I happen to Format all my Tecno L8 Plus now It doesn't Power on
I happen to Format all my Tecno L8 Plus now It doesn't Power on
(09-11-2019, 03:09 PM)davidmalambika Hello, There.
I formatted my Tecno L8 Plus now it doesn't power on and i don't have the same Firmware Model what should I do. I tried all L8 Plus firmware listed on Hovatek but i could not Fixed it. is there a way to unbrick this problem
(09-11-2019, 06:27 PM)freshtytThe Previous Build Number was :L8-L8PLUS-H805-CE1-L-HiOS-20160707, all the firmware finished without an error but still i can't power on my device(09-11-2019, 03:09 PM)davidmalambika Hello, There.
I formatted my Tecno L8 Plus now it doesn't power on and i don't have the same Firmware Model what should I do. I tried all L8 Plus firmware listed on Hovatek but i could not Fixed it. is there a way to unbrick this problem
do you remember the previous build number of your device?
what was the outcome of the firmware you tried? where you able to flash any of them successfully or not? if you get error messages, upload full screenshots to https://imgur.com then post the link here
(09-11-2019, 11:54 PM)davidmalambika The Previous Build Number was :L8-L8PLUS-H805-CE1-L-HiOS-20160707, all the firmware finished without an error but still i can't power on my device
(10-11-2019, 11:12 PM)X3non(09-11-2019, 11:54 PM)davidmalambika The Previous Build Number was :L8-L8PLUS-H805-CE1-L-HiOS-20160707, all the firmware finished without an error but still i can't power on my device
reflash this particular build L8PLUS-H805-CE1-L-HiOS-20160616 then once successful, disconnect / reconnect the battery clip of the device (loosen the back cover to get to the battery or find someone who can) once the battery clip is connected, allow the phone to charge for a few hours then attempt to power it on
Is it okay to charge even though i can not see anything on screen that phone is on charging
(11-11-2019, 10:35 AM)davidmalambikaI reflash with that build number and it was successful, i disconnect and reconnect battery clip and charge it for couple of hours still the phone can't turn on. the flashing process below(11-11-2019, 09:53 AM)X3non(11-11-2019, 07:00 AM)davidmalambika Is it okay to charge even though i can not see anything on screen that phone is on charging
yes, but have you disconnected / reconnected the battery clip of the device ?
Yes i did disconnect and reconnect again
(11-11-2019, 11:55 AM)davidmalambika I reflash with that build number and it was successful, i disconnect and reconnect battery clip and charge it for couple of hours still the phone can't turn on. the flashing process below
Code:Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM4)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6580 SW:0000 Ver: CA00
Downloading Boot8 ...
EMMC Size: 0x03AB800000
Flash Type: EMMC
INT/EXT RAM Size: 0x20000/0x80000000
Writing(Nand/eMMC)...
Writing PGPT
Writing PROINFO
Writing NVRAM
Writing PROTECT1
Writing PROTECT2
Writing SECCFG
Writing LK
Writing BOOT
Writing RECOVERY
Writing PARA
Writing LOGO
Writing EXPDB
Writing FRP
Writing NVDATA
Writing METADATA
Writing OEMKEYSTORE
Writing SECRO
Writing KEYSTORE
Writing SYSTEM
Writing CACHE
Writing FLASHINFO
Checking Sum...
Write Done.
>>Total time: 8 mins 32 s
(11-11-2019, 05:51 PM)X3nonThis was the Reading before formatting all my phone(11-11-2019, 11:55 AM)davidmalambika I reflash with that build number and it was successful, i disconnect and reconnect battery clip and charge it for couple of hours still the phone can't turn on. the flashing process below
Code:Waiting for USB Port...
Set MediaTek PreLoader USB VCOM Port (COM4)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6580 SW:0000 Ver: CA00
Downloading Boot8 ...
EMMC Size: 0x03AB800000
Flash Type: EMMC
INT/EXT RAM Size: 0x20000/0x80000000
Writing(Nand/eMMC)...
Writing PGPT
Writing PROINFO
Writing NVRAM
Writing PROTECT1
Writing PROTECT2
Writing SECCFG
Writing LK
Writing BOOT
Writing RECOVERY
Writing PARA
Writing LOGO
Writing EXPDB
Writing FRP
Writing NVDATA
Writing METADATA
Writing OEMKEYSTORE
Writing SECRO
Writing KEYSTORE
Writing SYSTEM
Writing CACHE
Writing FLASHINFO
Checking Sum...
Write Done.
>>Total time: 8 mins 32 s
safe to say you will need firmware for your exact build number, you'll need to look for another l8plus with the same build number as yours to backup firmware from then flash the backup to yours