This is a quick guide showing how to load a custom firehose programmer file into miracle box. I'm using miracle thunder 2.82 as an example in this guide
Custom firehose programmer file ; Either download and try different firehose programmer files for your device chipset listed @ https://www.hovatek.com/forum/thread-25696.html OR search online for and download firmware for your model, the programmer file might be included
How to load a custom firehose programmer file into miracle box
Extract the content of the Miracle Box, open the folder and launch miracle box tool
Click the "Qualcomm" tab
Click "Read / Format Flash" tab
Untick the checkbox beside "Auto" which is just beside Model
Untick the checkbox beside "Auto Programmer" which is under the label programmer
Click the button labelled as "..."
In the new window that opens next, navigate to and select your firehose programmer file
You can now switch over to a different tab and carry out the procedure you intend to e.g Extra tab to perform FRP reset i.e "Remove Account Lock (Other)"
Important Notice
Miracle Box ideally requires a hardware box / dongle in order to work so merely installing the setup will get you nowhere unless you're using a loader version
The loader version might spook your antivirus. While its safe to run, you are entirely responsible for white-listing it or temporarily disabling your antivirus just to get the loader to work
If you're using random programmer file for your chipset, be sure to try as many as you can possibly find cause there's no telling which one might work (if at all any will work)
This post was last modified: 16-04-2020, 09:28 AM by X3non.