Bricked Tecno Camon 11 reboots when connected to pc (MiracleBox)
Bricked Tecno Camon 11 reboots when connected to pc (MiracleBox)
(30-12-2019, 05:23 PM)peterSabs I am trying to the flash stock ROM for Tecno Camon 11 with miracle box. My cousin mistakenly tried updating the phone with a normal OTA update not knowing that it was rooted.
I have Miracle Box and the drivers are all set, Miracle Box detects the phone but before the "Downloading Boot8" operation finished the phone begins to boot into recovery. It keeps doing this except I press the "Volume up Button" but then the driver detected for the phone becomes "USB Serial Device" instead of "Mediatek Preloader USB VCOM", and so Miracle box fails with "The Boot not support the Phone, or CPU Bad. Select other Boot".
My MiracleBox version is 2.82
My chipset is MT6739
I have exhausted myself trying to fix this. Pls, help me out.
(30-12-2019, 07:08 PM)innagee What’s the phone’s build no.?Thanks for responding. I downloaded a DA file, loaded into MirableBox and tried again but it did not work. It shows "Downloading Boot (External)", reaches 100% and stops there. After a while, the start button becomes active again. Just to be sure, I rebooted to see if it worked it didn't.
Also, the phone requires download agent (DA), did you load it on Miracle before performing operations?
Download the DA for your phone’s model @ https://www.hovatek.com/forum/thread-23243.html, see how to load it on Miracle Box or sp flash tool @ https://www.hovatek.com/forum/thread-23733.html .
If you’re still having difficulties flashing with miracle box then use sp flash tool @ https://www.hovatek.com/forum/thread-159.html to flash the phone.
(30-12-2019, 09:28 PM)peterSabs Thanks for responding. I downloaded a DA file, loaded into MirableBox and tried again but it did not work. It shows "Downloading Boot (External)", reaches 100% and stops there. After a while, the start button becomes active again. Just to be sure, I rebooted to see if it worked it didn't.
(31-12-2019, 09:51 AM)X3nonI just downloaded Aftersales and tried as per your instructions, it's not detecting my phone at all, even though MiracleBox is.(30-12-2019, 09:28 PM)peterSabs Thanks for responding. I downloaded a DA file, loaded into MirableBox and tried again but it did not work. It shows "Downloading Boot (External)", reaches 100% and stops there. After a while, the start button becomes active again. Just to be sure, I rebooted to see if it worked it didn't.
download factory firmware @ https://www.hovatek.com/forum/thread-25781.html (skip if you have done so already)
flash using software download tool @ https://www.hovatek.com/forum/thread-23709.html
(31-12-2019, 12:15 PM)peterSabs(31-12-2019, 09:51 AM)X3nonI just downloaded Aftersales and tried as per your instructions, it's not detecting my phone at all, even though MiracleBox is.(30-12-2019, 09:28 PM)peterSabs Thanks for responding. I downloaded a DA file, loaded into MirableBox and tried again but it did not work. It shows "Downloading Boot (External)", reaches 100% and stops there. After a while, the start button becomes active again. Just to be sure, I rebooted to see if it worked it didn't.
download factory firmware @ https://www.hovatek.com/forum/thread-25781.html (skip if you have done so already)
flash using software download tool @ https://www.hovatek.com/forum/thread-23709.html
(31-12-2019, 12:15 PM)peterSabs I just downloaded Aftersales and tried as per your instructions, it's not detecting my phone at all, even though MiracleBox is.
(31-12-2019, 12:15 PM)peterSabs I just downloaded Aftersales and tried as per your instructions, it's not detecting my phone at all, even though MiracleBox is.