Hi, Guest! Login / Register




Thread Rating:
  • 2 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Tutorial] How to fix a totally dead MTK phone; wont come on, charge or show any sign of life


(08-25-2014, 12:46 PM)hovatek Wrote:
(08-25-2014, 12:12 PM)StvOchi Wrote: Still no change. Please help me.

1. List the files in your backup folder
2. what does SP flash tool show when you try flashing files
1. It is the mtk stock backup which i downloaded here (boot, ebr1, lk, logo, mbr, MT6572_Android_scatter, preloader, recovery, secro & system).

2. Sp flash tool loads the red bar then brings this error Sad4032) S_FT_ENABLE_DRAM_FAIL or just brings this error: (1013) S_COM_PORT_OPEN_FAIL
I have run out of ideas on what to do.


Reply
Have you read http://forum.hovatek.com/showthread.php?tid=439 ?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
(08-28-2014, 07:19 AM)hovatek Wrote: Have you read http://forum.hovatek.com/showthread.php?tid=439 ?
I have tried all that but still no change
Reply
(08-28-2014, 07:19 AM)hovatek Wrote: Have you read http://forum.hovatek.com/showthread.php?tid=439 ?
I have tried all that but still no change.
Reply
Please, give a brief summary of what happened to the phone
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
(This post was last modified: 08-28-2014, 08:02 AM by StvOchi. )
(08-28-2014, 07:26 AM)hovatek Wrote: Please, give a brief summary of what happened to the phone
I installed chainfire 3d on my rooted phone which made my phone stuck after the tecno animation logo. i tried installing cw recovery using mtk droid tools but that made it stuck at the 1st tecno logo when switching on the phone. So I used sp flash tool and flashed a preloade.bin I downloaded from this site and now when i try to flash the other files is what i'm unable to do. Now when i press the on button the phones only vibrates.
Reply
(08-28-2014, 07:37 AM)StvOchi Wrote: I installed chainfire 3d on my rooted phone which made my phone stuck after the tecno animation logo. i tried installing cw recovery using mtk droid tools but that made it stuck at the 1st tecno logo when switching on the phone. So I used sp flash tool and flashed a preloade.bin I downloaded from this site and now when i try to flash the other files is what i'm unable to do. Now when i press the on button the phones only vibrates.

Apparently, your second move was wrong. It had nothing to do with preloader.bin , only system.img . This shouldn't be much of a problem. Whats the phone model?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
(08-28-2014, 10:52 AM)hovatek Wrote:
(08-28-2014, 07:37 AM)StvOchi Wrote: I installed chainfire 3d on my rooted phone which made my phone stuck after the tecno animation logo. i tried installing cw recovery using mtk droid tools but that made it stuck at the 1st tecno logo when switching on the phone. So I used sp flash tool and flashed a preloade.bin I downloaded from this site and now when i try to flash the other files is what i'm unable to do. Now when i press the on button the phones only vibrates.

Apparently, your second move was wrong. It had nothing to do with preloader.bin , only system.img . This shouldn't be much of a problem. Whats the phone model?

Tecno M3

Reply
(This post was last modified: 08-28-2014, 04:12 PM by mboy13. )
Wen i instal d
mtk driva, it also says instald bt may nt
be able to work corectly. Thirdly, even
wen i wnt 4mat, i got same ero. Nd nw
self d fone refus 2 boot half way again. It
wil only vibrate. Plz help me o

as i sucesfuly flashd in recovery.img, preloader.bin, uboot.bin, nd d fone even refuse to boot into cwn recovery mood. If i on d fone, it wil jst vibrat 4 tymz. Even refuse to show d blue led light wen chagn. Ma fone Tecno Q1
Warm regards

[Image: https://encrypted-tbn1.gstatic.com/image...72etIkltxY]
Prof Mboy (Mboy13)
Network Engineer
CTTL, Contec Global
Birnin Kebbi,
Kebbi State

08140421345
08155755282

Reply
(08-28-2014, 03:55 PM)StvOchi Wrote: Tecno M3

Do you have the complete MTK backup for m3 there?
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)