[kioko]

I have a tecno camon C7 , I used miracle box to format but it still hangs on boot,please assist

[kioko]

I have a tecno camon C7 , I used miracle box to format but it still hangs on boot,please assist

this is what i see when i get to recovery :  TECNO /full_r/K6735_65u-m0/rlK6735_65u_m6.0/MRA58K/1467708914. I was able to read and did a backup

[X3non]

I have a tecno camon C7 , I used miracle box to format but it still hangs on boot,please assist

this is what i see when i get to recovery :  TECNO /full_r/K6735_65u-m0/rlK6735_65u_m6.0/MRA58K/1467708914. I was able to read and did a backup

from the backup you made, use method 4 or 7 @ https://forum.hovatek.com/thread-16005.html to verify the build number
then download and flash stock firmware for your build number @ https://forum.hovatek.com/thread-19276.html

[kioko]

I have a tecno camon C7 , I used miracle box to format but it still hangs on boot,please assist

this is what i see when i get to recovery :  TECNO /full_r/K6735_65u-m0/rlK6735_65u_m6.0/MRA58K/1467708914. I was able to read and did a backup

from the backup you made, use method 4 or 7 @ https://forum.hovatek.com/thread-16005.html to verify the build number
then download and flash stock firmware for your build number @ https://forum.hovatek.com/thread-19276.html

I was able to identify the buildnumber:C7-H355A1-M-160705V9 but when writing data i get write error as attached below, when i tried sp tool i'm also getting an error

[kioko]

I have a tecno camon C7 , I used miracle box to format but it still hangs on boot,please assist

this is what i see when i get to recovery :  TECNO /full_r/K6735_65u-m0/rlK6735_65u_m6.0/MRA58K/1467708914. I was able to read and did a backup

from the backup you made, use method 4 or 7 @ https://forum.hovatek.com/thread-16005.html to verify the build number
then download and flash stock firmware for your build number @ https://forum.hovatek.com/thread-19276.html

I was able to identify the buildnumber:C7-H355A1-M-160705V9 but when writing data i get write error as attached below, when i tried sp tool i'm also getting an error

and when  i try using sp tool i get the error attached below too

[kioko]

finally when i try miracle box v2.58 the error is set patti

i'm using the stock firmware i downloaded here @https://forum.hovatek.com/thread-19276.html .the scatter file is attached below,for my backup from the pnone and the one i downloaded from the above link

[kioko]

finally when i try miracle box v2.58 the error is  set patti

i'm using the stock firmware i downloaded here  @https://forum.hovatek.com/thread-19276.html    .the scatter file is attached below,for my backup from the pnone and the one i downloaded from the above link

[kioko]

finally when i try miracle box v2.58 the error is  set patti

i'm using the stock firmware i downloaded here  @https://forum.hovatek.com/thread-19276.html    .the scatter file is attached below,for my backup from the pnone and the one i downloaded from the above link

[hovatek]

...

This Miracle box scatter won't work directly in SP flash tool. Try the edit @ https://forum.hovatek.com/thread-24287.html then retry flashing in sp flash tool

[kioko]

...

This Miracle box scatter won't work directly in SP flash tool. Try the edit @ https://forum.hovatek.com/thread-24287.html then retry flashing in sp flash tool

thank you for the reply ,but the same error appears.the error is attached below after editing to both v1.1.2 and 3