given below and some images are also attached

Found modem : E5573Cs-322
Model : Huawei E5573 (untested)
Firmware : 21.333.64.00.1456
Dashboard version : WEBUI_17.100.20.01.306_MRE5
Web UI version : WEBUI_17.100.20.01.306_MRE5

Attached Files

1.jpeg
Size: 182.57 KB / Downloads: 59

2.jpeg
Size: 161.56 KB / Downloads: 13

3.jpeg
Size: 127.06 KB / Downloads: 13

4.jpeg
Size: 145.56 KB / Downloads: 14

Bubrak
Junior Member

22

20-06-2019, 11:21 AM

#3

Help plz

X3non
Recognized Contributor

22,062

20-06-2019, 12:39 PM

#4

(18-06-2019, 08:54 AM)Bubrak Hello guys i downgraded my zong device (Huawei) but the process does not go well my device ran into trouble device died in the process i try everything balong usb loader with boot shot but i have no success.only signal red light is gets on when i connect it to the pc no bettry light is showing nor i can get into the boot menu please anyone can help......device information is given below

Found modem : E5573Cs-322
Model : Huawei E5573 (untested)
Firmware : 21.333.64.00.1456
Dashboard version : WEBUI_17.100.20.01.306_MRE5
Web UI version : WEBUI_17.100.20.01.306_MRE5

how did you attempt to downgrade in the first place?
see this screenshot @ https://www.hovatek.com/forum/attachment.php?aid=6590 ; it almost seems as if usbloader was flashed successfully, how long did it take balong downloader progress bar to go from 0% to 100%? (almost immediately or a few minutes)
power on the mifi then connect to the PC, what does device manager detect the device as?

Bubrak
Junior Member

22

21-06-2019, 05:13 AM

#5

Usbloader not works

This post was last modified: 21-06-2019, 05:29 AM by Bubrak.

Bubrak
Junior Member

22

21-06-2019, 05:20 AM

#6

Ok i will

This post was last modified: 21-06-2019, 05:26 AM by Bubrak.

Bubrak
Junior Member

22

21-06-2019, 05:26 AM

#7

(20-06-2019, 12:39 PM)X3non
(18-06-2019, 08:54 AM)Bubrak Hello guys i downgraded my zong device (Huawei) but the process does not go well my device ran into trouble device died in the process i try everything balong usb loader with boot shot but i have no success.only signal red light is gets on when i connect it to the pc no bettry light is showing nor i can get into the boot menu please anyone can help......device information is given below

Found modem : E5573Cs-322
Model : Huawei E5573 (untested)
Firmware : 21.333.64.00.1456
Dashboard version : WEBUI_17.100.20.01.306_MRE5
Web UI version : WEBUI_17.100.20.01.306_MRE5

how did you attempt to downgrade in the first place?
see this screenshot @ https://www.hovatek.com/forum/attachment.php?aid=6590 ; it almost seems as if usbloader was flashed successfully, how long did it take balong downloader progress bar to go from 0% to 100%? (almost immediately or a few minutes)
power on the mifi then connect to the PC, what does device manager detect the device as?

Balong usb loader summary after loading 100

COM3 - HUAWEI Mobile Connect - 3G PC UI Interface [BOOT_3G]
USB\VID_12D1&PID_1443&REV_0001
USB\VID_12D1&PID_1443

Ïàðàìåòðû çàãðóçêè:
00000001. 00000F60 10000000 00000054
00000002. 00592CA8 57900000 00000FB4
Íàéäåíî 2 áëîêà(îâ) äëÿ çàãðóçêè.

Ïûòàåìñÿ îòêðûòü óñòðîéñòâî \\.\COM3 ...
Çàãðóçêà áëîêà 0, àäðåñ=10000000, ðàçìåð=3936
Âñåãî ïàêåòîâ â áëîêå [0]: 4
Ìîäåì îòâåðã ïàêåò êîíöà äàííûõ. Îáðàç ïàêåòà:

0000: ED 05 FA 53 C0 *í.úSÀ *

Sent from my iPhone using Hovatek Forum

Bubrak
Junior Member

22

21-06-2019, 05:29 AM

#8

(20-06-2019, 12:39 PM)X3non
(18-06-2019, 08:54 AM)Bubrak Hello guys i downgraded my zong device (Huawei) but the process does not go well my device ran into trouble device died in the process i try everything balong usb loader with boot shot but i have no success.only signal red light is gets on when i connect it to the pc no bettry light is showing nor i can get into the boot menu please anyone can help......device information is given below

Found modem : E5573Cs-322
Model : Huawei E5573 (untested)
Firmware : 21.333.64.00.1456
Dashboard version : WEBUI_17.100.20.01.306_MRE5
Web UI version : WEBUI_17.100.20.01.306_MRE5

how did you attempt to downgrade in the first place?
see this screenshot @ https://www.hovatek.com/forum/attachment.php?aid=6590 ; it almost seems as if usbloader was flashed successfully, how long did it take balong downloader progress bar to go from 0% to 100%? (almost immediately or a few minutes)
power on the mifi then connect to the PC, what does device manager detect the device as?

Usbloader did not take much time 0 to 100 in one second i downgraded it by it exe file after that device had only red light on signal light normaly it has two lights one for bettey and other for signal. The device cannot get into download menu also by pressing power button and reset button together did not work all i need a usbloader e5573cs-322 21.333.64.00.1456 and about the picture pls check them all you will see it check the image in which at the end right is (usa 1*)

Sent from my iPhone using Hovatek Forum

Bubrak
Junior Member

22

21-06-2019, 04:50 PM

#9

Device manager detects as port and named it as "COM3 - HUAWEI Mobile Connect - 3G PC UI "

Sent from my iPhone using Hovatek Forum

X3non
Recognized Contributor

22,062

21-06-2019, 09:54 PM

#10

(21-06-2019, 04:50 PM)Bubrak Device manager detects as port and named it as "COM3 - HUAWEI Mobile Connect - 3G PC UI "

Sent from my iPhone using Hovatek Forum

there's no new usbloader for cs-322 running higher firmware versions atm, which exe file did you use to perform this downgrade and where did you get it from? post link and was the downgrade process successful or not?

View a Printable Version

Users browsing this thread:
1 Guest(s)

Find us

Call us

Mail us

Useful Links

Actions