Hovatek Forum MOBILE Android Vernee T3 Pro Rom
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Vernee T3 Pro Rom

Vernee T3 Pro Rom

Pages (2): 1 2 Next
Morah Fredrick
Morah Fredrick
Morah Fredrick
Enthusiastic Member
10
22-12-2019, 01:23 AM
#1



i'm in need of Vernee T3 pro rom from a working phone 
I've downloaded most of the rom online
The one's i downloaded bricked my phone \
Pls Help
Thanks In advance
X3non
X3non
X3non
Recognized Contributor
22,062
22-12-2019, 11:11 PM
#2
(22-12-2019, 01:23 AM)Morah Fredrick i'm in need of Vernee T3 pro rom from a working phone 
I've downloaded most of the rom online
The one's i downloaded bricked my phone \
Pls Help
Thanks In advance

what was wrong with your device before you decided to flash?
the firmwares you downloaded, can you confirm that they're not the same firmware build?
lastly, what exactly happens when you flash the firmware(s) you downloaded? whats the present condition of the phone? (totally dead, or something else)
This post was last modified: 31-12-2019, 12:46 PM by hovatek.
Morah Fredrick
Morah Fredrick
Morah Fredrick
Enthusiastic Member
10
23-12-2019, 04:02 AM
#3
i performed an OTA update which was available
after the update it was stuck in a boot loop
i then entered the recovery mode and did factory reset after that the phone refused to boot up
so i looked through the phone's site vernee.cc
and i could see that the same file i was trying to download through the OTA Update was available so
i downloaded it and flashed the phone
right now it does not do anything
but if i plug it into my ps and go to device manager i can see that its  connected
when i try to flash it again with sp flash tool before the flashing process starts the process bar shows red (Download DA 100%) that's after my phone has connected and disconnected on it own.
it does that occasionally or on intervals when i plug it into the system
ps:I've downloaded and updated all the drivers
I don't think its dead because the drivers are showing up in device manager
thanks for you reply
This post was last modified: 23-12-2019, 04:03 AM by Morah Fredrick.
X3non
X3non
X3non
Recognized Contributor
22,062
23-12-2019, 01:03 PM
#4
(23-12-2019, 04:02 AM)Morah Fredrick i performed an OTA update which was available
after the update it was stuck in a boot loop
i then entered the recovery mode and did factory reset after that the phone refused to boot up
so i looked through the phone's site vernee.cc
and i could see that the same file i was trying to download through the OTA Update was available so
i downloaded it and flashed the phone
...

what settings did you flash with? download only, firmware upgrade, format all + download
was the flashing process just before the phone went dead successful with a green tick or ended with an error message?
Morah Fredrick
Morah Fredrick
Morah Fredrick
Enthusiastic Member
10
23-12-2019, 04:47 PM
#5



the first time I used Download only
which it completed with a green tick
but the phone didn't come on it was still stuck in the boot loop
Then I used format all + download then it went completely dead and My PC was not recognizing it again
then i plugged in the phone again this time holding the volume up button and the drivers were reinstalled
tried to flash again and when ever I try to start the flashing process it disconnects and connects again disrupting the flashing process
X3non
X3non
X3non
Recognized Contributor
22,062
24-12-2019, 10:06 AM
#6
(23-12-2019, 04:47 PM)Morah Fredrick the first time I used Download only
which it completed with a green tick
but the phone didn't come on it was still stuck in the boot loop
Then I used format all + download then it went completely dead and My PC was not recognizing it again
...

the format all + download process, was it successful with a green tick or not?
Morah Fredrick
Morah Fredrick
Morah Fredrick
Enthusiastic Member
10
24-12-2019, 02:35 PM
#7
it was
Morah Fredrick
Morah Fredrick
Morah Fredrick
Enthusiastic Member
10
24-12-2019, 02:42 PM
#8
Quick question
Must I flash it with a vernee T3 pro Rom
Like can't I use a rom from like a Tecno caman 11 pro
since they both use the same chipset (MT6739)
Is that possible
because the Rom for the vernee T3 Pro device is so hard to find online
xerxes
xerxes
xerxes
Senior Member
8,355
24-12-2019, 07:13 PM
#9
(24-12-2019, 02:42 PM)Morah Fredrick Quick question
Must I flash it with a vernee T3 pro Rom
Like can't I use a rom from like a Tecno caman 11 pro
since they both use the same chipset (MT6739)
Is that possible
because the Rom for the vernee T3 Pro device is so hard to find online

just because a phone has the same CPU with yours doesn’t mean they can share the same firmware.
you must use a vernee T3 pro firmware. Which firmware did you use to flash it?
Can you get access to a working Vernee T3 Pro device?
Morah Fredrick
Morah Fredrick
Morah Fredrick
Enthusiastic Member
10
24-12-2019, 10:04 PM
#10



i used a Vernee T3 Pro firmware
I can't get access unless I order another one online
If you can get access to one please I'll be very grateful
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram