Hovatek Forum DEVELOPMENT Android TWRP Recovery
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


TWRP Recovery

TWRP Recovery

Pages (6): Previous 1 2 3 4 5 6 Next
X3non
X3non
X3non
Recognized Contributor
22,062
19-12-2019, 10:29 AM
#11



(19-12-2019, 02:40 AM)Bhupender890 Yes you are right Sir, but I only know about sp flash tool by which we can flash recovery only, in phones that are not turned on but whenever I try SP FLASH tool it shows some error , even VCOM drivers are automatically installed when I connect usb to phone but after few seconds it shows error "Broom Error CMD FAIL " something like that and beacuse phone is unable to boot into fastboot so I can't flash recovery through adb fastboot. So instead of flashing full firmware I have no other option left.
I use TECNO FLASH TOOL to flash firmware as Sp flash tool doesn't work for me.
Sir can we flash recovery alone from TECNO FLASH TOOL or awd tool ?

Sent from my TECNO ID5a using Hovatek Mobile

when flashing using sp flash tool, ensure to use custom DA file for your model ; download @ https://www.hovatek.com/forum/thread-23243.html
for now, you can't flash only recovery using swd tool


(19-12-2019, 10:26 AM)Bhupender890 I tried for 8.0 G and found the same results, recovery is unbootable.
Sir why don't you make recovery for my phone please.

Sent from my TECNO ID5a using Hovatek Mobile

seeing as you flashed stock firmware, did you flash magisk patched boot before flashing twrp from 8.1G?
Bhupender890
Bhupender890
Bhupender890
Experienced Member
84
19-12-2019, 10:37 AM
#12
Yes Sir absolutely, I flashed magisk patched before flashing twrp 8.1G
Also my phone is not listed on the link you shared for custom DA files.

Sent from my TECNO ID5a using Hovatek Mobile
This post was last modified: 19-12-2019, 10:46 AM by Bhupender890.
xerxes
xerxes
xerxes
Senior Member
8,355
19-12-2019, 07:45 PM
#13
(19-12-2019, 10:37 AM)Bhupender890 Yes Sir absolutely, I flashed magisk patched before flashing twrp 8.1G
Also my phone is not listed on the link you shared for custom DA files.

Sent from my TECNO ID5a using Hovatek Mobile

Try the DA for ID5B @ https://www.hovatek.com/forum/thread-23243.html
Bhupender890
Bhupender890
Bhupender890
Experienced Member
84
20-12-2019, 04:39 AM
#14
Thanks Sir, you are awesome, the custom DA file you recommended is working flawlessly for my phone. You have solved my biggest issue that always comes up during flashing from SP flash tool.
I tested it by flashing stock boot first as my phone is rooted with magisk then I tried to flash ported twrps after flashing magisk patched boot and got success message every time.
But what about recovery, I got the same results as before. What should I do now?

Sent from my TECNO ID5a using Hovatek Mobile
This post was last modified: 20-12-2019, 08:36 AM by Bhupender890.
X3non
X3non
X3non
Recognized Contributor
22,062
20-12-2019, 11:35 AM
#15



(20-12-2019, 04:39 AM)Bhupender890 Thanks Sir, you are awesome, the custom DA file you recommended is working flawlessly for my phone. You have solved my biggest issue that always comes up during flashing from SP flash tool.
I tested it by flashing stock boot first as my phone is rooted with magisk then I tried to flash ported twrps after flashing magisk patched boot and got success message every time.
But what about recovery, I got the same results as before. What should I do now?

Sent from my TECNO ID5a using Hovatek Mobile

try porting philz recovery @ https://www.hovatek.com/forum/thread-21495.html
Bhupender890
Bhupender890
Bhupender890
Experienced Member
84
20-12-2019, 01:30 PM
#16
Tried but same problem as in previous TWRP ports.
Can I try flashing TWRP ported for same chipset as of my phone by porting it again with hovatek TWRP Porter tool or it can land me in serious trouble ?

Sent from my TECNO ID5a using Hovatek Mobile
This post was last modified: 20-12-2019, 02:25 PM by Bhupender890.
X3non
X3non
X3non
Recognized Contributor
22,062
20-12-2019, 08:13 PM
#17
(20-12-2019, 01:30 PM)Bhupender890 Tried but same problem as in previous TWRP ports.
Can I try flashing TWRP ported for same chipset as of my phone by porting it again with hovatek TWRP Porter tool or it can land me in serious trouble ?

Sent from my TECNO ID5a using Hovatek Mobile

whats the kernel version of this device?
also attach a screenshot of magisk manager app
Bhupender890
Bhupender890
Bhupender890
Experienced Member
84
21-12-2019, 02:05 AM
#18
Kernel version
4.9.77+buildsrv-108@buildsrv-108 #2
Tue Jan 15 00:05:34 CST 2019

Magisk:
https://drive.google.com/file/d/10n9HzYj...p=drivesdk

I use canary (debug) because other versions mainly stable cause boot loops.

Sent from my TECNO ID5a using Hovatek Mobile
This post was last modified: 21-12-2019, 11:09 AM by Bhupender890.
X3non
X3non
X3non
Recognized Contributor
22,062
21-12-2019, 10:17 AM
#19
(21-12-2019, 02:05 AM)Bhupender890 Kernel version
4.9.77+buildsrv-108@buildsrv-108 #2
Tue Jan 15 00:05:34 CST 2019
Magisk:
https://drive.google.com/file/d/1-ELfW-o...p=drivesdk
I use canary (debug) because other versions mainly stable cause boot loops.

Sent from my TECNO ID5a using Hovatek Mobile

check your links (including the stock recovery.img link), they both require permission. post shareable link to the stock recovery.img (right click on the file in google drive then select get shareable link)
Bhupender890
Bhupender890
Bhupender890
Experienced Member
84
21-12-2019, 10:59 AM
#20



I forgot to turn on link sharing, you can check now or download from

Magisk
https://drive.google.com/file/d/10n9HzYj...p=drivesdk

Stock recovery
https://drive.google.com/file/d/14YbjFg_...p=drivesdk

Sent from my TECNO ID5a using Hovatek Mobile
This post was last modified: 21-12-2019, 11:06 AM by Bhupender890.
Pages (6): Previous 1 2 3 4 5 6 Next
Users browsing this thread:
 2 Guest(s)
Users browsing this thread:
 2 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram