Hovatek Forum MOBILE Android Tecno Spark 2 KA7 Dual SIM - 16GB HDD - 1GB RAM
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Tecno Spark 2 KA7 Dual SIM - 16GB HDD - 1GB RAM

Tecno Spark 2 KA7 Dual SIM - 16GB HDD - 1GB RAM

Pages (2): 1 2 Next
dotcom024
dotcom024
dotcom024
Techie Member
40
08-12-2019, 10:02 PM
#1



Hello everyone, please I need everyone's help.Tecno Spark 2 KA7 Dual SIM - 16GB HDD - 1GB RAM. i did some rooting and it was working and i got to a problem so i downloaded 
[Hovatek] Tecno Spark 2 KA7O (KA7-H8024D-O-180615V104)
[Hovatek] Tecno Spark 2 KA7O (KA7-H8024DEF-O-180810V128)
Both did not flash my phone because of error S_SECURITY_SEND_AUTH_FAIL (6029), MSP ERROE CODE : 0x00
So i did some digging, a lot of digging and i realize that when i putt the phone in recovery mode and i connect to the pc there is a name like asus_z00vd instead of tecno spark 2 ka7.

Expire date:

Miracle Thunder More Faster More Powerfull !
Check Authentication...
Network connected error
System Info:
id:KA7-H8024D-O-180615V104
version:8.1.0
model:TECNO KA7O
brand:TECNO
manufacturer:TECNO MOBILE LIMITED
Definition Applied
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set MediaTek USB Port (COM7)
Connecting to Phone,Wait..
Error:R001
Not Write EEP, not change SN and RF data
Definition Applied
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set MediaTek USB Port (COM7)
Connecting to Phone,Wait..
Connected to Phone.
CPU: MT6580 SW:0000 Ver: CA00
Downloading Boot8 ...
The Boot not support the Phone, or CPU Bad. Select other Boot.
Definition Applied
1. Power Off Phone , Remove Battery, Insert Battery Back
2. Insert USB cable. In some cases Required Hold BootKey
3. Use Miracle Boot Key In cases Boot key not Find
4. Battery Should be Charged more then 50%
Waiting for USB Port...
Set MediaTek USB Port (COM7)
Connecting to Phone,Wait..
Connected to Phone.

{when i connect to pc in recovery mode (ADB)}
Hardware:mt6580
  Board:mt6580

  CPU ABI:armeabi-v7a

  Manufacturer:asus

  Model:asus_z00vd

  Android Ver:8.1.0

  bootloader ver:unknown

  USB config:mtp,adb

  User:nik-kst

  Build number:omni_zc500tg-eng 8.1.0 opm4.171019.016.b1 eng.nik-ks.20180517.111347 test-keys

  ID:opm4.171019.016.b1

  Chipset:mt6580

  Root:  Rooted

  Done

  Definition Applied

  Starting...

  searching for devices...

  devices found:

  Wipe Dalvik Cache Starting....

  Wipe Dalvik Cache Done....

  Definition Applied

  Connecting to Phone,Wait..ok

  Wipe data...
>>Done


And so i google name asus_z00vd and i came up with this phone, http://specdevice.com/showspec.php?id=d3...ff9c09006c
https://www.asus.com/Phone/ZenFone-Go-ZC...Desk_BIOS/
Please how is this possible and PLEASE my phone is dead i need help to flash it to life. 
This post was last modified: 08-12-2019, 10:20 PM by dotcom024.
Attached Files
.png
Screenshot (5).png
Size: 120.88 KB / Downloads: 16
.png
Screenshot (8).png
Size: 203.74 KB / Downloads: 2
.png
Screenshot (10).png
Size: 445.41 KB / Downloads: 2
X3non
X3non
X3non
Recognized Contributor
22,062
09-12-2019, 10:43 AM
#2
(08-12-2019, 10:02 PM)dotcom024 Hello everyone, please I need everyone's help....

flash your device using format all + download in software download tool @ https://www.hovatek.com/forum/thread-23709.html
dotcom024
dotcom024
dotcom024
Techie Member
40
09-12-2019, 09:02 PM
#3
(09-12-2019, 10:43 AM)X3non
(08-12-2019, 10:02 PM)dotcom024 Hello everyone, please I need everyone's help....

flash your device using format all + download in software download tool @ https://www.hovatek.com/forum/thread-23709.html

please, Sir, I did but the same error. please if you have the SP Flash Tool Authentication files

Tecno Spark 2 KA7 please please give it to me or please do you know how to create one so i can flash my Mom's phone please.
This post was last modified: 09-12-2019, 09:08 PM by dotcom024.
X3non
X3non
X3non
Recognized Contributor
22,062
10-12-2019, 01:31 AM
#4
(09-12-2019, 09:02 PM)dotcom024 please, Sir, I did but the same error. please if you have the SP Flash Tool Authentication files

Tecno Spark 2 KA7 please please give it to me or please do you know how to create one so i can flash my Mom's phone please.

attach a full screenshot the error message you get when you try using software download tool
dotcom024
dotcom024
dotcom024
Techie Member
40
10-12-2019, 04:55 PM
#5



SP Flash Tool Authentication files Tecno Spark 2 KA7 please, please...
Noting works so, please 
This post was last modified: 10-12-2019, 04:58 PM by dotcom024.
Attached Files
.jpg
ScreenShot_191210.jpg
Size: 248.7 KB / Downloads: 4
.png
Screenshot (16).png
Size: 159.12 KB / Downloads: 4
dotcom024
dotcom024
dotcom024
Techie Member
40
10-12-2019, 05:08 PM
#6
I can show you other software I used but they all seem to show the same error, please SP Flash Tool Authentication files Tecno Spark 2 KA7 please please.
Attached Files
.png
Screenshot (13).png
Size: 322.33 KB / Downloads: 4
.png
Screenshot (14).png
Size: 324.47 KB / Downloads: 4
freshtyt
freshtyt
freshtyt
Senior Member
2,949
10-12-2019, 10:42 PM
#7
(10-12-2019, 04:55 PM)dotcom024 SP Flash Tool Authentication files Tecno Spark 2 KA7 please, please...
Noting works so, please 

firstly, you're supposed to flash firmware marked with [factory / signed] @ https://www.hovatek.com/forum/thread-24299.html , what you currently have isnt signed and efuse is disabled
secondly, if you get an error about dongle then try all other software download tool versions @ https://www.hovatek.com/forum/thread-23708.html
dotcom024
dotcom024
dotcom024
Techie Member
40
11-12-2019, 07:01 AM
#8
Yes please I did use the [Hovatek] Tecno Spark 2 KA7O (KA7-H8024D-O-180615V104)
and Tecno Spark 2 KA7O (KA7-H8024DEF-O-180810V128) [Factory / Signed]
And they show the same error.
X3non
X3non
X3non
Recognized Contributor
22,062
11-12-2019, 01:18 PM
#9
(11-12-2019, 07:01 AM)dotcom024 Yes please I did use the [Hovatek] Tecno Spark 2 KA7O (KA7-H8024D-O-180615V104)
and Tecno Spark 2 KA7O (KA7-H8024DEF-O-180810V128) [Factory / Signed]
And they show the same error.

where is the screenshot of flashing the factory firmware?
dotcom024
dotcom024
dotcom024
Techie Member
40
11-12-2019, 10:11 PM
#10



where is the screenshot of flashing the factory firmware?
Please did it but the same error, i deleted it and downloaded

[Hovatek] Tecno Spark 2 KA7 (KA7-H8024A-GO-180609V123)

And this one too the same error.
Attached Files
.png
Screenshot (22).png
Size: 371.71 KB / Downloads: 4
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram