Hi, Guest! Login / Register




Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5

[Please help] Tecno f5

#1

Please, my tecno f5 is hard
bricked, the computer can
detect it has mtk usb port
but when i am flashing i
always get error 2020, 4032
DRAM FAIL and i
downloaded the rom from
hovatek.


Reply
#2
(05-07-2015, 01:03 AM)starly111 Wrote: Please, my tecno f5 is hard
bricked, the computer can
detect it has mtk usb port
but when i am flashing i
always get error 2020, 4032
DRAM FAIL and i
downloaded the rom from
hovatek.

what versions of SP flash tool did you use and what error codes (with the hint at the bottom) did you get for each version
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#3
(This post was last modified: 05-10-2015, 09:05 AM by starly111. )
version 5.13.52.200 gives error 4032 hint: pls check your load to your target which is to be downloaded

V5.1444.0 gives error 3167 no hint
trying to flash only preloader bcs it is hard brick. Detected as mtk usb cord.
Reply
#4
(05-10-2015, 08:57 AM)starly111 Wrote: version 5.13.52.200 gives error 4032 hint: pls check your load to your target which is to be downloaded

V5.1444.0 gives error 3167 no hint
trying to flash only preloader bcs it is hard brick. Detected as mtk usb cord.

uninstall then re-install vcom drivers using the guide @ https://forum.hovatek.com/thread-440.html
also double-check to be sure you downloaded the F5 ROM
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#5
I have done that. Can't i flash it with mtk usb port as the driver.
Reply
#6
(05-10-2015, 01:42 PM)starly111 Wrote: I have done that. Can't i flash it with mtk usb port as the driver.

The driver should read as "vcom preloader"
Reply
#7
(05-10-2015, 01:56 PM)X3non Wrote: The driver should read as "vcom preloader"

true
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply
#8
sometimes it detect it as vcom preloader but still can't flash it. Is d preloder corrupted or what?

Reply
#9
i had u can replace the preloader.bin through d phone test point, how pls?
Reply
#10
(This post was last modified: 05-11-2015, 09:44 AM by hovatek. )
(05-11-2015, 12:14 AM)starly111 Wrote: i had u can replace the preloader.bin through d phone test point, how pls?
thats the usb jig approach. we've not released a tutorial on that yet
if you're getting the 4032 error (mismatch) then i advise you to try get another working F5, backup then flash to the phone
Need further assistance? Speak with a Hovatek Representative:
Working Hours: Mondays - Saturdays ; 09:00 - 18:00 (GMT +1:00)
Reply










Users browsing this thread:
1 Guest(s)