Hovatek Forum MOBILE Android TECNO F1 NOT HARD RESETTING OR FULL FLASHING
Can't login? Please, reset your password.
Hovatek is recruiting! Apply Now


TECNO F1 NOT HARD RESETTING OR FULL FLASHING

TECNO F1 NOT HARD RESETTING OR FULL FLASHING

mash254
mash254
mash254
Enthusiastic Member
6
09-04-2020, 02:55 AM
#1



TECNO F1 NOT HARD RESETTING OR FULL FLASHING
SAME TO TECNO S1
xerxes
xerxes
xerxes
Senior Member
8,355
09-04-2020, 10:10 AM
#2
(09-04-2020, 02:55 AM)mash254 TECNO F1 NOT HARD RESETTING OR FULL FLASHING
SAME TO TECNO S1

State the phone's build no.
What exactly do you mean by not hard resetting?
are you able to boot and wipe data in recovery but data is intact on the phone or not able to boot recovery mode at all?
This post was last modified: 09-04-2020, 10:14 AM by xerxes.
mash254
mash254
mash254
Enthusiastic Member
6
09-04-2020, 10:52 PM
#3
(09-04-2020, 10:10 AM)innagee
(09-04-2020, 02:55 AM)mash254 TECNO F1 NOT HARD RESETTING OR FULL FLASHING
SAME TO TECNO S1

State the phone's build no.
What exactly do you mean by not hard resetting?
are you able to boot and wipe data in recovery but data is intact on the phone or not able to boot recovery mode at all?
This post was last modified: 09-04-2020, 10:53 PM by mash254.
mash254
mash254
mash254
Enthusiastic Member
6
09-04-2020, 10:54 PM
#4
yes data is not resetting
X3non
X3non
X3non
Recognized Contributor
22,062
10-04-2020, 01:05 PM
#5



(09-04-2020, 10:54 PM)mash254 yes data is not resetting

did you actually flash firmware successfully and the device powers on and boots to homescreen without going through initial setup?
if yes, then the emmc chip on your device is faulty
mash254
mash254
mash254
Enthusiastic Member
6
07-05-2020, 09:14 PM
#6
Meaning all F1 has the same issue because i have encountered 3phones tecno f1 same issues. So how do i resolve emmc issue

Sent from my Infinix-X600 using Hovatek Mobile
X3non
X3non
X3non
Recognized Contributor
22,062
08-05-2020, 12:17 PM
#7
(07-05-2020, 09:14 PM)mash254 Meaning all F1 has the same issue because i have encountered 3phones tecno f1 same issues. So how do i resolve emmc issue

Sent from my Infinix-X600 using Hovatek Mobile

either replace the emmc or try writing directly to emmc using an emmc hardware tool box
Users browsing this thread:
 1 Guest(s)
Users browsing this thread:
 1 Guest(s)
YtWhTl
live chat
whatsapp telegram instagram