Tecno Y2 completely dead after flashing
Tecno Y2 completely dead after flashing
(08-08-2019, 10:02 AM)bokkojr Hello guys I really need your help. I tried flashing Tecno Y2 phone yesterday night but it went completely dead not turning on not charging not even vibrating. I had installed all the drivers prior to flashing but had forgotten to check the battery percentage as I carried on. Drivers I used (MTK_USB_All_v1.0.8) (MT65xx USB VCOM DRIVERS) (android_cdc_driver). The back plate of the tecno says Y2 8+512 A3 but i dont know its build number. I used Y2-H721-B2-KK-EG-20160707. From then on ive been getting Error 4032 DRAM FAILED please help ill be grateful.
(08-08-2019, 01:13 PM)X3nongreetings xenon. no it just showed the red bar progress at 100% then gave me a a different error. I used sp flash tools "Format all + download" option. Thats when the phone went silent. When I remove the battery, hold power down and plug usb into the computer Meta mode is available apart from that I cant do anything else in my knowledge. let me download that firmware as you keep on assisting thanks(08-08-2019, 10:02 AM)bokkojr Hello guys I really need your help. I tried flashing Tecno Y2 phone yesterday night but it went completely dead not turning on not charging not even vibrating. I had installed all the drivers prior to flashing but had forgotten to check the battery percentage as I carried on. Drivers I used (MTK_USB_All_v1.0.8) (MT65xx USB VCOM DRIVERS) (android_cdc_driver). The back plate of the tecno says Y2 8+512 A3 but i dont know its build number. I used Y2-H721-B2-KK-EG-20160707. From then on ive been getting Error 4032 DRAM FAILED please help ill be grateful.
was flashing successful with a green tick?
download and try flashing this firmware build Y2-H721A3-KK-180207V24 @ https://www.hovatek.com/forum/thread-311.html
(08-08-2019, 01:13 PM)X3nonxenon thanks alot bro your firmware was everything its operating all normal at a 100 percent. you are a life saver(08-08-2019, 10:02 AM)bokkojr Hello guys I really need your help. I tried flashing Tecno Y2 phone yesterday night but it went completely dead not turning on not charging not even vibrating. I had installed all the drivers prior to flashing but had forgotten to check the battery percentage as I carried on. Drivers I used (MTK_USB_All_v1.0.8) (MT65xx USB VCOM DRIVERS) (android_cdc_driver). The back plate of the tecno says Y2 8+512 A3 but i dont know its build number. I used Y2-H721-B2-KK-EG-20160707. From then on ive been getting Error 4032 DRAM FAILED please help ill be grateful.
was flashing successful with a green tick?
download and try flashing this firmware build Y2-H721A3-KK-180207V24 @ https://www.hovatek.com/forum/thread-311.html