Hovatek Forum MOBILE Android Vernee T3 Pro Rom
Try our Online TWRP Builder..its free!
Can't login? Please, reset your password.


Vernee T3 Pro Rom

Vernee T3 Pro Rom

Pages (2): Previous 1 2
Morah Fredrick
Morah Fredrick
Morah Fredrick
Enthusiastic Member
10
24-12-2019, 10:41 PM
#11



Do you have any idea why the device is disconnecting whenever i want to initiate flashing
X3non
X3non
X3non
Recognized Contributor
22,062
24-12-2019, 11:24 PM
#12
(24-12-2019, 02:35 PM)Morah Fredrick it was

disconnect / reconnect the battery of the device (if it has inbuilt battery then disassemble the back cover to get to the battery) then allow the phone to charge using an AC charge for a few hours before attempting to power it on again
Morah Fredrick
Morah Fredrick
Morah Fredrick
Enthusiastic Member
10
25-12-2019, 02:43 AM
#13
i've tried that (Even Had to by a screw driver for that)
still did not work
X3non
X3non
X3non
Recognized Contributor
22,062
26-12-2019, 12:03 PM
#14
(25-12-2019, 02:43 AM)Morah Fredrick i've tried that (Even Had to by a screw driver for that)
still did not work

if this is the case and you also mentioned that you were able to successfully format & download the firmware you download, then the firmware isn't compatible. you can try contacting vernee support, maybe they can assist you with a different firmware
Morah Fredrick
Morah Fredrick
Morah Fredrick
Enthusiastic Member
10
26-12-2019, 01:37 PM
#15



I have tried contacting them
Seems their support doesn't work
its been over a month now, no response
even sent them a ticket

However, I've been able to find someone to extract a The same ROM from his working device
But i'm doubting that it the device will be able to be flashed because of the disconnecting once I initiate flashing in SP Flash Tool Issue

If I am able to find the compatible firmware will it stop the disconnecting once I initiate flashing in SP Flash Tool Issue?
X3non
X3non
X3non
Recognized Contributor
22,062
27-12-2019, 11:17 AM
#16
(26-12-2019, 01:37 PM)Morah Fredrick I have tried contacting them
...
If I am able to find the compatible firmware will it stop the disconnecting once I initiate flashing in SP Flash Tool Issue?

No, disconnect / reconnect the battery then retry flashing or try flashing without the battery
Morah Fredrick
Morah Fredrick
Morah Fredrick
Enthusiastic Member
10
27-12-2019, 02:14 PM
#17
i've tried that too
hovatek
hovatek
hovatek
Administrator
49,570
31-12-2019, 12:58 PM
#18
(27-12-2019, 02:14 PM)Morah Fredrick i've tried that too

The update appears to be buggy.
Doing that format just made things worse.
Uninstall all Medatek drivers (ensure to show hidden devices in device manager) under COM Port then reboot the PC
Next, install Mediatek VCOM driver and try flashing.
If still connection-disconnection then take note of the COM Port number that appears at the bottom right of SP Flash tool (once connected) and update it using the VCOM driver with the technique below


Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (2): Previous 1 2
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram