Hovatek Forum MOBILE Android [Please help] Tecno f5
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Tecno f5

[Please help] Tecno f5

Pages (3): 1 2 3 Next
starly111
starly111
starly111
Junior Member
22
07-05-2015, 01:03 AM
#1



Please, my tecno f5 is hard
bricked, the computer can
detect it has mtk usb port
but when i am flashing i
always get error 2020, 4032
DRAM FAIL and i
downloaded the rom from
hovatek.
hovatek
hovatek
hovatek
Administrator
49,570
07-05-2015, 08:25 AM
#2
(07-05-2015, 01:03 AM)starly111 Please, my tecno f5 is hard
bricked, the computer can
detect it has mtk usb port
but when i am flashing i
always get error 2020, 4032
DRAM FAIL and i
downloaded the rom from
hovatek.

what versions of SP flash tool did you use and what error codes (with the hint at the bottom) did you get for each version

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
starly111
starly111
starly111
Junior Member
22
10-05-2015, 08:57 AM
#3
version 5.13.52.200 gives error 4032 hint: pls check your load to your target which is to be downloaded

V5.1444.0 gives error 3167 no hint
trying to flash only preloader bcs it is hard brick. Detected as mtk usb cord.
This post was last modified: 10-05-2015, 09:05 AM by starly111.
hovatek
hovatek
hovatek
Administrator
49,570
10-05-2015, 12:12 PM
#4
(10-05-2015, 08:57 AM)starly111 version 5.13.52.200 gives error 4032 hint: pls check your load to your target which is to be downloaded

V5.1444.0 gives error 3167 no hint
trying to flash only preloader bcs it is hard brick. Detected as mtk usb cord.

uninstall then re-install vcom drivers using the guide @ https://www.hovatek.com/forum/thread-440.html
also double-check to be sure you downloaded the F5 ROM

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
starly111
starly111
starly111
Junior Member
22
10-05-2015, 01:42 PM
#5



I have done that. Can't i flash it with mtk usb port as the driver.
X3non
X3non
X3non
Recognized Contributor
22,062
10-05-2015, 01:56 PM
#6
(10-05-2015, 01:42 PM)starly111 I have done that. Can't i flash it with mtk usb port as the driver.

The driver should read as "vcom preloader"
hovatek
hovatek
hovatek
Administrator
49,570
10-05-2015, 04:49 PM
#7
(10-05-2015, 01:56 PM)X3non The driver should read as "vcom preloader"

true

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
starly111
starly111
starly111
Junior Member
22
11-05-2015, 12:00 AM
#8
sometimes it detect it as vcom preloader but still can't flash it. Is d preloder corrupted or what?
starly111
starly111
starly111
Junior Member
22
11-05-2015, 12:14 AM
#9
i had u can replace the preloader.bin through d phone test point, how pls?
hovatek
hovatek
hovatek
Administrator
49,570
11-05-2015, 09:40 AM
#10



(11-05-2015, 12:14 AM)starly111 i had u can replace the preloader.bin through d phone test point, how pls?
thats the usb jig approach. we've not released a tutorial on that yet
if you're getting the 4032 error (mismatch) then i advise you to try get another working F5, backup then flash to the phone
This post was last modified: 11-05-2015, 09:44 AM by hovatek.

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (3): 1 2 3 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram