Hovatek Forum MOBILE Android Tecno Y2 completely dead after flashing
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Tecno Y2 completely dead after flashing

Tecno Y2 completely dead after flashing

bokkojr
bokkojr
bokkojr
Newbie
3
08-08-2019, 10:02 AM
#1



Hello guys I really need your help. I tried flashing Tecno Y2 phone yesterday night but it went completely dead not turning on not charging not even vibrating. I had installed all the drivers prior to flashing but had forgotten to check the battery percentage as I carried on. Drivers I used (MTK_USB_All_v1.0.8) (MT65xx USB VCOM DRIVERS) (android_cdc_driver). The back plate of the tecno says Y2 8+512 A3 but i dont know its build number. I used Y2-H721-B2-KK-EG-20160707. From then on ive been getting Error 4032 DRAM FAILED please help ill be grateful.
This post was last modified: 08-08-2019, 10:05 AM by bokkojr.
X3non
X3non
X3non
Recognized Contributor
22,062
08-08-2019, 01:13 PM
#2
(08-08-2019, 10:02 AM)bokkojr Hello guys I really need your help. I tried flashing Tecno Y2 phone yesterday night but it went completely dead not turning on not charging not even vibrating. I had installed all the drivers prior to flashing but had forgotten to check the battery percentage as I carried on. Drivers I used (MTK_USB_All_v1.0.8) (MT65xx USB VCOM DRIVERS) (android_cdc_driver). The back plate of the tecno says Y2 8+512 A3 but i dont know its build number. I used Y2-H721-B2-KK-EG-20160707. From then on ive been getting Error 4032 DRAM FAILED please help ill be grateful.

was flashing successful with a green tick?
download and try flashing this firmware build Y2-H721A3-KK-180207V24 @ https://www.hovatek.com/forum/thread-311.html
This post was last modified: 08-08-2019, 05:52 PM by X3non.
bokkojr
bokkojr
bokkojr
Newbie
3
08-08-2019, 03:01 PM
#3
(08-08-2019, 01:13 PM)X3non
(08-08-2019, 10:02 AM)bokkojr Hello guys I really need your help. I tried flashing Tecno Y2 phone yesterday night but it went completely dead not turning on not charging not even vibrating. I had installed all the drivers prior to flashing but had forgotten to check the battery percentage as I carried on. Drivers I used (MTK_USB_All_v1.0.8) (MT65xx USB VCOM DRIVERS) (android_cdc_driver). The back plate of the tecno says Y2 8+512 A3 but i dont know its build number. I used Y2-H721-B2-KK-EG-20160707. From then on ive been getting Error 4032 DRAM FAILED please help ill be grateful.

was flashing successful with a green tick?
download and try flashing this firmware build Y2-H721A3-KK-180207V24 @ https://www.hovatek.com/forum/thread-311.html
greetings xenon. no it just showed the red bar progress at 100% then gave me a a different error. I used sp flash tools "Format all + download" option. Thats when the phone went silent. When I remove the battery, hold power down and plug usb into the computer Meta mode is available apart from that I cant do anything else in my knowledge. let me download that firmware as you keep on assisting thanks

I removed the battery, load the scatter file from Y2-H721A3-KK-180207V24 chose download mode and unticked all the checkboxes except from preloader held the volume down button then downloaded and got a qreen "ok" button. The reason why I flashed preloader only because i dont know the battery percentage since the phone isn't powering on. How can I find out my batt percentage so that I try full download.?
This post was last modified: 08-08-2019, 05:52 PM by X3non.
bokkojr
bokkojr
bokkojr
Newbie
3
08-08-2019, 05:26 PM
#4
(08-08-2019, 01:13 PM)X3non
(08-08-2019, 10:02 AM)bokkojr Hello guys I really need your help. I tried flashing Tecno Y2 phone yesterday night but it went completely dead not turning on not charging not even vibrating. I had installed all the drivers prior to flashing but had forgotten to check the battery percentage as I carried on. Drivers I used (MTK_USB_All_v1.0.8) (MT65xx USB VCOM DRIVERS) (android_cdc_driver). The back plate of the tecno says Y2 8+512 A3 but i dont know its build number. I used Y2-H721-B2-KK-EG-20160707. From then on ive been getting Error 4032 DRAM FAILED please help ill be grateful.

was flashing successful with a green tick?
download and try flashing this firmware build Y2-H721A3-KK-180207V24 @ https://www.hovatek.com/forum/thread-311.html
xenon thanks alot bro your firmware was everything its operating all normal at  a 100 percent. you are a life saver
This post was last modified: 08-08-2019, 05:52 PM by X3non.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram