Samsung s7 edge G935u won't flash
Samsung s7 edge G935u won't flash
(03-04-2020, 10:28 AM)alimalamm Hi guys! They brought me a samsung s7 edge G935u Which is stuck at the boot "starting android".
I tried to hard reset it through the recovery mode but it still acts thesame. From the recovery menu i could read the exact pda version. So i downloaded 2 different stock rom from sfirmware.com.
But when i tried to flash it fails at appsbootmbnl. So i don't know what to do.
Please help me
Envoyé de mon CUBOT H3 en utilisant Tapatalk
(03-04-2020, 10:28 AM)alimalamm Hi guys! They brought me a samsung s7 edge G935u Which is stuck at the boot "starting android".
I tried to hard reset it through the recovery mode but it still acts thesame. From the recovery menu i could read the exact pda version. So i downloaded 2 different stock rom from sfirmware.com.
But when i tried to flash it fails at appsbootmbnl. So i don't know what to do.
Please help me
Envoyé de mon CUBOT H3 en utilisant Tapatalk
(15-04-2020, 01:51 PM)alimalamm I have tried 3 different stock firmwares for te galaxy s7 edge
G935u,G935A and G935t but still yet it won't flash.
So i had the idea to flash a combination file for galaxy s edge and it successfully flashed but when it boots and i want to enter the settings, the phone freezes then reboot and show and error.
...
Envoyé de mon CUBOT H3 en utilisant Tapatalk
(15-04-2020, 06:45 PM)X3nonThis build you saw in the picture i send is the build from the recovery of the combination file i installed in it(15-04-2020, 01:51 PM)alimalamm I have tried 3 different stock firmwares for te galaxy s7 edge
G935u,G935A and G935t but still yet it won't flash.
So i had the idea to flash a combination file for galaxy s edge and it successfully flashed but when it boots and i want to enter the settings, the phone freezes then reboot and show and error.
...
Envoyé de mon CUBOT H3 en utilisant Tapatalk
have you tried flashing firmware for the exact same firmware build currently on the phone? https://androidfilehost.com/?fid=4349826312261766730
(03-04-2020, 07:21 PM)freshtytI have shared a screen shot of errors that i have with odin 3 and z3x box samsung tool pro(03-04-2020, 10:28 AM)alimalamm Hi guys! They brought me a samsung s7 edge G935u Which is stuck at the boot "starting android".
I tried to hard reset it through the recovery mode but it still acts thesame. From the recovery menu i could read the exact pda version. So i downloaded 2 different stock rom from sfirmware.com.
But when i tried to flash it fails at appsbootmbnl. So i don't know what to do.
Please help me
Envoyé de mon CUBOT H3 en utilisant Tapatalk
attach a screenshot of the error message you get while flashing
(17-04-2020, 10:04 AM)X3nonThis what i get when i try to flash(16-04-2020, 11:19 AM)alimalamm ...
Was G935uuesacsf1 which is america xaa version
Envoyé de mon CUBOT H3 en utilisant Tapatalk
what happens when you try to flash G935uuesacsf1 firmware build?
you screenshots are not visible
(21-04-2020, 07:43 PM)alimalamm This what i get when i try to flash
Envoyé de mon Nokia 5.1 Plus en utilisant TapatalkCode:ID:0/045> Odin engine v(ID:3.1301)..
<ID:0/045> File analysis..
<ID:0/045> Total Binary size: 5526 M
<ID:0/045> SetupConnection..
<ID:0/045> Initialzation..
<ID:0/045> Set PIT file..
<ID:0/045> DO NOT TURN OFF TARGET!!
<ID:0/045> Get PIT for mapping..
<ID:0/045> Firmware update start..
<ID:0/045> NAND Write Start!!
<ID:0/045> SingleDownload.
<ID:0/045> emmc_appsboot.mbn
<ID:0/045> lksecapp.mbn
<ID:0/045> FAIL! (Auth)
<ID:0/045>
<ID:0/045> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)