Hovatek Forum MOBILE Android [Please help] Sim not detected after flashing new ROM on my Infinix zero 16gb X506
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Sim not detected after flashing new ROM on my Infinix zero 16gb X506

[Please help] Sim not detected after flashing new ROM on my Infinix zero 16gb X506

Pages (6): Previous 1 2 3 4 5 6 Next
daddyclems
daddyclems
daddyclems
Junior Member
28
28-04-2015, 02:04 PM
#11



OK, I ll give it a try, note=the current ROM on this dead device is not its original ROM, its d lollipop ROM I flashed before having invalid imei/baseband issue, d one am about flashing now is the flash file I backed up from a friend's phone using mtkdroid, hope it will still work out smoothly or I need to format d previous lollipop ROM before reflashing the backed up file..
hovatek
hovatek
hovatek
Administrator
49,570
28-04-2015, 05:12 PM
#12
(28-04-2015, 02:04 PM)daddyclems OK, I ll give it a try, note=the current ROM on this dead device is not its original ROM, its d lollipop ROM I flashed before having invalid imei/baseband issue, d one am about flashing now is the flash file I backed up from a friend's phone using mtkdroid, hope it will still work out smoothly or I need to format d previous lollipop ROM before reflashing the backed up file..

no need to format. just flash the files (except preloader.bin). seems the ROM has a network bug. many other zero users have had the same issue

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
daddyclems
daddyclems
daddyclems
Junior Member
28
28-04-2015, 08:40 PM
#13
Thanks, I got this error msg BROM ERROR:S_FT_ENABLE_DRAM_FAIL(4032) please check your load matches to your target which is to be downloaded.
hovatek
hovatek
hovatek
Administrator
49,570
28-04-2015, 09:16 PM
#14
(28-04-2015, 08:40 PM)daddyclems Thanks, I got this error msg BROM ERROR:S_FT_ENABLE_DRAM_FAIL(4032) please check your load matches to your target which is to be downloaded.

thats probably the j608/J609 issue

check the baseband (settings > about > baseband) on the phone you backed up and let me know if it says J608 or J609

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
daddyclems
daddyclems
daddyclems
Junior Member
28
28-04-2015, 09:56 PM
#15



OK, its j608
daddyclems
daddyclems
daddyclems
Junior Member
28
29-04-2015, 09:03 AM
#16
Morning Mr.Hovatek
So what next will I do now?
hovatek
hovatek
hovatek
Administrator
49,570
29-04-2015, 12:27 PM
#17
(29-04-2015, 09:03 AM)daddyclems Morning Mr.Hovatek
So what next will I do now?

download the J609 replacement files @ https://www.hovatek.com/forum/thread-533.html then copy them all into the infnix zero j608 backup folder (replace if prompted) then try flashing again

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
daddyclems
daddyclems
daddyclems
Junior Member
28
29-04-2015, 04:27 PM
#18
Thanks,did as instructed, i downloaded the j609 replacement file and replaced the files inside d j608 folder and flashed it without checking preloader, every other thing was checked aside cache nd usrdata,,the red bar ran 100% the yellow too ran 100% nd the green circle popped up with a success msg asking me to click OK,i did,removed usb from my phone and tried powering it on but its still not powering...
hovatek
hovatek
hovatek
Administrator
49,570
29-04-2015, 05:27 PM
#19
(29-04-2015, 04:27 PM)daddyclems Thanks,did as instructed, i downloaded the j609 replacement file and replaced the files inside d j608 folder and flashed it without checking preloader, every other thing was checked aside cache nd usrdata,,the red bar ran 100% the yellow too ran 100% nd the green circle popped up with a success msg asking me to click OK,i did,removed usb from my phone and tried powering it on but its still not powering...

you were supposed to flash preloader.bin too.  No way its coming up without that. do that.....

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
daddyclems
daddyclems
daddyclems
Junior Member
28
29-04-2015, 06:26 PM
#20



OK, so now will I still flash the whole files again or just preloader.bin alone?
Pages (6): Previous 1 2 3 4 5 6 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram