Hovatek Forum MOBILE Android [Please help] In need of Scatter file
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] In need of Scatter file

[Please help] In need of Scatter file

Makfred
Makfred
Makfred
Enthusiastic Member
10
20-12-2019, 12:52 PM
#1



Hi, I have a Gionee F100 4g LTE phone and I need it's Scatter file. I downloaded Gionee F100_MT6735_T3511_29042016.zip file and used its Scatter file to flash recovery but so flash tool return this error message: CHIP TYPE NOT match!! Target refuse value:0xA2010000. 
When I connect the phone to my pc, it reads Gionee F100l while at the back of the phone, its Gionee F100. Therefore can you help me with the different variants of Gionee F100 Scatter file? I just need the files. My intention is to try and see which matches. Thanks
xerxes
xerxes
xerxes
Senior Member
8,355
20-12-2019, 07:31 PM
#2
(20-12-2019, 12:52 PM)Makfred Hi, I have a Gionee F100 4g LTE phone and I need it's Scatter file. I downloaded Gionee F100_MT6735_T3511_29042016.zip file and used its Scatter file to flash recovery but so flash tool return this error message: CHIP TYPE NOT match!! Target refuse value:0xA2010000. 
When I connect the phone to my pc, it reads Gionee F100l while at the back of the phone, its Gionee F100. Therefore can you help me with the different variants of Gionee F100 Scatter file? I just need the files. My intention is to try and see which matches. Thanks

You need to confirm your phone’s model before flashing firmware to it, because if you flashed a wrong firmware it will result to a dead phone.
What’s wrong with the phone and how did the problem begin?
Backup your phone’s firmware using miracle box @ https://www.hovatek.com/forum/thread-13347.html , you’ll obtain a scatter file once successful.
X3non
X3non
X3non
Recognized Contributor
22,062
20-12-2019, 07:58 PM
#3
(20-12-2019, 12:52 PM)Makfred Hi, I have a Gionee F100 4g LTE phone and I need it's Scatter file. I downloaded Gionee F100_MT6735_T3511_29042016.zip file and used its Scatter file to flash recovery but so flash tool return this error message: CHIP TYPE NOT match!! Target refuse value:0xA2010000. 
When I connect the phone to my pc, it reads Gionee F100l while at the back of the phone, its Gionee F100. Therefore can you help me with the different variants of Gionee F100 Scatter file? I just need the files. My intention is to try and see which matches. Thanks

backup firmware from your device using either miracle thunder @ https://www.hovatek.com/forum/thread-13347.html or wwr mtk @ https://www.hovatek.com/forum/thread-21970.html ; you'll get a scatter file once backup is successful
Makfred
Makfred
Makfred
Enthusiastic Member
10
20-12-2019, 09:48 PM
#4
thanks for the help. But the phone is locked. Can't access debugging mode to create a Scatter file. I believe if a Scatter file is available I can use sp flash tool or others and I don't want to factory reset phone cos I will loose my data. My intention is to flash a custom recovery so I can access my data. Before resetting it.
X3non
X3non
X3non
Recognized Contributor
22,062
21-12-2019, 09:18 AM
#5



(20-12-2019, 09:48 PM)Makfred thanks for the help. But the phone is locked. Can't access debugging mode to create a Scatter file. I believe if a Scatter file is available I can use sp flash tool or others and I don't want to factory reset phone cos I will loose my data. My intention is to flash a custom recovery so I can access my data. Before resetting it.

USB debugging is not needed for any of the two backup methods
Makfred
Makfred
Makfred
Enthusiastic Member
10
21-12-2019, 02:50 PM
#6
Miracle box version 2.27A could not detect the phone, followed the tutorial on how to install mtk vcom drivers, tried it still it could not see the phone. It sound connection established the sounded disconnect and the phone starts charging. I switched to Wwr. V2.51, create the Scatter file, took it to read back in sp flash tool, and the same error message I post earlier above pop up. Am beginning to wonder whether the phone had a different chipset other than other Gionee F100 (s). I think miracle might do it automatically but it could not see my phone. I use Windows 10.
X3non
X3non
X3non
Recognized Contributor
22,062
21-12-2019, 09:50 PM
#7
(21-12-2019, 02:50 PM)Makfred Miracle box version 2.27A could not detect the phone, followed the tutorial on how to install mtk vcom drivers, tried it still it could not see the phone. It sound connection established the sounded disconnect and the phone starts charging. I switched to Wwr. V2.51, create the Scatter file, took it to read back in sp flash tool, and the same error message I post earlier above pop up. Am beginning to wonder whether the phone had a different chipset other than other Gionee F100 (s). I think miracle might do it automatically but it could not see my phone. I use Windows 10.

which scatter file name did you create while using wwr?
confirm the chipset of your device using the app @ https://www.hovatek.com/forum/thread-13054.html or using cpu-z from playstore
Makfred
Makfred
Makfred
Enthusiastic Member
10
24-12-2019, 04:05 PM
#8
It works! I changed to a different Windows 7 32bit, installed the da vcom driver start the miracle box 2.27a and I was greated with the inactive start button. So I tried using hovatek miracle start button fixer, it didn't work, then I tried the registry editor method and voila, it works. Now I connect the phone and to my surprise, it detect it and started reading it. Thanks for the help, I really appreciate it. My next step is to see how SP FTL will react to it. Will inform when am able to recover my data.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram