Hovatek Forum MOBILE Android Please help me with installing firmware to Xiaomi Redmi Note 4x
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Please help me with installing firmware to Xiaomi Redmi Note 4x

Please help me with installing firmware to Xiaomi Redmi Note 4x

Pages (4): Previous 1 2 3 4
xerxes
xerxes
xerxes
Senior Member
8,355
27-02-2020, 01:47 PM
#31



(27-02-2020, 10:34 AM)disturbed "if you must flash this device then you must use sp flash tool "

yes and i ask if partition preloader should be unticked when firmware is loaded or just load the scatter and start

Smile

Try without preloader ticked if the problem persist then tick preloader and retry.
X3non
X3non
X3non
Recognized Contributor
22,062
27-02-2020, 03:52 PM
#32
(27-02-2020, 10:34 AM)disturbed "if you must flash this device then you must use sp flash tool "

yes and i ask if partition preloader should be unticked when firmware is loaded or just load the scatter and start

Smile

oh yes, i understand now
your device isn't totally dead so you can flash without ticking preloader, you would normally only need preloader if you flashed a wrong firmware or formatted everything including preloader
disturbed
disturbed
disturbed
Senior Member
280
27-02-2020, 04:21 PM
#33
now :


https://ibb.co/mqVrL45
This post was last modified: 27-02-2020, 04:26 PM by disturbed.
X3non
X3non
X3non
Recognized Contributor
22,062
28-02-2020, 12:18 AM
#34
(27-02-2020, 04:21 PM)disturbed now :


https://ibb.co/mqVrL45

did you try the other cust images from the older posts on this thread?
This post was last modified: 28-02-2020, 12:19 AM by X3non.
disturbed
disturbed
disturbed
Senior Member
280
28-02-2020, 11:03 AM
#35



Could you please give me link again and tell me with few words what exactly to do ?
/As always i try everything to be readable and good ordered and now my thoughts are in the order x - try flashing with stock rom with Xiaomi tool and provided 4 images here in thread of the erros and now i am in sp flash tool "wave"
This post was last modified: 05-03-2020, 08:21 AM by disturbed.
X3non
X3non
X3non
Recognized Contributor
22,062
28-02-2020, 05:32 PM
#36
(28-02-2020, 11:03 AM)disturbed Could you please give me link again and tell me with few words what exactly to do ?
/As always i try everything to be readable and good ordered and now my thoughts are in the order x - trial flashing with stock rom with Xiaomi tool and provided 4 images here in thread of the erros and now i am in sp flash tool "wave"

global cust @ https://www.hovatek.com/forum/thread-319...#pid185588
china cust @ https://www.hovatek.com/forum/thread-319...#pid185777

replace the cust within the firmware with either of the above
disturbed
disturbed
disturbed
Senior Member
280
02-03-2020, 10:22 AM
#37
i will look a little later serious about the thread, just wanted to tell something - when tried to unlock the bootloader with my phone servicing box the phone goes auto from fastboot to loading something/like instaling firmware/ and has a percent bar - it`s only a line not with percent with numbers but it`s the same. i let it goes to final but this didn`t happen in maybe 20 minutes...
X3non
X3non
X3non
Recognized Contributor
22,062
03-03-2020, 11:21 AM
#38
(02-03-2020, 10:22 AM)disturbed ...when tried to unlock the bootloader with my phone servicing box the phone goes auto from fastboot to loading something/like instaling firmware/ and has a percent bar - it`s only a line not with percent with numbers but it`s the same. i let it goes to final but this didn`t happen in maybe 20 minutes...

to unlock bootloader, the device must be able to boot to homescreen as you'll need to request permission from xiaomi and enable oem unlock in developer settings
disturbed
disturbed
disturbed
Senior Member
280
04-03-2020, 07:01 PM
#39
it`s me again.

/i was some days at home/

tommorow will go at work and will try replacement of cust partion with file 1 and then with file 2.

If that goes to nowhere what to try next...

is it a rule that software dead phone can always be put info life again?

thanks.
disturbed
disturbed
disturbed
Senior Member
280
05-03-2020, 08:58 AM
#40



for the curious/and not so curious/
the phone is now alive with following flash settings :

like almost always one thing is going good something else is failing - now the digitizer is not working but this should be from the LCD assembly and will attach new one for test.

Thanks again !

[Image: attachment.php?aid=7542]
This post was last modified: 05-03-2020, 10:47 AM by X3non.
Attached Files
.jpg
success flash.jpg
Size: 218.11 KB / Downloads: 6
Pages (4): Previous 1 2 3 4
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram