Hovatek Forum MOBILE Android S_FT_Download_Fail (4008)
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


S_FT_Download_Fail (4008)

S_FT_Download_Fail (4008)

Pages (4): Previous 1 2 3 4 Next
Aditya11
Aditya11
Aditya11
Junior Member
15
08-04-2020, 02:22 PM
#21



(08-04-2020, 10:02 AM)X3non
(07-04-2020, 10:13 PM)Aditya11 1. I have tried to "flashing only the system.img using spft" there at 10% is has stuck and same error "4008" occurs.
...

adb commands don't work while a device is in fastboot mode. it should have been "fastboot devices" but it not necessary as your device is clearly detected
copy the system.img of that firmware you flashed through spft into the folder where you have the fastboot binary then retry the fastboot command for flashing system.img
Hi...
1. I have simple connect the tablet to pc whereby i have just press the power button of table wherein only the lenovo logo is appearing.
2. Now i have copy the system.img file in folder of adb folder ( i have attached the screenshot of it).
3. Now firstly on passing the cmd "adb devices" it is not showing my devices..
4. And on entering the cmd of "fastboot flash system.img" " waiting for device" msg is appearing...( i have attached the screenshot of it resp)..
Attached Files
.jpg
14_Screen shot_Cmd_Flashboot flash system.img.jpg
Size: 197.99 KB / Downloads: 9
X3non
X3non
X3non
Recognized Contributor
22,062
08-04-2020, 03:47 PM
#22
(08-04-2020, 02:22 PM)Aditya11 ...

you're to boot your phone into fastboot mode before connecting to the PC, repeat the procedure as you did it the previous time
Aditya11
Aditya11
Aditya11
Junior Member
15
08-04-2020, 06:00 PM
#23
(08-04-2020, 03:47 PM)X3non
(08-04-2020, 02:22 PM)Aditya11 ...

you're to boot your phone into fastboot mode before connecting to the PC, repeat the procedure as you did it the previous time
Hi..
1. I have done as per ur instruction, after entering the cmd "Flashboot flash system system.img" the process is stuck on "erasing system...", i have kept as it is for half an hour..but nothing goes else..
2. I have also "Flashboot devices" cmd and it has detected the tablet...(I'm attaching the screen shot of the same resp)
This post was last modified: 08-04-2020, 10:07 PM by Aditya11.
X3non
X3non
X3non
Recognized Contributor
22,062
09-04-2020, 09:36 AM
#24
(08-04-2020, 06:00 PM)Aditya11 ...

copy the system.img into c:\adb
extract the contents of ADB and fastboot v1.0.41 into c:\adb (overwrite existing items)
in powershell, type
Code:

cd c:\adb
fastboot flash system system.img

BTW why is the file size of the system.img looking abnormal, you have 7,66,497
check the properties of the file
Aditya11
Aditya11
Aditya11
Junior Member
15
09-04-2020, 10:27 AM
#25



(09-04-2020, 09:36 AM)X3non
(08-04-2020, 06:00 PM)Aditya11 ...

copy the system.img into c:\adb
extract the contents of ADB and fastboot v1.0.41 into c:\adb (overwrite existing items)
in powershell, type
Code:

cd c:\adb
fastboot flash system system.img

BTW why is the file size of the system.img looking abnormal, you have 7,66,497
check the properties of the file

Hi..
1. I don't know w.r.t. file size of system.img as i have download it from yadi (B6000_A422_000_084_140310_WW_CALL) link already i have mention. Also i have download from another site Lenovo_Yoga_Tablet_8_B6000_MT6589_A442_001_026_141030_WW_3GDATA & in it the size of system.img is 878885.
2. As per ur instruction i have tried with both the different size of system.img but an error is appearing i.e. "Failed (Write to device failed in SendBuffer() Unknown error)

3. I'm attaching the both screen shot of cmd scrren alongwith the tablet % processing screen too..

Once again thanks...
X3non
X3non
X3non
Recognized Contributor
22,062
09-04-2020, 06:27 PM
#26
(09-04-2020, 10:27 AM)Aditya11 ...
2. As per ur instruction i have tried with both the different size of system.img but an error is appearing i.e. "Failed (Write to device failed in SendBuffer() Unknown error)...

it seems like there's a problem with your device emmc chip (hardware), try either of these commands
Code:

fastboot erase system
fastboot format:ext4 system

if any of them works then retry the flashing command
if none of the above works you might consider replacing the emmc
Aditya11
Aditya11
Aditya11
Junior Member
15
09-04-2020, 09:21 PM
#27
(09-04-2020, 06:27 PM)X3non
(09-04-2020, 10:27 AM)Aditya11 ...
2. As per ur instruction i have tried with both the different size of system.img but an error is appearing i.e. "Failed (Write to device failed in SendBuffer() Unknown error)...

it seems like there's a problem with your device emmc chip (hardware), try either of these commands
Code:

fastboot erase system
fastboot format:ext4 system

if any of them works then retry the flashing command
if none of the above works you might consider replacing the emmc

[quote pid='190081' dateline='1586453222']
Hi..
1. I have tried both the command, but unfortunately error is appearing...screenshot i have attached pls kindly see it once...if any mistake i have made in passing the cmd.
2. Lastly my only requirement is to watch movies only, so is there any way out to do that...i.e. to install any other software such as windows or any else...just to play movies..
3.Can i myself change the emmc...and should i go for it..what's ur opinion..
4.Lastly, Really...Lot of thanks for your kind support and help....thanks once again.

[/quote]
Attached Files
X3non
X3non
X3non
Recognized Contributor
22,062
10-04-2020, 10:28 AM
#28
(09-04-2020, 09:21 PM)Aditya11 Hi..
1. I have tried both the command, but unfortunately error is appearing...screenshot i have attached pls kindly see it once...if any mistake i have made in passing the cmd.
2. Lastly my only requirement is to watch movies only, so is there any way out to do that...i.e. to install any other software such as windows or any else...just to play movies..
3.Can i myself change the emmc...and should i go for it..what's ur opinion..
4.Lastly, Really...Lot of thanks for your kind support and help....thanks once again.

1. wasn't sure which of the commands but it turns out to be the erase command which doesn't seem like it ever completed
2&3. In the current state, there's really nothing you could use the device for and to replace emmc, you'll need to take the device to an experienced phone hardware repair technician
Aditya11
Aditya11
Aditya11
Junior Member
15
10-04-2020, 11:15 AM
#29
(10-04-2020, 10:28 AM)X3non
(09-04-2020, 09:21 PM)Aditya11 Hi..
1. I have tried both the command, but unfortunately error is appearing...screenshot i have attached pls kindly see it once...if any mistake i have made in passing the cmd.
2. Lastly my only requirement is to watch movies only, so is there any way out to do that...i.e. to install any other software such as windows or any else...just to play movies..
3.Can i myself change the emmc...and should i go for it..what's ur opinion..
4.Lastly, Really...Lot of thanks for your kind support and help....thanks once again.

1. wasn't sure which of the commands but it turns out to be the erase command which doesn't seem like it ever completed
2&3. In the current state, there's really nothing you could use the device for and to replace emmc, you'll need to take the device to an experienced phone hardware repair technician
Okay...Thanks for ur help and guidance...
Really thanks once again..So finally i am putting the tablet in scrap..okay bye... Shy Shy
hovatek
hovatek
hovatek
Administrator
49,570
11-05-2020, 08:56 AM
#30



(10-04-2020, 11:15 AM)Aditya11 Okay...Thanks for ur help and guidance...
Really thanks once again..So finally i am putting the tablet in scrap..okay bye... Shy Shy

One last shot would be to flash a custom recovery (CWM or TWRP) and try flash a custom in the TWRP

Note!
We have a reply schedule for Free Support. Please upgrade to Private Support if you can't wait.
Pages (4): Previous 1 2 3 4 Next
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram