Hi, Guest! Login / Register




Thread Rating:
  • 41 Vote(s) - 4.9 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Downloads] Collection of Tecno stock ROMs / firmware


(09-19-2014, 10:29 AM)eti9 Wrote: please I need access to download Tecno M5 (MTK Backup)

granted!


Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Pls I need granted access to download tecno p5 stock rom. No access. Thanks
(09-19-2014, 12:30 PM)giftium Wrote: Pls I need granted access to download tecno p5 stock rom. No access. Thanks

you registered with a yahoo account. we will need a gmail account to grant
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
hello hovatek.
still yet to fix the logo.bin error on my tecno f5. sp flash tool is not flashing a damn thing cos after setting up the entire procedure, then when i switch off my phone and plug it to the system. my phone starts charging. nothing else. please help me rectify this error so that i can make my backup n upload to enable other forumites fix their phones.
(09-20-2014, 08:31 AM)Agumba1 Wrote: hello hovatek.
still yet to fix the logo.bin error on my tecno f5. sp flash tool is not flashing a damn thing cos after setting up the entire procedure, then when i switch off my phone and plug it to the system. my phone starts charging. nothing else. please help me rectify this error so that i can make my backup n  upload to enable other forumites fix their phones.

you'll need to manually install Vcom drivers. follow this guide @ http://forum.hovatek.com/thread-440.html

Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
(09-20-2014, 08:44 AM)hovatek Wrote:
(09-20-2014, 08:31 AM)Agumba1 Wrote: hello hovatek.
still yet to fix the logo.bin error on my tecno f5. sp flash tool is not flashing a damn thing cos after setting up the entire procedure, then when i switch off my phone and plug it to the system. my phone starts charging. nothing else. please help me rectify this error so that i can make my backup n  upload to enable other forumites fix their phones.

you'll need to manually install Vcom drivers. follow this guide @ http://forum.hovatek.com/thread-440.html

i've installed the vcom drivers but when i connect my switched off phone to the system. the progress bar reads 100% immediately and turns red while after 3 sec a hint window pops up nothing else.
(09-20-2014, 08:44 AM)hovatek Wrote:
(09-20-2014, 08:31 AM)Agumba1 Wrote: hello hovatek.
still yet to fix the logo.bin error on my tecno f5. sp flash tool is not flashing a damn thing cos after setting up the entire procedure, then when i switch off my phone and plug it to the system. my phone starts charging. nothing else. please help me rectify this error so that i can make my backup n  upload to enable other forumites fix their phones.

you'll need to manually install Vcom drivers. follow this guide @ http://forum.hovatek.com/thread-440.html

i v installed the vcom drivers as instructed but when i connect my phone after setting up the sp flash requirements.the progress bar reads a 100% and turns red immediately. then nothing else. what do i do now pls?
could u please grant me permission to download the tecno h5 rom my email is [email protected] thank you
(09-20-2014, 10:49 AM)Agumba1 Wrote: i v installed the vcom drivers as instructed but when i connect my phone after setting up the sp flash requirements.the progress bar reads a 100% and turns red immediately. then nothing else. what do i do now pls?

Read http://forum.hovatek.com/thread-439.html and post all questions as comment under that post
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
(This post was last modified: 09-20-2014, 11:55 AM by hovatek. )
(09-20-2014, 11:37 AM)joe Wrote: could u please grant me permission to download the tecno h5 rom my email is [email protected] thank you
granted for Tecno H5 MTK
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)










Users browsing this thread:
2 Guest(s)