Hovatek Forum MOBILE Android Help me Flash Stock Rom Moto C XT1758
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Help me Flash Stock Rom Moto C XT1758

Help me Flash Stock Rom Moto C XT1758

Pages (4): Previous 1 2 3 4 Next
AndersonSilvaa
AndersonSilvaa
AndersonSilvaa
Junior Member
21
08-03-2020, 05:02 AM
#21



(06-03-2020, 02:53 PM)X3non
(06-03-2020, 05:25 AM)AndersonSilvaa I tried what you said, but it didn't change the results on the first attempt without pressing any buttons and the second attempt by pressing the minus button.

well, your problem doesn't seem to be from the flashing tool, neither is it from the DA file (cause someone has previously confirmed the DA to work on the same device model). You've tried a different PC and USB cables as you said, which leaves USB port on the phone
you can try changing that then retry flashing the device
Well I tried it on another computer, as you can see in the images, I also tried all the USB ports, I used 4 different cables (including the original one I found, and they were all tested), the battery is practically 100% too, but I got the same results as the previous computer. I know the cable is not bad because it recognizes on the fastboot and I already used these cables on it and it also works perfectly on my old Galaxy Y. Oh and I know that the cable works because the only thing I can access is the fastboot and the two PCs recognize it perfectly the Moto C in fastboot mode.

[Image: Captura-de-Tela-2.png]

[Image: Captura-de-Tela-3.png]

Battery:
[Image: IMG-20200308-005310.jpg]

Fastboot mode:
[Image: IMG-20200308-005827.jpg]
xerxes
xerxes
xerxes
Senior Member
8,355
09-03-2020, 05:58 AM
#22
(08-03-2020, 05:02 AM)AndersonSilvaa
(06-03-2020, 02:53 PM)X3non
(06-03-2020, 05:25 AM)AndersonSilvaa I tried what you said, but it didn't change the results on the first attempt without pressing any buttons and the second attempt by pressing the minus button.

well, your problem doesn't seem to be from the flashing tool, neither is it from the DA file (cause someone has previously confirmed the DA to work on the same device model). You've tried a different PC and USB cables as you said, which leaves USB port on the phone
you can try changing that then retry flashing the device
Well I tried it on another computer, as you can see in the images, I also tried all the USB ports, I used 4 different cables (including the original one I found, and they were all tested), the battery is practically 100% too, but I got the same results as the previous computer. I know the cable is not bad because it recognizes on the fastboot and I already used these cables on it and it also works perfectly on my old Galaxy Y. Oh and I know that the cable works because the only thing I can access is the fastboot and the two PCs recognize it perfectly the Moto C in fastboot mode.

Have you tried flashing any image via fastboot? If yes, what error did you encounter?
This post was last modified: 09-03-2020, 05:59 AM by xerxes.
X3non
X3non
X3non
Recognized Contributor
22,062
09-03-2020, 09:04 AM
#23
(08-03-2020, 05:02 AM)AndersonSilvaa Well I tried it on another computer, as you can see in the images, I also tried all the USB ports, I used 4 different cables (including the original one I found, and they were all tested), the battery is practically 100% too, but I got the same results as the previous computer. I know the cable is not bad because it recognizes on the fastboot and I already used these cables on it and it also works perfectly on my old Galaxy Y. Oh and I know that the cable works because the only thing I can access is the fastboot and the two PCs recognize it perfectly the Moto C in fastboot mode.
...

retry a different custom settings in miracle thunder, don't select any da or auth file
tick the checkbox beside models, then select your device manufacturer and model from the drop-down boxes
BTW is the bootloader of the phone unlocked?
AndersonSilvaa
AndersonSilvaa
AndersonSilvaa
Junior Member
21
10-03-2020, 02:56 AM
#24
(09-03-2020, 09:04 AM)X3non
(08-03-2020, 05:02 AM)AndersonSilvaa Well I tried it on another computer, as you can see in the images, I also tried all the USB ports, I used 4 different cables (including the original one I found, and they were all tested), the battery is practically 100% too, but I got the same results as the previous computer. I know the cable is not bad because it recognizes on the fastboot and I already used these cables on it and it also works perfectly on my old Galaxy Y. Oh and I know that the cable works because the only thing I can access is the fastboot and the two PCs recognize it perfectly the Moto C in fastboot mode.
...

retry a different custom settings in miracle thunder, don't select any da or auth file
tick the checkbox beside models, then select your device manufacturer and model from the drop-down boxes
BTW is the bootloader of the phone unlocked?
BTW?
AndersonSilvaa
AndersonSilvaa
AndersonSilvaa
Junior Member
21
10-03-2020, 04:11 AM
#25



(09-03-2020, 09:04 AM)X3non
(08-03-2020, 05:02 AM)AndersonSilvaa Well I tried it on another computer, as you can see in the images, I also tried all the USB ports, I used 4 different cables (including the original one I found, and they were all tested), the battery is practically 100% too, but I got the same results as the previous computer. I know the cable is not bad because it recognizes on the fastboot and I already used these cables on it and it also works perfectly on my old Galaxy Y. Oh and I know that the cable works because the only thing I can access is the fastboot and the two PCs recognize it perfectly the Moto C in fastboot mode.
...

retry a different custom settings in miracle thunder, don't select any da or auth file
tick the checkbox beside models, then select your device manufacturer and model from the drop-down boxes
BTW is the bootloader of the phone unlocked?
following what you suggested
[Image: download.png]

[Image: Captura-de-Tela-11.png]
AndersonSilvaa
AndersonSilvaa
AndersonSilvaa
Junior Member
21
10-03-2020, 04:14 AM
#26
(09-03-2020, 05:58 AM)innagee
(08-03-2020, 05:02 AM)AndersonSilvaa
(06-03-2020, 02:53 PM)X3non
(06-03-2020, 05:25 AM)AndersonSilvaa I tried what you said, but it didn't change the results on the first attempt without pressing any buttons and the second attempt by pressing the minus button.

well, your problem doesn't seem to be from the flashing tool, neither is it from the DA file (cause someone has previously confirmed the DA to work on the same device model). You've tried a different PC and USB cables as you said, which leaves USB port on the phone
you can try changing that then retry flashing the device
Well I tried it on another computer, as you can see in the images, I also tried all the USB ports, I used 4 different cables (including the original one I found, and they were all tested), the battery is practically 100% too, but I got the same results as the previous computer. I know the cable is not bad because it recognizes on the fastboot and I already used these cables on it and it also works perfectly on my old Galaxy Y. Oh and I know that the cable works because the only thing I can access is the fastboot and the two PCs recognize it perfectly the Moto C in fastboot mode.

Have you tried flashing any image via fastboot? If yes, what error did you encounter?
I can't unlock the bootloader and then I can't flash anything. And I also didn't find XT1758 rom for RSD or commands to flash files one by one
X3non
X3non
X3non
Recognized Contributor
22,062
10-03-2020, 10:56 AM
#27
(10-03-2020, 04:14 AM)AndersonSilvaa I can't unlock the bootloader and then I can't flash anything. And I also didn't find XT1758 rom for RSD or commands to flash files one by one

the firmwares @ https://mirrors.lolinet.com/firmware/mot.../official/ should be RSD compatible, you can try it out with RSD
you won't be able to manually flash files one by one in fastboot on a locked bootloader except you're using RSDlite tool
This post was last modified: 10-03-2020, 10:57 AM by X3non.
AndersonSilvaa
AndersonSilvaa
AndersonSilvaa
Junior Member
21
16-03-2020, 05:19 AM
#28
(10-03-2020, 10:56 AM)X3non
(10-03-2020, 04:14 AM)AndersonSilvaa I can't unlock the bootloader and then I can't flash anything. And I also didn't find XT1758 rom for RSD or commands to flash files one by one

the firmwares @ https://mirrors.lolinet.com/firmware/mot.../official/ should be RSD compatible, you can try it out with RSD
you won't be able to manually flash files one by one in fastboot on a locked bootloader except you're using RSDlite tool
Sorry for the delay, I was very busy and tested different versions of the RSD and also firmware, but I was not successful, the RSD itself does not even recognize the device. But fastboot works just like you in the previous images.
AndersonSilvaa
AndersonSilvaa
AndersonSilvaa
Junior Member
21
16-03-2020, 05:32 AM
#29
(10-03-2020, 10:56 AM)X3non
(10-03-2020, 04:14 AM)AndersonSilvaa I can't unlock the bootloader and then I can't flash anything. And I also didn't find XT1758 rom for RSD or commands to flash files one by one

the firmwares @ https://mirrors.lolinet.com/firmware/mot.../official/ should be RSD compatible, you can try it out with RSD
you won't be able to manually flash files one by one in fastboot on a locked bootloader except you're using RSDlite tool
I'm not sure, but I think it might help:

Code:

$ fastboot getvar all
(bootloader) max-download-size: 0x8000000
(bootloader) partition-size:flashinfo: 1000000
(bootloader) partition-type:flashinfo: raw data
(bootloader) partition-size:userdata: 32000000
(bootloader) partition-type:userdata: ext4
(bootloader) partition-size:cache: 19000000
(bootloader) partition-type:cache: ext4
(bootloader) partition-size:system: c0000000
(bootloader) partition-type:system: ext4
(bootloader) partition-size:metadata: 2480000
(bootloader) partition-type:metadata: raw data
(bootloader) partition-size:nvdata: 2000000
(bootloader) partition-type:nvdata: ext4
(bootloader) partition-size:frp: 100000
(bootloader) partition-type:frp: raw data
(bootloader) partition-size:efuse: 80000
(bootloader) partition-type:efuse: raw data
(bootloader) partition-size:tee2: 500000
(bootloader) partition-type:tee2: raw data
(bootloader) partition-size:tee1: 500000
(bootloader) partition-type:tee1: raw data
(bootloader) partition-size:keystore: 800000
(bootloader) partition-type:keystore: raw data
(bootloader) partition-size:secro: 600000
(bootloader) partition-type:secro: raw data
(bootloader) partition-size:oemkeystore: 200000
(bootloader) partition-type:oemkeystore: raw data
(bootloader) partition-size:seccfg: 80000
(bootloader) partition-type:seccfg: raw data
(bootloader) partition-size:expdb: a00000
(bootloader) partition-type:expdb: raw data
(bootloader) partition-size:logo: 800000
(bootloader) partition-type:logo: raw data
(bootloader) partition-size:recovery: 1000000
(bootloader) partition-type:recovery: raw data
(bootloader) partition-size:boot: 1000000
(bootloader) partition-type:boot: raw data
(bootloader) partition-size:para: 80000
(bootloader) partition-type:para: raw data
(bootloader) partition-size:lk: 80000
(bootloader) partition-type:lk: raw data
(bootloader) partition-size:protect2: a00000
(bootloader) partition-type:protect2: ext4
(bootloader) partition-size:protect1: a00000
(bootloader) partition-type:protect1: ext4
(bootloader) partition-size:nvram: 500000
(bootloader) partition-type:nvram: raw data
(bootloader) partition-size:proinfo: 300000
(bootloader) partition-type:proinfo: raw data
(bootloader) partition-size:preloader: 40000
(bootloader) partition-type:preloader: raw data
(bootloader) ro.carrier: trueth
(bootloader) radio: 5
(bootloader) kernel.version[0]: Linux version 3.18.35+
(bootloader) kernel.version[1]: (hanhongbo@dell-PowerEdge-R730)
(bootloader) kernel.version[2]: gcc version 4.8 (GCC)
(bootloader) kernel.version[3]: 1 SMP PREEMPT
(bootloader) kernel.version[4]: 2017-11-15:19:14:20
(bootloader) ro.build.fingerprint[1]: motorola/namath_58/namath:7.0/NRD
(bootloader) ro.build.fingerprint[2]: D90M.003/1510743882:user/release-
(bootloader) ro.build.fingerprint[3]: -keys
(bootloader) ro.build.version.mtk[1]: alps-mp-n0.mp1-V1.0.2_wt6737m.65.
(bootloader) ro.build.version.mtk[2]: .n_P89
(bootloader) ro.build.version.full[1]: Blur_Version.25.21.03.namath_58.
(bootloader) ro.build.version.full[2]: trueth.en.US
(bootloader) imei1: 356497085328530
(bootloader) imei2: 356497085328548
(bootloader) boot reason: wdt_by_pass_pwk
(bootloader) hwrev: M11
(bootloader) CID: 0x0032
(bootloader) SKU: XT1758
(bootloader) CPU: "MT6735"
(bootloader) serialno: ZW322HF7ZH
(bootloader) off-mode-charge: 1
(bootloader) warranty: yes
(bootloader) securestate: no
(bootloader) hwsecure: yes
(bootloader) kernel: lk
(bootloader) board: WT98736B32_EA1
(bootloader) product: WT98736B32_EA1
(bootloader) Ram size: 1GB
(bootloader) emmc: KMFN60012M_B214
(bootloader) storage-type: emmc
(bootloader) version-preloader: 0.1.00
(bootloader) version: 0.5
all: Done!!
finished. total time: 0.006s
X3non
X3non
X3non
Recognized Contributor
22,062
16-03-2020, 10:49 AM
#30



(16-03-2020, 05:19 AM)AndersonSilvaa Sorry for the delay, I was very busy and tested different versions of the RSD and also firmware, but I was not successful, the RSD itself does not even recognize the device. But fastboot works just like you in the previous images.

your device should be in fastboot mode (and detected correctly in device manager, if not then download and install the drivers @ http://www.mediafire.com/file/52f9nzkj5q...0.zip/file ) before attempting to connect to rsdlite software


(16-03-2020, 05:32 AM)AndersonSilvaa I'm not sure, but I think it might help:
...
(bootloader) ro.carrier: trueth
...

it does help in identifying the right firmware. within the namath firmware list, you'll find trueth at the very end of the list. that should be the right firmware for your device

the output doesn't tell if your bootloader is unlocked though, you could try flashing a file e.g boot.img from within the trueth firmware using fastboot to see if it works (i.e if bootloader is unlocked)
"fastboot flash boot boot.img"

if it does then you can flash the rest except preloader using fastboot but if it doesn't then it means bootloader is still locked, use rsdlite to flash instead
Pages (4): Previous 1 2 3 4 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram