[Please help] TECNO L9 PLUS JUST WENT DEAD
[Please help] TECNO L9 PLUS JUST WENT DEAD
(30-07-2019, 07:23 AM)finnest Hi. I'll really appreciate an help on my tecno L9 plus.
...Can anyone kindly be of help by posting the sp flash tool firmware with scatter file for me to try or help me with a way forward with miracle box?
(30-07-2019, 12:30 PM)X3nonThanks for your response. I have read a post on that earlier and I have disconnected, reconnected and charged over 2days now (overnight charging). Nothing changed(30-07-2019, 07:23 AM)finnest Hi. I'll really appreciate an help on my tecno L9 plus.
...Can anyone kindly be of help by posting the sp flash tool firmware with scatter file for me to try or help me with a way forward with miracle box?
before you attempt to flash firmware, loosen the back cover to get to the battery then disconnect / reconnect the battery of the phone then allow to charge for several hours
lets know if the phone still remains dead or not
(31-07-2019, 06:05 AM)Raopiplus First of all Don't Panic. Your phone is fine. It has entered meta-mode.
You can do either of two things to bring it back to life.
One hold volume+ button and connect to pc. Then it will say phone is in meta mode. long press power to reboot. do it and you get back your phone
Else wait till battery is fully discharged. Then connect it to PC. with viacom preload drivers it will be recognised and then you can reload firmware.
Let me know how it goes
(31-07-2019, 06:13 AM)RaopiplusThanks for your response, the issue now is how I can discharge a 100% full battery. Do you have an idea how I can do that?(31-07-2019, 06:05 AM)Raopiplus First of all Don't Panic. Your phone is fine. It has entered meta-mode.
You can do either of two things to bring it back to life.
One hold volume+ button and connect to pc. Then it will say phone is in meta mode. long press power to reboot. do it and you get back your phone
Else wait till battery is fully discharged. Then connect it to PC. with viacom preload drivers it will be recognised and then you can reload firmware.
Let me know how it goes
(31-07-2019, 10:39 AM)finnest Thanks for your response, the issue now is how I can discharge a 100% full battery. Do you have an idea how I can do that?