[Aditya11]

Hi..
I have to flash my "Lenovo Yoga Tab B6000" since Tool_DL_Image_Fail  is appearing.
I am using "SP_Flash_Tool_v5.1716_Win",  "B6000_A442_001_019_140609_WW_CALL", "MT6589_Android_scatter_emmc".
After selecting "Format All + Download", clicking on "Download"...then while "Downloading Flash" at 32% the download stop and error comes "S_FT_Download_Fail (4008)", "BROM_DLL_V5.Log".
I have also gone to in SP > Options > download > and tick / enable the USB Checksum, Storage Checksum, but still the above error is appearing.
I will be thankful for your kind help and guidance in solving the above issue of mine, thanks once again.

[xerxes]

Hi..
I have to flash my "Lenovo Yoga Tab B6000" since Tool_DL_Image_Fail  is appearing.
I am using "SP_Flash_Tool_v5.1716_Win",  "B6000_A442_001_019_140609_WW_CALL", "MT6589_Android_scatter_emmc".
After selecting "Format All + Download", clicking on "Download"...then while "Downloading Flash" at 32% the download stop and error comes "S_FT_Download_Fail (4008)", "BROM_DLL_V5.Log".
I have also gone to in SP > Options > download > and tick / enable the USB Checksum, Storage Checksum, but still the above error is appearing.
I will be thankful for your kind help and guidance in solving the above issue of mine, thanks once again.

Do you also get an error when backing up firmware with miracle box? Try backup @ https://forum.hovatek.com/thread-13347.html

[Aditya11]

Hi..
I have to flash my "Lenovo Yoga Tab B6000" since Tool_DL_Image_Fail  is appearing.
I am using "SP_Flash_Tool_v5.1716_Win",  "B6000_A442_001_019_140609_WW_CALL", "MT6589_Android_scatter_emmc".
After selecting "Format All + Download", clicking on "Download"...then while "Downloading Flash" at 32% the download stop and error comes "S_FT_Download_Fail (4008)", "BROM_DLL_V5.Log".
I have also gone to in SP > Options > download > and tick / enable the USB Checksum, Storage Checksum, but still the above error is appearing.
I will be thankful for your kind help and guidance in solving the above issue of mine, thanks once again.

Do you also get an error when backing up firmware with miracle box? Try backup @ https://forum.hovatek.com/thread-13347.html

Thanks for ur kind help...but i am not using miracle box and also i am not taking the backup of firmware....
Also i am  not much familiar with this things...just by watching youtube about how to flash up your tablet i am doing, earlier i have already done flash of my tablet and it was done smoothly....but now it showing the above error..

[X3non]

Thanks for ur kind help...but i am not using miracle box and also i am not taking the backup of firmware....
Also i am  not much familiar with this things...just by watching youtube about how to flash up your tablet i am doing, earlier i have already done flash of my tablet and it was done smoothly....but now it showing the above error..

try the fixes for the 4008 error @ https://forum.hovatek.com/thread-439.html
btw why are you trying to reflash the device a second time?

[Aditya11]

Thanks for ur kind help...but i am not using miracle box and also i am not taking the backup of firmware....
Also i am  not much familiar with this things...just by watching youtube about how to flash up your tablet i am doing, earlier i have already done flash of my tablet and it was done smoothly....but now it showing the above error..

try the fixes for the 4008 error @ https://forum.hovatek.com/thread-439.html
btw why are you trying to reflash the device a second time?

Thanks..but i have tried the things mention wrt error 4008...nothing goes well.

Also 8 months ago i have flash the tablet. Now the issue is only the Logo of lenovo is appearing alongwith "Tool TDL Image Fail!" and after 2 min the tablet goes off and again reboot and same logo with Tool tdl image fail! is appears....and same process goes on continuously. Even i have tried for factory reset but their also "Tool Tdl image fail" message appears..

[X3non]

Thanks..but i have tried the things mention wrt error 4008...nothing goes well.

Also 8 months ago i have flash the tablet. Now the issue is only the Logo of lenovo is appearing alongwith "Tool TDL Image Fail!" and after 2 min the tablet goes off and again reboot and same logo with Tool tdl image fail! is appears....and same process goes on continuously. Even i have tried for factory reset but their also "Tool Tdl image fail" message appears..

try the fix @ https://forum.hovatek.com/thread-10780.html

[Aditya11]

Thanks..but i have tried the things mention wrt error 4008...nothing goes well.

Also 8 months ago i have flash the tablet. Now the issue is only the Logo of lenovo is appearing alongwith "Tool TDL Image Fail!" and after 2 min the tablet goes off and again reboot and same logo with Tool tdl image fail! is appears....and same process goes on continuously. Even i have tried for factory reset but their also "Tool Tdl image fail" message appears..

try the fix @ https://forum.hovatek.com/thread-10780.html

Thanks X3non

But still not going well as i have already tried too..

Now lastly, a last time i want to try with a fresh startup otherwise i will scrap the tablet..

I just don't want to waste ur time..so just last time i will tell you what actually happen...

"I was transferring a movie from pc to tablet and during the process the tablet hangs and on rebooting the tablet "Tool DL Image Fail" alongwith Lenovo Log. (Note : I think so due to memory issue i.e. all the memory has been used in software and movie i.e 16gb and so it hangs)

Now i have already download "SP_Flash_Tool_v5.1716_Win",  "B6000_A442_001_019_140609_WW_CALL", "MT6589_Android_scatter_emmc".

Now if you thing any other software i have to download i.e. miracle box or anything i will do...and if it possible for you to do help me...
then i am ready to connect you via anydesk...i will make sure that everything must be ready for you...and as per ur time schedule and if not...then...kindly provide the tutorial of it respectively..

And once again thanks for ur kind help.. 

I am attaching herewith : the screen shot as
1 : Lenovo model No
2: When table is connected to laptop = charging image appears
3 : when not connected = lenovo logo + Tool DL image fails

[X3non]

...
I am attaching herewith : the screen shot as
1 : Lenovo model No
2: When table is connected to laptop = charging image appears
3 : when not connected = lenovo logo + Tool DL image fails

there's no screenshot attached, attach a full screenshot of the error you get in spft when trying to flash. you can upload the screenshot(s) to imgur.com then post the links here
is your device model s6000H or s6000F?
use the format tab to format all except bootloader, then confirm if your device still able to power on?

[Aditya11]

1_Lenovo model no.jpg Size: 237.67 KB  Downloads: 8

2_Charging Image.jpg Size: 146.65 KB  Downloads: 6

3_Tool DL Image Fail.jpg Size: 171.22 KB  Downloads: 3

4_SP_Tool_Error_Format all_&_Download.jpg Size: 211.56 KB  Downloads: 7

5_SP_Tool_Error_Untick Preloader.jpg Size: 205.29 KB  Downloads: 4

6_SP_Tool_Error_Untick Booting.jpg Size: 210.05 KB  Downloads: 4

2_Charging Image.jpg Size: 146.65 KB  Downloads: 6

1_Lenovo model no.jpg Size: 237.67 KB  Downloads: 8

X3non pid='189591' dateline='1585995050']

...
I am attaching herewith : the screen shot as
1 : Lenovo model No
2: When table is connected to laptop = charging image appears
3 : when not connected = lenovo logo + Tool DL image fails

there's no screenshot attached, attach a full screenshot of the error you get in spft when trying to flash. you can upload the screenshot(s) to imgur.com then post the links here
is your device model s6000H or s6000F?
use the format tab to format all except bootloader, then confirm if your device still able to power on?

Thanks for still giving ur valuable time for solving my problem..
I'm herewith attaching the files and also i have tried above also still same error..

[X3non]

...

try flashing again using the "firmware upgrade" option in spft
if you still get the same error, then try flashing a different firmware, you can try the jellybean 4.2.2 firmware @ https://forum.hovatek.com/thread-10450.html