Hovatek Forum MOBILE Android Infinix Hot X606D Stuck On Red State
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Infinix Hot X606D Stuck On Red State

Infinix Hot X606D Stuck On Red State

AtomAdeyemi
AtomAdeyemi
AtomAdeyemi
Enthusiastic Member
7
26-06-2019, 04:02 PM
#1



My infinix hot x606d got stuck on red state & wont boot completely.
This happened after installing an update & restart.
i attempted to flash with sp flashtool but failed with brom error due to the device having secure boot.
i also attempted with miracle box (thunder edition) after downloading the da.bin file for infinix x606d from this site.
I applied everything accordingly & initiated the flash.
first error...something about 5a error.
i decided to skip preloader....then retry.
then progress was on vendor flashing n it stopped on 90% with another error.
i unchecked vendor n retried.
the whole flashing went well.
until i decided to boot n realized the device isnt booting nor charging.
.
.
please help.
i have misplaced box n receipt so carlcare refused to help me
hovatek
hovatek
hovatek
Administrator
49,570
26-06-2019, 05:51 PM
#2
(26-06-2019, 04:02 PM)AtomAdeyemi My infinix hot x606d got stuck on red state & wont boot completely.
This happened after installing an update & restart.
i attempted to flash with sp flashtool but failed with brom error due to the device having secure boot.
i also attempted with miracle box (thunder edition) after downloading the da.bin file for infinix x606d from this site.
I applied everything accordingly & initiated the flash.
first error...something about 5a error.
i decided to skip preloader....then retry.
then progress was on vendor flashing n it stopped on 90% with another error.
i unchecked vendor n retried.
the whole flashing went well.
until i decided to boot n realized the device isnt booting nor charging.
.
.
please help.
i have misplaced box n receipt so carlcare refused to help me

First, hold down the Power button then connect the phone to a charging source. Give it about 30 seconds.
If still no boot, retry flashing using software download tool @ https://www.hovatek.com/forum/thread-23709.html
I believe the firmware you're using is signed or from https://www.hovatek.com/forum/thread-23659.html
This post was last modified: 26-06-2019, 05:52 PM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
AtomAdeyemi
AtomAdeyemi
AtomAdeyemi
Enthusiastic Member
7
27-06-2019, 08:13 AM
#3
I have successfully reflashed it.
When I try to use software download tool.
It still didn't work.. Brim error.
I copied the secure boot da file n paste it in the directory of the software download tool.
Deleted the one there n rename the new one to make it look similar to the software.
.
Then I reflashed...Passed first step.
Second step failed.
So I unscrew the phone... Detached the battery.. Connected it back n flashed.
.
It worked successfully.
But after booting...imei was empty.
So I downloaded nvdata & nvram file.
Edited the scatter loader n added the files to the details there.
Arranged them properly then flash only those nvdata n nvram using miracle thunder.
.
Phone got bricked again after flashing but the nvram n nvdata went in successfully.
So I reflashed full ROM excluding nvram n nvdata using software download tool.
And the imei is back.
.
.
.
Thanks for your assistance!
SAQ
SAQ
SAQ
Newbie
2
27-06-2019, 12:54 PM
#4
i cannot open the download on Mega. it says the file is corrupted. my phone is stuck on Fastboot
AtomAdeyemi
AtomAdeyemi
AtomAdeyemi
Enthusiastic Member
7
27-06-2019, 01:04 PM
#5



SAQ i cannot open the download on Mega. it says the file is corrupted. my phone is stuck on Fastboot
Which of the file? Are you referring to the firmware or da file or software download tool?
check your message box
X3non
X3non
X3non
Recognized Contributor
22,062
27-06-2019, 07:45 PM
#6
(27-06-2019, 12:54 PM)SAQ i cannot open the download on Mega. it says the file is corrupted. my phone is stuck on Fastboot

see https://www.hovatek.com/forum/thread-18831.html for how to download from mega
if you still have any problems then create a new thread for your device issue as this is someone else's thread
see https://www.hovatek.com/forum/thread-514.html for how to create a thread
hovatek
hovatek
hovatek
Administrator
49,570
30-06-2019, 07:16 AM
#7
(27-06-2019, 08:13 AM)AtomAdeyemi ...
It worked successfully.
But after booting...imei was empty.
So I downloaded nvdata & nvram file.
Edited the scatter loader n added the files to the details there.
Arranged them properly then flash only those nvdata n nvram using miracle thunder.
.
Phone got bricked again after flashing but the nvram n nvdata went in successfully.
So I reflashed full ROM excluding nvram n nvdata using software download tool.
And the imei is back.
.
.
.
Thanks for your assistance!

Great! We've added the NVRAM + Nvdata from our component files collection to https://www.hovatek.com/forum/thread-19499.html for others in the same shoes
This post was last modified: 30-06-2019, 07:21 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram