[Please help] TECNO CF7K DEAD
[Please help] TECNO CF7K DEAD
(30-07-2019, 01:20 PM)umfah PLS I NEED HELP, MY TECNO CF7K DEAD AFTER FLASHING .
>>WITH THIS FIRMWARE AND TOOL
Tecno Camon 11 CF7k (CF7k-H612L-O-181012V115) [Factory / Signed]
SoftwareDownload V4.1901.23.17_for_AfterSales
>>INNITIALLY PHONE WAS SHOWING UNFURTUNATELY FACEBOOK,GMAIL...HAS STOPED
>>AND I COULDNT RECALL THE PHONE ORIGINAL BUILED NUMBER
(30-07-2019, 10:14 PM)umfah(30-07-2019, 04:34 PM)umfah yes flashing finished successifulTry loosing and disconnecting/reconnecting the phone's battery then power on or connect to a charger for a few hours then switch on the phone.
i have done all that. is like the preloader got erased
innageeWhich box do you think i can use to dump firmware from a working one.umfahumfah yes flashing finished successifulTry loosing and disconnecting/reconnecting the phone's battery then power on or connect to a charger for a few hours then switch on the phone.
i have done all that. is like the preloader got erased
You will need to look for a different build firmware and it seems is only the v155 build is available online.
Have you charged the battery after reconnecting?
(30-07-2019, 10:14 PM)umfah i have done all that. is like the preloader got erased
(31-07-2019, 09:46 AM)umfah ...nck did it but cannot write it.
(31-07-2019, 01:31 PM)X3nonlook at the file i dump(30-07-2019, 10:14 PM)umfah i have done all that. is like the preloader got erased
preloader can't be erased when you just mentioned that you flashed firmware successfully
for confirmation, you've disconnected / reconnected the battery after flashing the said firmware?
(31-07-2019, 09:46 AM)umfah ...nck did it but cannot write it.
doubt you'll be able to flash non -sign or -verified files on this model
whats the build number of the phone you took the backup from?
try using sp flash tool to flash this backup and post feedback and screenshot of error message if any error