[Please help] Tecno NX stuck on bootloop then dead
[Please help] Tecno NX stuck on bootloop then dead
(30-07-2019, 12:04 PM)X3non loosen the back cover to get access to the battery or find someone who can then disconnect / reconnect the battery and leave the phone to chargeI've flashed successfully those file one by one so far: boot.img, recovery.img, userdata.img and cache.img.
(30-07-2019, 03:39 PM)X3nonHello(30-07-2019, 12:24 PM)RMT ...
perform the instructions you've been asked to before jumping into try random things out or you might end up worsening the condition of the phone
(31-07-2019, 10:41 AM)RMT ...
Even trying to flash system.img again using sp flash tool has failed (at 39%) due to automatic disconnection from the phone, again.
RMT
(31-07-2019, 02:26 PM)X3nonBefore I go ahead, please I have some questions:(31-07-2019, 10:41 AM)RMT ...
Even trying to flash system.img again using sp flash tool has failed (at 39%) due to automatic disconnection from the phone, again.
RMT
try flashing the entire contents of the factory firmware and try using a different USB cable or USB port or PC and or place the phone on a stationary place to avoid disconnection while flashing
(31-07-2019, 03:00 PM)RMT Before I go ahead, please I have some questions:
Because I don't know how long my phone can keep connected for the whole flashing:
Can I flash the files one by one, like in ordered list (from lk to system)? AND should I flash preloader too? Cause if sp flash failed it may be hard bricked forever! Even if I flash it separately, as I suggest before.
Thanks for answering
RMT
(31-07-2019, 06:21 PM)X3nonHello,(31-07-2019, 03:00 PM)RMT Before I go ahead, please I have some questions:
Because I don't know how long my phone can keep connected for the whole flashing:
Can I flash the files one by one, like in ordered list (from lk to system)? AND should I flash preloader too? Cause if sp flash failed it may be hard bricked forever! Even if I flash it separately, as I suggest before.
Thanks for answering
RMT
flash everything including preloader and yes you can choose to flash one after the other starting with preloader
(01-08-2019, 02:20 PM)RMT ...
Note that the difference between "download only" and "firmware upgrade" is that "firmware upgrade" format the phone before flashing the files. Maybe that particular thing solved my issue?
Anyway because I know that I shouldn't format a device with secure boot enabled, I have a final question:
Is my DA still working after what I've done? Because I suspect the format method a bit similar to the format tab, or isn't it?
Finally, I want to thank you all for helping and guide me through this problem, now I can sleep well tonight
RMT