Hovatek Forum MOBILE Android Hot 8 X650B Firmware Required
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Hot 8 X650B Firmware Required

Hot 8 X650B Firmware Required

Pages (2): 1 2 Next
Hamzajaan2692017
Hamzajaan2692017
Hamzajaan2692017
Junior Member
26
28-10-2019, 08:06 PM
#1



Please someone give me firmware of Hot 8 X650B
Aniugchukwu
Aniugchukwu
Aniugchukwu
Senior Member
236
28-10-2019, 09:07 PM
#2
What is wrong with your device and why do you intend flashing it.

Sent from my itel A15 using Hovatek Mobile
Hamzajaan2692017
Hamzajaan2692017
Hamzajaan2692017
Junior Member
26
28-10-2019, 09:53 PM
#3
Hard bricked buddy

Sent from my TA-1032 using Hovatek Mobile
Aniugchukwu
Aniugchukwu
Aniugchukwu
Senior Member
236
28-10-2019, 10:05 PM
#4
Did you flash it before it hard or how did it happen

Sent from my itel A15 using Hovatek Mobile
freshtyt
freshtyt
freshtyt
Senior Member
2,949
29-10-2019, 10:30 AM
#5



(28-10-2019, 09:53 PM)Hamzajaan2692017 Hard bricked buddy

Sent from my TA-1032 using Hovatek Mobile

by hard bricked, you probably mean device is totally dead
how did the device get hard bricked? full details, maybe the phone might not require flashing
btw i found firmware on this website @ https://support.halabtech.com/index.php?...r&id=67439 it's not free
This post was last modified: 29-10-2019, 10:31 AM by freshtyt.
Hamzajaan2692017
Hamzajaan2692017
Hamzajaan2692017
Junior Member
26
29-10-2019, 11:45 AM
#6
(29-10-2019, 10:30 AM)freshtyt
(28-10-2019, 09:53 PM)Hamzajaan2692017
Hard bricked buddy

Sent from my TA-1032 using Hovatek Mobile


by hard bricked, you probably mean device is totally dead
how did the device get hard bricked? full details, maybe the phone might not require flashing
btw i found firmware on this website @ https://support.halabtech.com/index.php?...p;id=67439 it's not free



I was trying to achieve temprory root like i did on smart 3 plus by patching recovery and flashing in fastboot mode, but it went into bootloop instead, then i tried to find firmware for it but it's not there yet,so i achieve readback and flashed stock recovery by spft and things gone worse it was now showing red state and asking to flash stock boot did that too but no luck...then finally i loaded readback on spft and flash with firmware upgrade flashing stuck on md1 and phone is dead

Sent from my TA-1032 using Hovatek Mobile


Sent from my TA-1032 using Hovatek Mobile
xerxes
xerxes
xerxes
Senior Member
8,355
29-10-2019, 06:59 PM
#7
(29-10-2019, 11:45 AM)Hamzajaan2692017
(29-10-2019, 10:30 AM)freshtyt
(28-10-2019, 09:53 PM)Hamzajaan2692017 Hard bricked buddy

Sent from my TA-1032 using Hovatek Mobile

by hard bricked, you probably mean device is totally dead
how did the device get hard bricked? full details, maybe the phone might not require flashing
btw i found firmware on this website @ https://support.halabtech.com/index.php?...p;id=67439 it's not free



I was trying to achieve temprory root like i did on smart 3 plus by patching recovery and flashing in fastboot mode, but it went into bootloop instead, then i tried to find firmware for it but it's not there yet,so i achieve readback and flashed stock recovery by spft and things gone worse it was now showing red state and asking to flash stock boot did that too but no luck...then finally i loaded readback on spft and flash with firmware upgrade flashing stuck on md1 and phone is dead

Sent from my TA-1032 using Hovatek Mobile


Sent from my TA-1032 using Hovatek Mobile

Sound like you’ve formatted phone’s bootloader since you have selected firmware upgrade option.
Try disconnecting/reconnecting the phone’s battery then charge for few hours before power on if problem persist then retry flashing the readback, though the readback would not do much help because is not signed, what you need is a signed firmware. You can check the link @freshtyt's reply.
This post was last modified: 30-10-2019, 09:47 AM by X3non.
freshtyt
freshtyt
freshtyt
Senior Member
2,949
30-10-2019, 09:52 AM
#8
(29-10-2019, 11:45 AM)Hamzajaan2692017 I was trying to achieve temprory root like i did on smart 3 plus by patching recovery and flashing in fastboot mode, but it went into bootloop instead, then i tried to find firmware for it but it's not there yet,so i achieve readback and flashed stock recovery by spft and things gone worse it was now showing red state and asking to flash stock boot did that too but no luck...then finally i loaded readback on spft and flash with firmware upgrade flashing stuck on md1 and phone is dead

Sent from my TA-1032 using Hovatek Mobile

3 options you have, either buy the firmware found online or take your device to carlcare or wait till firmware shows up somewhere online free
Hamzajaan2692017
Hamzajaan2692017
Hamzajaan2692017
Junior Member
26
30-10-2019, 02:41 PM
#9
Tried flashing readback many times it always fail at md1img,also tried battery trick and charging for hours,and regarding online paid firmware they ask to buy package which the lowest is at 19 USD thats a lot of money,and at ifinedhub.com they are offering firmware at 3 USD but they accept payment via PayPal only and here in Pakistan there's no PayPal so m stuck...
X3non
X3non
X3non
Recognized Contributor
22,062
30-10-2019, 04:51 PM
#10



(30-10-2019, 02:41 PM)Hamzajaan2692017 Tried flashing readback many times it always fail at md1img,also tried battery trick and charging for hours,and regarding online paid firmware they ask to buy package which the lowest is at 19 USD thats a lot of money,and at ifinedhub.com they are offering firmware at 3 USD but they accept payment via PayPal only and here in Pakistan there's no PayPal so m stuck...

attach a full screenshot showing all the contents of your backup
try flashing all the items from your readback one after the other, then list all the items that were unable to flash
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram