Hovatek Forum MOBILE Android [Tutorial] How to revive a totally dead Mediatek device
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Tutorial] How to revive a totally dead Mediatek device

[Tutorial] How to revive a totally dead Mediatek device

Pages (41): Previous 117 18 19 20 2141 Next
hovatek
hovatek
hovatek
Administrator
49,570
22-08-2014, 11:09 PM



what do you mean by "then the phone goes to charging with a green circle."

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
jarek02
jarek02
jarek02
Newbie
4
22-08-2014, 11:19 PM
(22-08-2014, 11:09 PM)hovatek what do you mean by "then the phone goes to charging with a green circle."

The normal battery icon for charging. It stays there for some time then the phone reboots but no tecno logo comes. It reboots again to the battery icon and the process repeats itself.
This post was last modified: 22-08-2014, 11:20 PM by jarek02.
hovatek
hovatek
hovatek
Administrator
49,570
23-08-2014, 12:37 AM
what exactly is wrong with the phone and how did it get bricked?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
jarek02
jarek02
jarek02
Newbie
4
23-08-2014, 06:30 AM
(23-08-2014, 12:37 AM)hovatek what exactly is wrong with the phone and how did it get bricked?

It is aTecno P5S. It was bootlooped. I tried to reflss its files using sp flash tool then it got worse.
hovatek
hovatek
hovatek
Administrator
49,570
23-08-2014, 08:36 AM



Tecno P5S or P5? Please, confirm this information

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
StvOchi
StvOchi
StvOchi
Junior Member
17
24-08-2014, 01:25 PM
Hi. When i used sp flash tool to upload the preloader.bin file my tecno m3, now my phone only vibrates when i press the power button but the screen shows nothing. Now when i plug it to my comp to flash other files, my comp reads the drivers as mtk usb port instead of mtk preloader usb port which makes it impossible to flash the other files. Please help.
X3non
X3non
X3non
Recognized Contributor
22,062
24-08-2014, 01:59 PM
(24-08-2014, 01:25 PM)StvOchi Hi. When i used sp flash tool to upload the preloader.bin file my tecno m3, now my phone only vibrates when i press the power button but the screen shows nothing. Now when i plug it to my comp to flash other files, my comp reads the drivers as mtk usb port instead of mtk preloader usb port which makes it impossible to flash the other files. Please help.

You installed mtk usb port instead of the preloader usb port

Тσ fix this u have тσ reinstall the driver again

1. Download MediaTek USB VCOM drivers
2. In Windows, go to Control Panel and open Device
Manager
3. Click any of the device groups you see there From
Action menu, select Add legacy hardware
4. Add hardware wizard will be opened, click next
5. Select Install the hardware that I manually select
from a list (Advanced)
6. Click next two times and click Have Disk button
7. Click browse and find where your driver's .inf file is,
then select it (the .inf you'll select is located in drivers
> USB Vcom driver > your OS) . Ensure to select the 64
bit .inf if your PC is 64 bit
8. Click Open and OK. You will see the drivers listed.
9. Select your driver there (select MEDIATEK PRELOADER USB VCOM PORT)
10. Click Next and finish installing.

N/B ..number 9 is very important ..that's where most pple do make mistake when installing this driver

Best тσ тσ this when the fne isn't connected тσ the pc

Source: How тσ manually install MT65xx (MediaTek) USB VCOM drivers on Windows

If you still have problems ..you might want тσ read How to easily install MTK drivers for your exact phone model on PC
This post was last modified: 24-08-2014, 02:05 PM by X3non.
hovatek
hovatek
hovatek
Administrator
49,570
24-08-2014, 05:05 PM
(24-08-2014, 01:25 PM)StvOchi Hi. When i used sp flash tool to upload the preloader.bin file my tecno m3, now my phone only vibrates when i press the power button but the screen shows nothing. Now when i plug it to my comp to flash other files, my comp reads the drivers as mtk usb port instead of mtk preloader usb port which makes it impossible to flash the other files. Please help.

Just do as X3non instructed. Question for you, could you list all the files in your MTK backup? wanna be sure you have all needed files

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
StvOchi
StvOchi
StvOchi
Junior Member
17
25-08-2014, 12:12 PM
(24-08-2014, 05:05 PM)hovatek
(24-08-2014, 01:25 PM)StvOchi Hi. When i used sp flash tool to upload the preloader.bin file my tecno m3, now my phone only vibrates when i press the power button but the screen shows nothing. Now when i plug it to my comp to flash other files, my comp reads the drivers as mtk usb port instead of mtk preloader usb port which makes it impossible to flash the other files. Please help.

Just do as X3non instructed. Question for you, could you list all the files in your MTK backup? wanna be sure you have all needed files

Still no change. Please help me.
hovatek
hovatek
hovatek
Administrator
49,570
25-08-2014, 12:46 PM



(25-08-2014, 12:12 PM)StvOchi Still no change. Please help me.

1. List the files in your backup folder
2. what does SP flash tool show when you try flashing files

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (41): Previous 117 18 19 20 2141 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram