Hovatek Forum MOBILE Android Camon 11 CF7K dead
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


Camon 11 CF7K dead

Camon 11 CF7K dead

Kelvin Ian
Kelvin Ian
Kelvin Ian
Newbie
3
16-03-2020, 05:21 PM
#1



Hi. I flashed my camon 11, build CF7k-H6...
I cannot remember it all, but it began with H6. I used the Transsion tool, with the ROM you guys have provided for camon 11. The flashing was successful, although my device became lifeless after completion. Only the front LED lights up when I connect a charger. Removing the battery has not helped at all. Please advice. Thank you
This post was last modified: 16-03-2020, 08:22 PM by Kelvin Ian.
xerxes
xerxes
xerxes
Senior Member
8,355
16-03-2020, 10:52 PM
#2
(16-03-2020, 05:21 PM)Kelvin Ian Hi. I flashed my camon 11, build CF7k-H6...
I cannot remember it all, but it began with H6. I used the Transsion tool, with the ROM you guys have provided for camon 11. The flashing was successful, although my device became lifeless after completion. Only the front LED lights up when I connect a charger. Removing the battery has not helped at all. Please advice. Thank you

might be an incompatible firmware issue.
what was wrong with the phone before flashing?
try leaving the phone connected to a charger for a few hours before power on.
Kelvin Ian
Kelvin Ian
Kelvin Ian
Newbie
3
16-03-2020, 11:03 PM
#3
Thank you for taking the time to reply. 
I had rooted it using the magisk patch boot img method. It worked, but i lost wifi and Bluetooth functionality. So i decided to flash the stock rom.
I've had it connected to power for almost 12 hours now, no change still. 
 Quick question, can the Transsion software allow you to flash an incompatible ROM?
This post was last modified: 16-03-2020, 11:03 PM by Kelvin Ian.
X3non
X3non
X3non
Recognized Contributor
22,062
17-03-2020, 10:10 AM
#4
(16-03-2020, 11:03 PM)Kelvin Ian Thank you for taking the time to reply. 
I had rooted it using the magisk patch boot img method. It worked, but i lost wifi and Bluetooth functionality. So i decided to flash the stock rom...

you only needed to restore stock boot not the entire rom


(16-03-2020, 11:03 PM)Kelvin Ian ...I've had it connected to power for almost 12 hours now, no change still...

disconnect / reconnect the battery of the device (disassemble the back cover to get to the battery clip) then connect to a charging source and confirm if the device is still totally dead or not


(16-03-2020, 11:03 PM)Kelvin Ian  Quick question, can the Transsion software allow you to flash an incompatible ROM?

Not fully tested so can't say if this is possible or not. one thing is certain, you won't be allowed to flash firmware from a different model even if the two devices have the same chipset ie wrong firmware from a different model
Kelvin Ian
Kelvin Ian
Kelvin Ian
Newbie
3
17-03-2020, 05:01 PM
#5



Thank you, although I went to Carlcare and they sorted it in less than 10 minutes.

Now, a completely unrelated question. Is there a known fix for magisk breaking wifi and bluetooth
X3non
X3non
X3non
Recognized Contributor
22,062
18-03-2020, 09:44 AM
#6
(17-03-2020, 05:01 PM)Kelvin Ian ...
Now, a completely unrelated question. Is there a known fix for magisk breaking wifi and bluetooth

Either upgrade or downgrade the OS to a different build then retry flashing magisk_patched boot
OR alternatively if you just need to get root, manually patch boot to remove dm_verity > flash twrp then flash supersu zip in twrp
This post was last modified: 18-03-2020, 09:45 AM by X3non.
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram