Hovatek Forum MOBILE Android Backup Camon 12 CC7
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Backup Camon 12 CC7

Backup Camon 12 CC7

Pages (4): Previous 1 2 3 4 Next
mencoronaldo
mencoronaldo
mencoronaldo
Senior Member
201
14-12-2019, 03:22 PM
#11



(13-12-2019, 05:09 PM)innagee
(13-12-2019, 04:08 PM)mencoronaldo I discovered that the phone was stuck in download mode.
I "Readinfo" using miracle thunder 2.82 which put it out of download mode.
Does it means that the device bootloader can't be unlocked because my PC can't detect it the device via "fastboot devices"

Sent from my TECNO CC7 using Hovatek Mobile

Try the fix for fastboot not detecting @ https://www.hovatek.com/forum/thread-17105.html

I succeeded in unlocking the bootloader but unable to load mt6762 scatter file into sp_flashtool. Sp Flashtool detects my device as mt6765, so I used wwr to create scatter for mt6765 loaded it into spflashtool but when i try to readback i get this error STATUS_UNSUPPORT_CTRL_CODE (0xC0010004)
mencoronaldo
mencoronaldo
mencoronaldo
Senior Member
201
14-12-2019, 03:24 PM
#12
screenshot
Attached Files
.png
Sp Error.png
Size: 48.47 KB / Downloads: 13
X3non
X3non
X3non
Recognized Contributor
22,062
14-12-2019, 06:48 PM
#13
(14-12-2019, 03:22 PM)mencoronaldo I succeeded in unlocking the bootloader but unable to load mt6762 scatter file into sp_flashtool. Sp Flashtool detects my device as mt6765, so I used wwr to create scatter for mt6765 loaded it into spflashtool but when i try to readback i get this error STATUS_UNSUPPORT_CTRL_CODE (0xC0010004)

is there an error message if you use an mt6762 scatter file in sp flash tool?
and what about reading firmware using miracle thunder?
This post was last modified: 14-12-2019, 06:50 PM by X3non.
mencoronaldo
mencoronaldo
mencoronaldo
Senior Member
201
14-12-2019, 07:16 PM
#14
(14-12-2019, 06:48 PM)X3non
(14-12-2019, 03:22 PM)mencoronaldo I succeeded in unlocking the bootloader but unable to load mt6762 scatter file into sp_flashtool. Sp Flashtool detects my device as mt6765, so I used wwr to create scatter for mt6765 loaded it into spflashtool but when i try to readback i get this error STATUS_UNSUPPORT_CTRL_CODE (0xC0010004)

is there an error message if you use an mt6762 scatter file in sp flash tool?
and what about reading firmware using miracle thunder?

Error messages on sp_flashtool (mt6762) and miracle thunder 2.82
Attached Files
.jpg
mir_191214191251.jpg
Size: 161.15 KB / Downloads: 19
.png
mt6762 error.png
Size: 43.68 KB / Downloads: 23
X3non
X3non
X3non
Recognized Contributor
22,062
16-12-2019, 01:13 PM
#15



(14-12-2019, 07:16 PM)mencoronaldo Error messages on sp_flashtool (mt6762) and miracle thunder 2.82

for miracle, i'd advise you try a few more times to see if its the same error but it seems to have halted at preloader just like spft did
for spft, skip preloader for now and try reading from emmc_user (ie pgpt first then full emmc dump after you get the full length address). i think reading preloader is somehow not supported or blocked
This post was last modified: 16-12-2019, 01:22 PM by X3non.
mencoronaldo
mencoronaldo
mencoronaldo
Senior Member
201
16-12-2019, 01:40 PM
#16
(16-12-2019, 01:13 PM)X3non
(14-12-2019, 07:16 PM)mencoronaldo Error messages on sp_flashtool (mt6762) and miracle thunder 2.82

for miracle, i'd advise you try a few more times to see if its the same error but it seems to have halted at preloader just like spft did
for spft, skip preloader for now and try reading from emmc_user (ie pgpt first then full emmc dump after you get the full length address). i think reading preloader is somehow not supported or blocked
How do i know the address and length of pgpt?
mencoronaldo
mencoronaldo
mencoronaldo
Senior Member
201
16-12-2019, 01:49 PM
#17
(16-12-2019, 01:40 PM)mencoronaldo
(16-12-2019, 01:13 PM)X3non
(14-12-2019, 07:16 PM)mencoronaldo Error messages on sp_flashtool (mt6762) and miracle thunder 2.82

for miracle, i'd advise you try a few more times to see if its the same error but it seems to have halted at preloader just like spft did
for spft, skip preloader for now and try reading from emmc_user (ie pgpt first then full emmc dump after you get the full length address). i think reading preloader is somehow not supported or blocked
How do i know the address and length of pgpt?
I've tried the read back of pgpt (EMMC_USER, 0x0, 0x80000) using spft but i get the same error as before
X3non
X3non
X3non
Recognized Contributor
22,062
16-12-2019, 11:48 PM
#18
(16-12-2019, 01:49 PM)mencoronaldo I've tried the read back of pgpt (EMMC_USER, 0x0, 0x80000) using spft but i get the same error as before

retry using latest sp flash tool @ https://www.hovatek.com/forum/thread-13970.html
if this doesn't work, you can try a different approach
try rooting your device using mtk-su temp root as explained @ https://forum.xda-developers.com/android...8-t3922213 , if successful, then create backup using the adb tab in wwr_mtk v2.51
X3non
X3non
X3non
Recognized Contributor
22,062
18-12-2019, 09:16 AM
#19
(16-12-2019, 01:49 PM)mencoronaldo I've tried the read back of pgpt (EMMC_USER, 0x0, 0x80000) using spft but i get the same error as before

EDIT: the xda link in my previous post only grants temp root for the currently opened adb window
use the post @ https://forum.xda-developers.com/showpos...tcount=135 to get full root access which wwr tool can get access to
hovatek
hovatek
hovatek
Administrator
49,570
18-12-2019, 10:14 AM
#20



(16-12-2019, 01:49 PM)mencoronaldo I've tried the read back of pgpt (EMMC_USER, 0x0, 0x80000) using spft but i get the same error as before

What version of sp flash tool are you using?

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (4): Previous 1 2 3 4 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram