Hovatek Forum DEVELOPMENT Android ROOT TECNO P9O4 [DROIDPAD 10D]....HOW?
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


ROOT TECNO P9O4 [DROIDPAD 10D]....HOW?

ROOT TECNO P9O4 [DROIDPAD 10D]....HOW?

Pages (2): Previous 1 2
xerxes
xerxes
xerxes
Senior Member
8,355
11-05-2020, 11:31 PM
#11



(11-05-2020, 10:17 PM)IMMORTAL Also please the template.ini file for wwr tool that adds new chipsets to the application doesn't contain my chipset MT8753B Huh Exclamation
Any help in ways to add it to the template.ini? Huh


Simply edit the template.ini and add the chipset or backup using miracle thunder @ https://www.hovatek.com/forum/thread-15700.html to backup your phone’s firmware.
If miracle box 2.82 keeps crashing use a windows 7 pc.
This post was last modified: 12-05-2020, 09:33 AM by X3non.
IMMORTAL
IMMORTAL
IMMORTAL
Enthusiastic Member
10
15-05-2020, 03:55 PM
#12
(11-05-2020, 11:31 PM)innagee
(11-05-2020, 10:17 PM)IMMORTAL Also please the template.ini file for wwr tool that adds new chipsets to the application doesn't contain my chipset MT8753B Huh Exclamation
Any help in ways to add it to the template.ini? Huh


Simply edit the template.ini and add the chipset or backup using miracle thunder @ https://www.hovatek.com/forum/thread-15700.html to backup your phone’s firmware.
If miracle box 2.82 keeps crashing use a windows 7 pc.
Thanks for your correct reply, 
However, after adding the chipset, the scatter file was created by wwr but SP Flash Tool version 5.19..... doesn't support MT87.....and above chipsets,
Also, Miracle box V2.82 when I tried FULL ROM readback started reading but showed SM ERR (error) and stopped after reading just 59MB, I had to disconnect as the .bin file size didn't increase for a very long time, this bricked my phone, but I started it after the normal continuous charging,

So, please what SP Flash tool version is MT87...... compatible? and any advice on how to get around the Miracle box SM..ERR(error)?

Thanks
X3non
X3non
X3non
Recognized Contributor
22,062
16-05-2020, 09:58 AM
#13
(15-05-2020, 03:55 PM)IMMORTAL
(11-05-2020, 11:31 PM)innagee
(11-05-2020, 10:17 PM)IMMORTAL Also please the template.ini file for wwr tool that adds new chipsets to the application doesn't contain my chipset MT8753B Huh Exclamation
Any help in ways to add it to the template.ini? Huh


Simply edit the template.ini and add the chipset or backup using miracle thunder @ https://www.hovatek.com/forum/thread-15700.html to backup your phone’s firmware.
If miracle box 2.82 keeps crashing use a windows 7 pc.
Thanks for your correct reply, 
However, after adding the chipset, the scatter file was created by wwr but SP Flash Tool version 5.19..... doesn't support MT87.....and above chipsets,
Also, Miracle box V2.82 when I tried FULL ROM readback started reading but showed SM ERR (error) and stopped after reading just 59MB, I had to disconnect as the .bin file size didn't increase for a very long time, this bricked my phone, but I started it after the normal continuous charging,

So, please what SP Flash tool version is MT87...... compatible? and any advice on how to get around the Miracle box SM..ERR(error)?

Thanks

for spft + wwr, use the scatter file for P904-PA05A-N-180227V47 @ https://www.hovatek.com/forum/thread-24421.html as your empty scatter file for reading back preloader and pgpt

for miracle thunder, backup as scatter file and untick the boxes for userdata and cache before proceeding with the backup
IMMORTAL
IMMORTAL
IMMORTAL
Enthusiastic Member
10
16-05-2020, 07:43 PM
#14
(16-05-2020, 09:58 AM)X3non
(15-05-2020, 03:55 PM)IMMORTAL
(11-05-2020, 11:31 PM)innagee
(11-05-2020, 10:17 PM)IMMORTAL Also please the template.ini file for wwr tool that adds new chipsets to the application doesn't contain my chipset MT8753B Huh Exclamation
Any help in ways to add it to the template.ini? Huh


Simply edit the template.ini and add the chipset or backup using miracle thunder @ https://www.hovatek.com/forum/thread-15700.html to backup your phone’s firmware.
If miracle box 2.82 keeps crashing use a windows 7 pc.
Thanks for your correct reply, 
However, after adding the chipset, the scatter file was created by wwr but SP Flash Tool version 5.19..... doesn't support MT87.....and above chipsets,
Also, Miracle box V2.82 when I tried FULL ROM readback started reading but showed SM ERR (error) and stopped after reading just 59MB, I had to disconnect as the .bin file size didn't increase for a very long time, this bricked my phone, but I started it after the normal continuous charging,

So, please what SP Flash tool version is MT87...... compatible? and any advice on how to get around the Miracle box SM..ERR(error)?

Thanks

for spft + wwr, use the scatter file for P904-PA05A-N-180227V47 @ https://www.hovatek.com/forum/thread-24421.html as your empty scatter file for reading back preloader and pgpt

for miracle thunder, backup as scatter file and untick the boxes for userdata and cache before proceeding with the backup
I want to use this opportunity to thank the Almighty God for blessing us with all these knowledge, I appreciate everyone who has contributed his/her knowledge in supporting me in my quest to root my Tecno P904 (MT8735B). I accomplished my aspiration today. Thanks, I finally rooted it.
Attached Files
.png
Screenshot_20200516-191547.png
Size: 165.71 KB / Downloads: 5
Pages (2): Previous 1 2
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram