Hovatek Forum DEVELOPMENT Android [Please help] Custom recovery port for UNIWA F50
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


[Please help] Custom recovery port for UNIWA F50

[Please help] Custom recovery port for UNIWA F50

Pages (2): 1 2 Next
Alpamayo
Alpamayo
Alpamayo
Techie Member
64
26-01-2020, 10:40 PM
#1



Hi, I'm badly trying to make a custom recovery for my UNIWA F50 (also known as QINGOO F3). I started with Mediatek Auto TWRP Recovery Porter V1.0 which didn't work at all (the phone rebooted to system), secondly I tried V.1.2 (still nothing), then V.1.4: this time I only got the Teamwin logo on a constant loop (no good). I did not try V.1.5 because it is only for Android Pie. Then I tried MTK Auto Philz Recovery Porter V1.5 and the recovery I got had huge characters and was unmanageable (see pic) https://ibb.co/1JzWByF
My preference goes to TWRP but at this point ANY custom recovery will do. My phone runs on Android 6 and is MTK6737M. It's rooted with Magisk and I extracted the stock recovery image with Miracle Box. I have flashed the non working recoveries with FlashTools. My stock recovery is here https://mega.nz/#!UEIziYRY!7GH7EhznpB-1e...YgJ8WOMXkA
Since I'm stuck any help or any pointers would be much appreciated. Thank you

Boot with magisk root: https://mega.nz/#!NNIhiYAC!7LPoeSiKCrIg0...QyTpIwJi1A
Stock boot: https://mega.nz/#!wRYXUIpS!Kkoj1vBXKB1uc...8aAdO0Omr4
This post was last modified: 27-01-2020, 01:38 PM by Alpamayo.
X3non
X3non
X3non
Recognized Contributor
22,062
27-01-2020, 12:52 PM
#2
(26-01-2020, 10:40 PM)Alpamayo Hi, I'm badly trying to make a custom recovery for my UNIWA F50 (also known as QINGOO F3). I started with Mediatek Auto TWRP Recovery Porter V1.0 which didn't work at all (the phone rebooted to system), then I tried MTK Auto Philz Recovery Porter V1.5 and the recovery I got had huge characters and was unmanageable (see pic) https://ibb.co/1JzWByF
My preference goes to TWRP but at this point ANY custom recovery will do. My phone runs on Android 6 and is MTK6735. It's rooted with Magisk and I extracted the stock recovery image with Miracle Box. I have flashed the non working recoveries with FlashTools. My stock recovery is here https://mega.nz/#!UEIziYRY!7GH7EhznpB-1e...YgJ8WOMXkA
Since I'm stuck any help or any pointers would be much appreciated. Thank you

Boot with magisk root: https://mega.nz/#!NNIhiYAC!7LPoeSiKCrIg0...QyTpIwJi1A
Stock boot: https://mega.nz/#!wRYXUIpS!Kkoj1vBXKB1uc...8aAdO0Omr4

did you try using mtk twrp porter v1.4 @ https://www.hovatek.com/forum/thread-21839.html ?
Alpamayo
Alpamayo
Alpamayo
Techie Member
64
27-01-2020, 05:19 PM
#3
(27-01-2020, 12:52 PM)X3non
(26-01-2020, 10:40 PM)Alpamayo Hi, I'm badly trying to make a custom recovery for my UNIWA F50 (also known as QINGOO F3). I started with Mediatek Auto TWRP Recovery Porter V1.0 which didn't work at all (the phone rebooted to system), then I tried MTK Auto Philz Recovery Porter V1.5 and the recovery I got had huge characters and was unmanageable (see pic) https://ibb.co/1JzWByF
My preference goes to TWRP but at this point ANY custom recovery will do. My phone runs on Android 6 and is MTK6735. It's rooted with Magisk and I extracted the stock recovery image with Miracle Box. I have flashed the non working recoveries with FlashTools. My stock recovery is here https://mega.nz/#!UEIziYRY!7GH7EhznpB-1e...YgJ8WOMXkA
Since I'm stuck any help or any pointers would be much appreciated. Thank you

Boot with magisk root: https://mega.nz/#!NNIhiYAC!7LPoeSiKCrIg0...QyTpIwJi1A
Stock boot: https://mega.nz/#!wRYXUIpS!Kkoj1vBXKB1uc...8aAdO0Omr4

did you try using mtk twrp porter v1.4 @ https://www.hovatek.com/forum/thread-21839.html ?

Yes I did. In fact a few hours ago I had corrected the original post to include mtk twrp porter v1.4. The result is: I get the Teamwin logo flashing in a loop forever. A little "improvement" but still nothing usable.
X3non
X3non
X3non
Recognized Contributor
22,062
28-01-2020, 06:41 PM
#4
(27-01-2020, 05:19 PM)Alpamayo Yes I did. In fact a few hours ago I had corrected the original post to include mtk twrp porter v1.4. The result is: I get the Teamwin logo flashing in a loop forever. A little "improvement" but still nothing usable.

try this twrp @ https://mega.nz/#!OfBHlA5L!30ljvL-mkXYk3...YwVAb6f0V0
Alpamayo
Alpamayo
Alpamayo
Techie Member
64
28-01-2020, 08:15 PM
#5



(28-01-2020, 06:41 PM)X3non
(27-01-2020, 05:19 PM)Alpamayo Yes I did. In fact a few hours ago I had corrected the original post to include mtk twrp porter v1.4. The result is: I get the Teamwin logo flashing in a loop forever. A little "improvement" but still nothing usable.

try this twrp @ https://mega.nz/#!OfBHlA5L!30ljvL-mkXYk3...YwVAb6f0V0
Thank you. Unfortunately the phone gets stuck at the Uniwa logo (I had to remove the battery to reboot). I flashed it twice just to be sure. Sad
Alpamayo
Alpamayo
Alpamayo
Techie Member
64
29-01-2020, 11:44 AM
#6
With any luck I was able to make a working TWRP (3.2.1.0) port for my device (Uniwa F50) and it works just fine. Unfortunately the fonts are VERY VERY small to the point that it's almost impossible to read (magnifying glass needed!) 
Can please anybody help me solve this font issue? 
I uploaded the working recovery here ------>  https://mega.nz/#!5NZWCQAB!cFlsllYOqerkc...iCTuCLV1RY
Thank you.

[Image: font.jpg] Here are the Uniwa F50 specs:

[Image: uniwa-specs.jpg]
This post was last modified: 29-01-2020, 11:55 AM by Alpamayo.
X3non
X3non
X3non
Recognized Contributor
22,062
29-01-2020, 01:57 PM
#7
(29-01-2020, 11:44 AM)Alpamayo With any luck I was able to make a working TWRP (3.2.1.0) port for my device (Uniwa F50) and it works just fine. Unfortunately the fonts are VERY VERY small to the point that it's almost impossible to read (magnifying glass needed!) 
Can please anybody help me solve this font issue? 
...

extract the working twrp, edit ui.xml within \ramdisk\twres using software such as notepad++
you'll find font size within ui.xml, you can modify font size > save the file > repack twrp and test to see the outcome
Alpamayo
Alpamayo
Alpamayo
Techie Member
64
29-01-2020, 04:28 PM
#8
(29-01-2020, 01:57 PM)X3non
(29-01-2020, 11:44 AM)Alpamayo With any luck I was able to make a working TWRP (3.2.1.0) port for my device (Uniwa F50) and it works just fine. Unfortunately the fonts are VERY VERY small to the point that it's almost impossible to read (magnifying glass needed!) 
Can please anybody help me solve this font issue? 
...

extract the working twrp, edit ui.xml within \ramdisk\twres using software such as notepad++
you'll find font size within ui.xml, you can modify font size > save the file > repack twrp and test to see the outcome
Thank you X3non for your prompt reply. With your help I was able to increase the fonts size to something reasonable. I have one last problem though. As you may see in the attached picture I'm having some trouble with the "dividers" which tend to cut on some of the words. Could you please help me find the right entries of the ui.xml so I can resize them? Thank you again so much.

https://i.ibb.co/JqLmMxF/divider1.jpg
X3non
X3non
X3non
Recognized Contributor
22,062
30-01-2020, 09:32 AM
#9
(29-01-2020, 04:28 PM)Alpamayo Thank you X3non for your prompt reply. With your help I was able to increase the fonts size to something reasonable. I have one last problem though. As you may see in the attached picture I'm having some trouble with the "dividers" which tend to cut on some of the words. Could you please help me find the right entries of the ui.xml so I can resize them? Thank you again so much.

https://i.ibb.co/JqLmMxF/divider1.jpg

resize the items listed under variables. if you need pointers, you can check ui.xml from a twrp with similar small screensize just like your device

download @ https://forum.xda-developers.com/attachm...1571300303
Alpamayo
Alpamayo
Alpamayo
Techie Member
64
30-01-2020, 02:42 PM
#10



[attachment=7479 X3non pid='186214' dateline='1580373150']
[quote='Alpamayo' pid='186191' dateline='1580311699']
Thank you X3non for your prompt reply. With your help I was able to increase the fonts size to something reasonable. I have one last problem though. As you may see in the attached picture I'm having some trouble with the "dividers" which tend to cut on some of the words. Could you please help me find the right entries of the ui.xml so I can resize them? Thank you again so much.

https://i.ibb.co/JqLmMxF/divider1.jpg

resize the items listed under variables. if you need pointers, you can check ui.xml from a twrp with similar small screensize just like your device

download @ https://forum.xda-developers.com/attachm...1571300303

Thanks X3non, but the 2 ui.xml file are VERY different from one another. I'm kind of lost .... Sad  I attached the 2 ui.xml files for comparison (rename them .xml). Please be aware that I have modified the ui-FINOW file in the screen resolution (at the very beginning) because it was - odd enough - 320 x 320. The rest is untouched.
This post was last modified: 30-01-2020, 02:55 PM by Alpamayo.
Attached Files
.txt
ui-FINOW.txt
Size: 17.5 KB / Downloads: 5
.txt
ui_UNIWA.txt
Size: 105.84 KB / Downloads: 3
Pages (2): 1 2 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram