Hovatek Forum MOBILE Android Tecno C9 not reading second sim
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Tecno C9 not reading second sim

Tecno C9 not reading second sim

BaabaFadil
BaabaFadil
BaabaFadil
Techie Member
73
29-10-2019, 07:17 AM
#1



Tecno C9-H535B1-M-160901V46, Android version 6, HiOS Version 1.1.0.
Only 1 simcard can work is either sim slot yet in simcard settings both are enabled.

Sent from my TECNO-C9 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
29-10-2019, 10:42 AM
#2
(29-10-2019, 07:17 AM)BaabaFadil Tecno C9-H535B1-M-160901V46, Android version 6, HiOS Version 1.1.0.
Only 1 simcard can work is either sim slot yet in simcard settings both are enabled.

Sent from my TECNO-C9 using Hovatek Mobile

how did this problem start?
have you tried factory resetting the phone? or flashing firmware?
BaabaFadil
BaabaFadil
BaabaFadil
Techie Member
73
29-10-2019, 01:14 PM
#3
(29-10-2019, 10:42 AM)X3non
(29-10-2019, 07:17 AM)BaabaFadil
Tecno C9-H535B1-M-160901V46, Android version 6, HiOS Version 1.1.0.
Only 1 simcard can work is either sim slot yet in simcard settings both are enabled.

Sent from my TECNO-C9 using Hovatek Mobile


how did this problem start?
have you tried factory resetting the phone? or flashing firmware?

I bought the phone from someone & he claims both slots were working.
I did a factory reset but the issue persists.
I haven't flashed firmware.

Sent from my TECNO-C9 using Hovatek Mobile
xerxes
xerxes
xerxes
Senior Member
8,355
29-10-2019, 08:31 PM
#4
(29-10-2019, 01:14 PM)BaabaFadil
(29-10-2019, 10:42 AM)X3non
(29-10-2019, 07:17 AM)BaabaFadil
Tecno C9-H535B1-M-160901V46, Android version 6, HiOS Version 1.1.0.
Only 1 simcard can work is either sim slot yet in simcard settings both are enabled.

Sent from my TECNO-C9 using Hovatek Mobile


how did this problem start?
have you tried factory resetting the phone? or flashing firmware?

I bought the phone from someone & he claims both slots were working.
I did a factory reset but the issue persists.
I haven't flashed firmware.

Sent from my TECNO-C9 using Hovatek Mobile

Is there network when you insert a sim card on the second slot and leave the first slot empty?
When you dial *#06#, how many IMEI is displayed? Two or one?
Also state the phone’s build no?l.
This post was last modified: 29-10-2019, 08:32 PM by xerxes.
BaabaFadil
BaabaFadil
BaabaFadil
Techie Member
73
30-10-2019, 06:46 AM
#5



Build Number is C9-H535B1-M-160901V46 though you didn't see it in my first message.
If i put only 1 simcard in slot 2 it works.
When i dial *#06# it shows both imei.
This post was last modified: 30-10-2019, 06:49 AM by BaabaFadil.
X3non
X3non
X3non
Recognized Contributor
22,062
30-10-2019, 10:13 AM
#6
(30-10-2019, 06:46 AM)BaabaFadil Build Number is C9-H535B1-M-160901V46 though you didn't see it in my first message.
If i put only 1 simcard in slot 2 it works.
When i dial *#06# it shows both imei.

try flashing the firmware @ https://mega.nz/#!8UZHTRgQ!WDhwcDtYsn_-v...8MHxlQvDOU
pwd: ShorbagyTeam
flash using the guide @ https://www.hovatek.com/forum/thread-13894.html
BaabaFadil
BaabaFadil
BaabaFadil
Techie Member
73
31-10-2019, 01:24 PM
#7
(30-10-2019, 10:13 AM)X3non
(30-10-2019, 06:46 AM)BaabaFadil Build Number is C9-H535B1-M-160901V46 though you didn't see it in my first message.
If i put only 1 simcard in slot 2 it works.
When i dial *#06# it shows both imei.

try flashing the firmware @ https://mega.nz/#!8UZHTRgQ!WDhwcDtYsn_-v...8MHxlQvDOU
pwd: ShorbagyTeam
flash using the guide @ https://www.hovatek.com/forum/thread-13894.html
I downloaded the firmware from the link above, made backup in both scatter & & followed the instructions from the second link to write to the phone but it failed, then i used the bin i had backedup & it completed well but when i tried to start the phone, it doesnt display anything even when i try to charge it, when i connect it to the computer, via device manager its on & off
BaabaFadil
BaabaFadil
BaabaFadil
Techie Member
73
31-10-2019, 03:22 PM
#8
(29-10-2019, 08:31 PM)innagee
(29-10-2019, 01:14 PM)BaabaFadil
(29-10-2019, 10:42 AM)X3non
(29-10-2019, 07:17 AM)BaabaFadil Tecno C9-H535B1-M-160901V46, Android version 6, HiOS Version 1.1.0.
Only 1 simcard can work is either sim slot yet in simcard settings both are enabled.

Sent from my TECNO-C9 using Hovatek Mobile

how did this problem start?
have you tried factory resetting the phone? or flashing firmware?

I bought the phone from someone & he claims both slots were working.
I did a factory reset but the issue persists.
I haven't flashed firmware.

Sent from my TECNO-C9 using Hovatek Mobile

Is there network when you insert a sim card on the second slot and leave the first slot empty?
When you dial *#06#, how many IMEI is displayed? Two or one?
Also state the phone’s build no?l.
I downloaded the firmware from the link provided by the Hovatek representative, made backup of phone firmware in both scatter & bin formats, followed the instructions from the second link to write to the phone but it failed, then i used the bin i had backed up & it completed well but when i tried to start the phone, it doesnt display anything even when i try to charge it, when i connect it to the computer, via device manager its on & off
X3non
X3non
X3non
Recognized Contributor
22,062
31-10-2019, 07:36 PM
#9
(31-10-2019, 01:24 PM)BaabaFadil I downloaded the firmware from the link above, made backup in both scatter & & followed the instructions from the second link to write to the phone but it failed, then i used the bin i had backedup & it completed well but when i tried to start the phone, it doesnt display anything even when i try to charge it, when i connect it to the computer, via device manager its on & off

disassemble the back cover then disconnect / reconnect the battery of the device, it should power on
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram